Discussion:
[PATCH 3.12 05/72] selinux: correctly label /proc inodes in use before the policy is loaded
(too old to reply)
Jiri Slaby
2014-04-18 09:21:38 UTC
Permalink
From: Paul Moore <***@redhat.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit f64410ec665479d7b4b77b7519e814253ed0f686 upstream.

This patch is based on an earlier patch by Eric Paris, he describes
the problem below:

"If an inode is accessed before policy load it will get placed on a
list of inodes to be initialized after policy load. After policy
load we call inode_doinit() which calls inode_doinit_with_dentry()
on all inodes accessed before policy load. In the case of inodes
in procfs that means we'll end up at the bottom where it does:

/* Default to the fs superblock SID. */
isec->sid = sbsec->sid;

if ((sbsec->flags & SE_SBPROC) && !S_ISLNK(inode->i_mode)) {
if (opt_dentry) {
isec->sclass = inode_mode_to_security_class(...)
rc = selinux_proc_get_sid(opt_dentry,
isec->sclass,
&sid);
if (rc)
goto out_unlock;
isec->sid = sid;
}
}

Since opt_dentry is null, we'll never call selinux_proc_get_sid()
and will leave the inode labeled with the label on the superblock.
I believe a fix would be to mimic the behavior of xattrs. Look
for an alias of the inode. If it can't be found, just leave the
inode uninitialized (and pick it up later) if it can be found, we
should be able to call selinux_proc_get_sid() ..."

On a system exhibiting this problem, you will notice a lot of files in
/proc with the generic "proc_t" type (at least the ones that were
accessed early in the boot), for example:

# ls -Z /proc/sys/kernel/shmmax | awk '{ print $4 " " $5 }'
system_u:object_r:proc_t:s0 /proc/sys/kernel/shmmax

However, with this patch in place we see the expected result:

# ls -Z /proc/sys/kernel/shmmax | awk '{ print $4 " " $5 }'
system_u:object_r:sysctl_kernel_t:s0 /proc/sys/kernel/shmmax

Cc: Eric Paris <***@redhat.com>
Signed-off-by: Paul Moore <***@redhat.com>
Acked-by: Eric Paris <***@redhat.com>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
security/selinux/hooks.c | 36 +++++++++++++++++++++++++++---------
1 file changed, 27 insertions(+), 9 deletions(-)

diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 25d5ebaf25f9..630b8adf0ce5 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -1386,15 +1386,33 @@ static int inode_doinit_with_dentry(struct inode *inode, struct dentry *opt_dent
isec->sid = sbsec->sid;

if ((sbsec->flags & SE_SBPROC) && !S_ISLNK(inode->i_mode)) {
- if (opt_dentry) {
- isec->sclass = inode_mode_to_security_class(inode->i_mode);
- rc = selinux_proc_get_sid(opt_dentry,
- isec->sclass,
- &sid);
- if (rc)
- goto out_unlock;
- isec->sid = sid;
- }
+ /* We must have a dentry to determine the label on
+ * procfs inodes */
+ if (opt_dentry)
+ /* Called from d_instantiate or
+ * d_splice_alias. */
+ dentry = dget(opt_dentry);
+ else
+ /* Called from selinux_complete_init, try to
+ * find a dentry. */
+ dentry = d_find_alias(inode);
+ /*
+ * This can be hit on boot when a file is accessed
+ * before the policy is loaded. When we load policy we
+ * may find inodes that have no dentry on the
+ * sbsec->isec_head list. No reason to complain as
+ * these will get fixed up the next time we go through
+ * inode_doinit() with a dentry, before these inodes
+ * could be used again by userspace.
+ */
+ if (!dentry)
+ goto out_unlock;
+ isec->sclass = inode_mode_to_security_class(inode->i_mode);
+ rc = selinux_proc_get_sid(dentry, isec->sclass, &sid);
+ dput(dentry);
+ if (rc)
+ goto out_unlock;
+ isec->sid = sid;
}
break;
}
--
1.9.2
Jiri Slaby
2014-04-18 09:21:41 UTC
Permalink
3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit a94cdd1f4d30f12904ab528152731fb13a812a16 upstream.

In read_all_bytes, we do

unsigned char i;
...
bt->read_data[0] = BMC2HOST;
bt->read_count = bt->read_data[0];
...
for (i = 1; i <= bt->read_count; i++)
bt->read_data[i] = BMC2HOST;

If bt->read_data[0] == bt->read_count == 255, we loop infinitely in the
'for' loop. Make 'i' an 'int' instead of 'char' to get rid of the
overflow and finish the loop after 255 iterations every time.

Signed-off-by: Jiri Slaby <***@suse.cz>
Reported-and-debugged-by: Rui Hui Dian <***@novell.com>
Cc: Tomas Cech <***@suse.cz>
Cc: Corey Minyard <***@acm.org>
Cc: <openipmi-***@lists.sourceforge.net>
Signed-off-by: Corey Minyard <***@mvista.com>
Signed-off-by: Linus Torvalds <***@linux-foundation.org>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/char/ipmi/ipmi_bt_sm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c
index a22a7a502740..8156cafad11a 100644
--- a/drivers/char/ipmi/ipmi_bt_sm.c
+++ b/drivers/char/ipmi/ipmi_bt_sm.c
@@ -352,7 +352,7 @@ static inline void write_all_bytes(struct si_sm_data *bt)

static inline int read_all_bytes(struct si_sm_data *bt)
{
- unsigned char i;
+ unsigned int i;

/*
* length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode.
--
1.9.2
Jiri Slaby
2014-04-18 09:21:42 UTC
Permalink
From: Malahal Naineni <***@us.ibm.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit a1800acaf7d1c2bf6d68b9a8f4ab8560cc66555a upstream.

Avoid returning incorrect acl mask attributes when the server doesn't
support ACLs.

Signed-off-by: Malahal Naineni <***@us.ibm.com>
Signed-off-by: Trond Myklebust <***@primarydata.com>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
fs/nfs/nfs4xdr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index b2f842d0901b..1c2beb18a713 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -3405,7 +3405,7 @@ static int decode_attr_aclsupport(struct xdr_stream *xdr, uint32_t *bitmap, uint
{
__be32 *p;

- *res = ACL4_SUPPORT_ALLOW_ACL|ACL4_SUPPORT_DENY_ACL;
+ *res = 0;
if (unlikely(bitmap[0] & (FATTR4_WORD0_ACLSUPPORT - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_ACLSUPPORT)) {
--
1.9.2
Jiri Slaby
2014-04-18 09:21:36 UTC
Permalink
From: Mikulas Patocka <***@redhat.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit 22c73795b101597051924556dce019385a1e2fa0 upstream.

This patch reorders reported frequencies from the highest to the lowest,
just like in other frequency drivers.

Signed-off-by: Mikulas Patocka <***@redhat.com>
Acked-by: Viresh Kumar <***@linaro.org>
Signed-off-by: Rafael J. Wysocki <***@intel.com>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/cpufreq/powernow-k6.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c
index 1624188e584f..4fe6521c30d5 100644
--- a/drivers/cpufreq/powernow-k6.c
+++ b/drivers/cpufreq/powernow-k6.c
@@ -37,17 +37,20 @@ MODULE_PARM_DESC(bus_frequency, "Bus frequency in kHz");

/* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */
static struct cpufreq_frequency_table clock_ratio[] = {
- {45, /* 000 -> 4.5x */ 0},
+ {60, /* 110 -> 6.0x */ 0},
+ {55, /* 011 -> 5.5x */ 0},
{50, /* 001 -> 5.0x */ 0},
+ {45, /* 000 -> 4.5x */ 0},
{40, /* 010 -> 4.0x */ 0},
- {55, /* 011 -> 5.5x */ 0},
- {20, /* 100 -> 2.0x */ 0},
- {30, /* 101 -> 3.0x */ 0},
- {60, /* 110 -> 6.0x */ 0},
{35, /* 111 -> 3.5x */ 0},
+ {30, /* 101 -> 3.0x */ 0},
+ {20, /* 100 -> 2.0x */ 0},
{0, CPUFREQ_TABLE_END}
};

+static const u8 index_to_register[8] = { 6, 3, 1, 0, 2, 7, 5, 4 };
+static const u8 register_to_index[8] = { 3, 2, 4, 1, 7, 6, 0, 5 };
+
static const struct {
unsigned freq;
unsigned mult;
@@ -91,7 +94,7 @@ static int powernow_k6_get_cpu_multiplier(void)

local_irq_enable();

- return clock_ratio[(invalue >> 5)&7].driver_data;
+ return clock_ratio[register_to_index[(invalue >> 5)&7]].driver_data;
}

static void powernow_k6_set_cpu_multiplier(unsigned int best_i)
@@ -111,7 +114,7 @@ static void powernow_k6_set_cpu_multiplier(unsigned int best_i)
write_cr0(cr0 | X86_CR0_CD);
wbinvd();

- outvalue = (1<<12) | (1<<10) | (1<<9) | (best_i<<5);
+ outvalue = (1<<12) | (1<<10) | (1<<9) | (index_to_register[best_i]<<5);

msrval = POWERNOW_IOPORT + 0x1;
wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
--
1.9.2
Jiri Slaby
2014-04-18 09:21:57 UTC
Permalink
From: Nikolay Aleksandrov <***@redhat.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit 24b9bf43e93e0edd89072da51cf1fab95fc69dec ]

I stumbled upon this very serious bug while hunting for another one,
it's a very subtle race condition between inet_frag_evictor,
inet_frag_intern and the IPv4/6 frag_queue and expire functions
(basically the users of inet_frag_kill/inet_frag_put).

What happens is that after a fragment has been added to the hash chain
but before it's been added to the lru_list (inet_frag_lru_add) in
inet_frag_intern, it may get deleted (either by an expired timer if
the system load is high or the timer sufficiently low, or by the
fraq_queue function for different reasons) before it's added to the
lru_list, then after it gets added it's a matter of time for the
evictor to get to a piece of memory which has been freed leading to a
number of different bugs depending on what's left there.

I've been able to trigger this on both IPv4 and IPv6 (which is normal
as the frag code is the same), but it's been much more difficult to
trigger on IPv4 due to the protocol differences about how fragments
are treated.

The setup I used to reproduce this is: 2 machines with 4 x 10G bonded
in a RR bond, so the same flow can be seen on multiple cards at the
same time. Then I used multiple instances of ping/ping6 to generate
fragmented packets and flood the machines with them while running
other processes to load the attacked machine.

*It is very important to have the _same flow_ coming in on multiple CPUs
concurrently. Usually the attacked machine would die in less than 30
minutes, if configured properly to have many evictor calls and timeouts
it could happen in 10 minutes or so.

An important point to make is that any caller (frag_queue or timer) of
inet_frag_kill will remove both the timer refcount and the
original/guarding refcount thus removing everything that's keeping the
frag from being freed at the next inet_frag_put. All of this could
happen before the frag was ever added to the LRU list, then it gets
added and the evictor uses a freed fragment.

An example for IPv6 would be if a fragment is being added and is at
the stage of being inserted in the hash after the hash lock is
released, but before inet_frag_lru_add executes (or is able to obtain
the lru lock) another overlapping fragment for the same flow arrives
at a different CPU which finds it in the hash, but since it's
overlapping it drops it invoking inet_frag_kill and thus removing all
guarding refcounts, and afterwards freeing it by invoking
inet_frag_put which removes the last refcount added previously by
inet_frag_find, then inet_frag_lru_add gets executed by
inet_frag_intern and we have a freed fragment in the lru_list.

The fix is simple, just move the lru_add under the hash chain locked
region so when a removing function is called it'll have to wait for
the fragment to be added to the lru_list, and then it'll remove it (it
works because the hash chain removal is done before the lru_list one
and there's no window between the two list adds when the frag can get
dropped). With this fix applied I couldn't kill the same machine in 24
hours with the same setup.

Fixes: 3ef0eb0db4bf ("net: frag, move LRU list maintenance outside of
rwlock")

CC: Florian Westphal <***@strlen.de>
CC: Jesper Dangaard Brouer <***@redhat.com>
CC: David S. Miller <***@davemloft.net>

Signed-off-by: Nikolay Aleksandrov <***@redhat.com>
Acked-by: Jesper Dangaard Brouer <***@redhat.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/ipv4/inet_fragment.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c
index c5313a9c019b..e15fb7b2db59 100644
--- a/net/ipv4/inet_fragment.c
+++ b/net/ipv4/inet_fragment.c
@@ -281,9 +281,10 @@ static struct inet_frag_queue *inet_frag_intern(struct netns_frags *nf,

atomic_inc(&qp->refcnt);
hlist_add_head(&qp->list, &hb->chain);
+ inet_frag_lru_add(nf, qp);
spin_unlock(&hb->chain_lock);
read_unlock(&f->lock);
- inet_frag_lru_add(nf, qp);
+
return qp;
}
--
1.9.2
Jiri Slaby
2014-04-18 09:21:53 UTC
Permalink
From: Chris Wilson <***@chris-wilson.co.uk>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit 46eeb2c144956e88197439b5ee5cf221a91b0a81 upstream.

If we fail to remove a conflicting fb driver, we need to abort the
loading of the second driver to avoid likely kernel panics.

Signed-off-by: Chris Wilson <***@chris-wilson.co.uk>
Cc: Jean-Christophe Plagniol-Villard <***@jcrosoft.com>
Cc: Tomi Valkeinen <***@ti.com>
Cc: linux-***@vger.kernel.org
Cc: dri-***@lists.freedesktop.org
Reviewed-by: Jani Nikula <***@intel.com>
Signed-off-by: Dave Airlie <***@redhat.com>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/video/fbmem.c | 31 +++++++++++++++++++++----------
include/linux/fb.h | 4 ++--
2 files changed, 23 insertions(+), 12 deletions(-)

diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index cde461932760..7309ac704e26 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1577,10 +1577,10 @@ static bool fb_do_apertures_overlap(struct apertures_struct *gena,
static int do_unregister_framebuffer(struct fb_info *fb_info);

#define VGA_FB_PHYS 0xA0000
-static void do_remove_conflicting_framebuffers(struct apertures_struct *a,
- const char *name, bool primary)
+static int do_remove_conflicting_framebuffers(struct apertures_struct *a,
+ const char *name, bool primary)
{
- int i;
+ int i, ret;

/* check all firmware fbs and kick off if the base addr overlaps */
for (i = 0 ; i < FB_MAX; i++) {
@@ -1599,22 +1599,29 @@ static void do_remove_conflicting_framebuffers(struct apertures_struct *a,
printk(KERN_INFO "fb: conflicting fb hw usage "
"%s vs %s - removing generic driver\n",
name, registered_fb[i]->fix.id);
- do_unregister_framebuffer(registered_fb[i]);
+ ret = do_unregister_framebuffer(registered_fb[i]);
+ if (ret)
+ return ret;
}
}
+
+ return 0;
}

static int do_register_framebuffer(struct fb_info *fb_info)
{
- int i;
+ int i, ret;
struct fb_event event;
struct fb_videomode mode;

if (fb_check_foreignness(fb_info))
return -ENOSYS;

- do_remove_conflicting_framebuffers(fb_info->apertures, fb_info->fix.id,
- fb_is_primary_device(fb_info));
+ ret = do_remove_conflicting_framebuffers(fb_info->apertures,
+ fb_info->fix.id,
+ fb_is_primary_device(fb_info));
+ if (ret)
+ return ret;

if (num_registered_fb == FB_MAX)
return -ENXIO;
@@ -1739,12 +1746,16 @@ int unlink_framebuffer(struct fb_info *fb_info)
}
EXPORT_SYMBOL(unlink_framebuffer);

-void remove_conflicting_framebuffers(struct apertures_struct *a,
- const char *name, bool primary)
+int remove_conflicting_framebuffers(struct apertures_struct *a,
+ const char *name, bool primary)
{
+ int ret;
+
mutex_lock(&registration_lock);
- do_remove_conflicting_framebuffers(a, name, primary);
+ ret = do_remove_conflicting_framebuffers(a, name, primary);
mutex_unlock(&registration_lock);
+
+ return ret;
}
EXPORT_SYMBOL(remove_conflicting_framebuffers);

diff --git a/include/linux/fb.h b/include/linux/fb.h
index ffac70aab3e9..8439a1600c1a 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -613,8 +613,8 @@ extern ssize_t fb_sys_write(struct fb_info *info, const char __user *buf,
extern int register_framebuffer(struct fb_info *fb_info);
extern int unregister_framebuffer(struct fb_info *fb_info);
extern int unlink_framebuffer(struct fb_info *fb_info);
-extern void remove_conflicting_framebuffers(struct apertures_struct *a,
- const char *name, bool primary);
+extern int remove_conflicting_framebuffers(struct apertures_struct *a,
+ const char *name, bool primary);
extern int fb_prepare_logo(struct fb_info *fb_info, int rotate);
extern int fb_show_logo(struct fb_info *fb_info, int rotate);
extern char* fb_get_buffer_offset(struct fb_info *info, struct fb_pixmap *buf, u32 size);
--
1.9.2
Jiri Slaby
2014-04-18 09:21:56 UTC
Permalink
From: Gerd Hoffmann <***@redhat.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit 121a6a17439b000b9699c3fa876636db20fa4107 upstream.

Explicitly set 1024x768 as default mode, so the display doesn't come up
with the largest supported mode.

While being at it drop first three drm_add_modes_noedid calls. As
drm_add_modes_noedid fills the mode list with modes from the database
*up to* the specified size it is pretty pointless to call it multiple
times with different sizes.

Signed-off-by: Gerd Hoffmann <***@redhat.com>
Signed-off-by: Dave Airlie <***@redhat.com>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/gpu/drm/cirrus/cirrus_mode.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/cirrus/cirrus_mode.c b/drivers/gpu/drm/cirrus/cirrus_mode.c
index 379a47ea99f6..3592616d484b 100644
--- a/drivers/gpu/drm/cirrus/cirrus_mode.c
+++ b/drivers/gpu/drm/cirrus/cirrus_mode.c
@@ -494,13 +494,12 @@ static struct drm_encoder *cirrus_encoder_init(struct drm_device *dev)

int cirrus_vga_get_modes(struct drm_connector *connector)
{
- /* Just add a static list of modes */
- drm_add_modes_noedid(connector, 640, 480);
- drm_add_modes_noedid(connector, 800, 600);
- drm_add_modes_noedid(connector, 1024, 768);
- drm_add_modes_noedid(connector, 1280, 1024);
+ int count;

- return 4;
+ /* Just add a static list of modes */
+ count = drm_add_modes_noedid(connector, 1280, 1024);
+ drm_set_preferred_mode(connector, 1024, 768);
+ return count;
}

static int cirrus_vga_mode_valid(struct drm_connector *connector,
--
1.9.2
Jiri Slaby
2014-04-18 09:21:54 UTC
Permalink
From: Adam Jackson <***@redhat.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit 13ba0ad4490c3dd08b15c430a7a01c6fb45d5bce upstream.

Calling this "conflicting" just makes people think there's a problem
when there's not.

Signed-off-by: Adam Jackson <***@redhat.com>
Reviewed-by: David Herrmann <***@gmail.com>
Signed-off-by: Tomi Valkeinen <***@ti.com>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/video/fbmem.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 7309ac704e26..b6d5008f361f 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1596,8 +1596,7 @@ static int do_remove_conflicting_framebuffers(struct apertures_struct *a,
(primary && gen_aper && gen_aper->count &&
gen_aper->ranges[0].base == VGA_FB_PHYS)) {

- printk(KERN_INFO "fb: conflicting fb hw usage "
- "%s vs %s - removing generic driver\n",
+ printk(KERN_INFO "fb: switching to %s from %s\n",
name, registered_fb[i]->fix.id);
ret = do_unregister_framebuffer(registered_fb[i]);
if (ret)
--
1.9.2
Jiri Slaby
2014-04-18 09:21:55 UTC
Permalink
From: Gerd Hoffmann <***@redhat.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit 3cf70dafd7bbbc91df0a9ecb081d46f9f3d867f6 upstream.

New helper function to set the preferred video mode. Can be called
after drm_add_modes_noedid if you don't want the largest supported
video mode be used by default.

Signed-off-by: Gerd Hoffmann <***@redhat.com>
Signed-off-by: Dave Airlie <***@redhat.com>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/gpu/drm/drm_edid.c | 13 +++++++++++++
include/drm/drm_crtc.h | 2 ++
2 files changed, 15 insertions(+)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index d0d3eae05a1a..1cb50268a224 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -3296,6 +3296,19 @@ int drm_add_modes_noedid(struct drm_connector *connector,
}
EXPORT_SYMBOL(drm_add_modes_noedid);

+void drm_set_preferred_mode(struct drm_connector *connector,
+ int hpref, int vpref)
+{
+ struct drm_display_mode *mode;
+
+ list_for_each_entry(mode, &connector->probed_modes, head) {
+ if (drm_mode_width(mode) == hpref &&
+ drm_mode_height(mode) == vpref)
+ mode->type |= DRM_MODE_TYPE_PREFERRED;
+ }
+}
+EXPORT_SYMBOL(drm_set_preferred_mode);
+
/**
* drm_hdmi_avi_infoframe_from_display_mode() - fill an HDMI AVI infoframe with
* data from a DRM display mode
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 24f499569a2f..ec5d737f93c5 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -1108,6 +1108,8 @@ extern struct drm_display_mode *drm_gtf_mode_complex(struct drm_device *dev,
int GTF_2C, int GTF_K, int GTF_2J);
extern int drm_add_modes_noedid(struct drm_connector *connector,
int hdisplay, int vdisplay);
+extern void drm_set_preferred_mode(struct drm_connector *connector,
+ int hpref, int vpref);

extern int drm_edid_header_is_valid(const u8 *raw_edid);
extern bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid);
--
1.9.2
Jiri Slaby
2014-04-18 09:21:50 UTC
Permalink
=46rom: Alex Deucher <***@amd.com>

3.12-stable review patch. If anyone has any objections, please let me =
know.

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

commit 3803c8e5b50946dd6bc18972d9190757d05648f0 upstream.

Now that we disable audio while setting up the audio
hw, we should be able to set this up without hangs.

Signed-off-by: Alex Deucher <***@amd.com>
Reviewed-by: Christian K=C3=B6nig <***@amd.com>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/gpu/drm/radeon/r600_hdmi.c | 3 ---
1 file changed, 3 deletions(-)

diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeo=
n/r600_hdmi.c
index 9ba0675d0682..d38b725563e4 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -329,9 +329,6 @@ static void dce3_2_afmt_write_speaker_allocation(st=
ruct drm_encoder *encoder)
u8 *sadb;
int sad_count;
=20
- /* XXX: setting this register causes hangs on some asics */
- return;
-
list_for_each_entry(connector, &encoder->dev->mode_config.connector_l=
ist, head) {
if (connector->encoder =3D=3D encoder)
radeon_connector =3D to_radeon_connector(connector);
--=20
1.9.2
Jiri Slaby
2014-04-18 09:21:52 UTC
Permalink
From: Gu Zheng <***@cn.fujitsu.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit 3a41c5dbe8bc396a7fb16ca8739e945bb003342e upstream.

Following commits:

50e244cc79 fb: rework locking to fix lock ordering on takeover
e93a9a8687 fb: Yet another band-aid for fixing lockdep mess
054430e773 fbcon: fix locking harder

reworked locking to fix related lock ordering on takeover, and introduced console_lock
into fbmem, but it seems that the new lock sequence(fb_info->lock ---> console_lock)
is against with the one in console_callback(console_lock ---> fb_info->lock), and leads to
a potential dead lock as following:

[ 601.079000] ======================================================
[ 601.079000] [ INFO: possible circular locking dependency detected ]
[ 601.079000] 3.11.0 #189 Not tainted
[ 601.079000] -------------------------------------------------------
[ 601.079000] kworker/0:3/619 is trying to acquire lock:
[ 601.079000] (&fb_info->lock){+.+.+.}, at: [<ffffffff81397566>] lock_fb_info+0x26/0x60
[ 601.079000]
but task is already holding lock:
[ 601.079000] (console_lock){+.+.+.}, at: [<ffffffff8141aae3>] console_callback+0x13/0x160
[ 601.079000]
which lock already depends on the new lock.

[ 601.079000]
the existing dependency chain (in reverse order) is:
[ 601.079000]
-> #1 (console_lock){+.+.+.}:
[ 601.079000] [<ffffffff810dc971>] lock_acquire+0xa1/0x140
[ 601.079000] [<ffffffff810c6267>] console_lock+0x77/0x80
[ 601.079000] [<ffffffff81399448>] register_framebuffer+0x1d8/0x320
[ 601.079000] [<ffffffff81cfb4c8>] efifb_probe+0x408/0x48f
[ 601.079000] [<ffffffff8144a963>] platform_drv_probe+0x43/0x80
[ 601.079000] [<ffffffff8144853b>] driver_probe_device+0x8b/0x390
[ 601.079000] [<ffffffff814488eb>] __driver_attach+0xab/0xb0
[ 601.079000] [<ffffffff814463bd>] bus_for_each_dev+0x5d/0xa0
[ 601.079000] [<ffffffff81447e6e>] driver_attach+0x1e/0x20
[ 601.079000] [<ffffffff81447a07>] bus_add_driver+0x117/0x290
[ 601.079000] [<ffffffff81448fea>] driver_register+0x7a/0x170
[ 601.079000] [<ffffffff8144a10a>] __platform_driver_register+0x4a/0x50
[ 601.079000] [<ffffffff8144a12d>] platform_driver_probe+0x1d/0xb0
[ 601.079000] [<ffffffff81cfb0a1>] efifb_init+0x273/0x292
[ 601.079000] [<ffffffff81002132>] do_one_initcall+0x102/0x1c0
[ 601.079000] [<ffffffff81cb80a6>] kernel_init_freeable+0x15d/0x1ef
[ 601.079000] [<ffffffff8166d2de>] kernel_init+0xe/0xf0
[ 601.079000] [<ffffffff816914ec>] ret_from_fork+0x7c/0xb0
[ 601.079000]
-> #0 (&fb_info->lock){+.+.+.}:
[ 601.079000] [<ffffffff810dc1d8>] __lock_acquire+0x1e18/0x1f10
[ 601.079000] [<ffffffff810dc971>] lock_acquire+0xa1/0x140
[ 601.079000] [<ffffffff816835ca>] mutex_lock_nested+0x7a/0x3b0
[ 601.079000] [<ffffffff81397566>] lock_fb_info+0x26/0x60
[ 601.079000] [<ffffffff813a4aeb>] fbcon_blank+0x29b/0x2e0
[ 601.079000] [<ffffffff81418658>] do_blank_screen+0x1d8/0x280
[ 601.079000] [<ffffffff8141ab34>] console_callback+0x64/0x160
[ 601.079000] [<ffffffff8108d855>] process_one_work+0x1f5/0x540
[ 601.079000] [<ffffffff8108e04c>] worker_thread+0x11c/0x370
[ 601.079000] [<ffffffff81095fbd>] kthread+0xed/0x100
[ 601.079000] [<ffffffff816914ec>] ret_from_fork+0x7c/0xb0
[ 601.079000]
other info that might help us debug this:

[ 601.079000] Possible unsafe locking scenario:

[ 601.079000] CPU0 CPU1
[ 601.079000] ---- ----
[ 601.079000] lock(console_lock);
[ 601.079000] lock(&fb_info->lock);
[ 601.079000] lock(console_lock);
[ 601.079000] lock(&fb_info->lock);
[ 601.079000]
*** DEADLOCK ***

so we reorder the lock sequence the same as it in console_callback() to
avoid this issue. And following Tomi's suggestion, fix these similar
issues all in fb subsystem.

Signed-off-by: Gu Zheng <***@cn.fujitsu.com>
Signed-off-by: Tomi Valkeinen <***@ti.com>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/video/fbmem.c | 50 +++++++++++++++++++++++++---------------
drivers/video/fbsysfs.c | 19 ++++++++++-----
drivers/video/sh_mobile_lcdcfb.c | 10 ++++----
3 files changed, 51 insertions(+), 28 deletions(-)

diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 8659eb160b4d..cde461932760 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1108,14 +1108,16 @@ static long do_fb_ioctl(struct fb_info *info, unsigned int cmd,
case FBIOPUT_VSCREENINFO:
if (copy_from_user(&var, argp, sizeof(var)))
return -EFAULT;
- if (!lock_fb_info(info))
- return -ENODEV;
console_lock();
+ if (!lock_fb_info(info)) {
+ console_unlock();
+ return -ENODEV;
+ }
info->flags |= FBINFO_MISC_USEREVENT;
ret = fb_set_var(info, &var);
info->flags &= ~FBINFO_MISC_USEREVENT;
- console_unlock();
unlock_fb_info(info);
+ console_unlock();
if (!ret && copy_to_user(argp, &var, sizeof(var)))
ret = -EFAULT;
break;
@@ -1144,12 +1146,14 @@ static long do_fb_ioctl(struct fb_info *info, unsigned int cmd,
case FBIOPAN_DISPLAY:
if (copy_from_user(&var, argp, sizeof(var)))
return -EFAULT;
- if (!lock_fb_info(info))
- return -ENODEV;
console_lock();
+ if (!lock_fb_info(info)) {
+ console_unlock();
+ return -ENODEV;
+ }
ret = fb_pan_display(info, &var);
- console_unlock();
unlock_fb_info(info);
+ console_unlock();
if (ret == 0 && copy_to_user(argp, &var, sizeof(var)))
return -EFAULT;
break;
@@ -1184,23 +1188,27 @@ static long do_fb_ioctl(struct fb_info *info, unsigned int cmd,
break;
}
event.data = &con2fb;
- if (!lock_fb_info(info))
- return -ENODEV;
console_lock();
+ if (!lock_fb_info(info)) {
+ console_unlock();
+ return -ENODEV;
+ }
event.info = info;
ret = fb_notifier_call_chain(FB_EVENT_SET_CONSOLE_MAP, &event);
- console_unlock();
unlock_fb_info(info);
+ console_unlock();
break;
case FBIOBLANK:
- if (!lock_fb_info(info))
- return -ENODEV;
console_lock();
+ if (!lock_fb_info(info)) {
+ console_unlock();
+ return -ENODEV;
+ }
info->flags |= FBINFO_MISC_USEREVENT;
ret = fb_blank(info, arg);
info->flags &= ~FBINFO_MISC_USEREVENT;
- console_unlock();
unlock_fb_info(info);
+ console_unlock();
break;
default:
if (!lock_fb_info(info))
@@ -1660,12 +1668,15 @@ static int do_register_framebuffer(struct fb_info *fb_info)
registered_fb[i] = fb_info;

event.info = fb_info;
- if (!lock_fb_info(fb_info))
- return -ENODEV;
console_lock();
+ if (!lock_fb_info(fb_info)) {
+ console_unlock();
+ return -ENODEV;
+ }
+
fb_notifier_call_chain(FB_EVENT_FB_REGISTERED, &event);
- console_unlock();
unlock_fb_info(fb_info);
+ console_unlock();
return 0;
}

@@ -1678,13 +1689,16 @@ static int do_unregister_framebuffer(struct fb_info *fb_info)
if (i < 0 || i >= FB_MAX || registered_fb[i] != fb_info)
return -EINVAL;

- if (!lock_fb_info(fb_info))
- return -ENODEV;
console_lock();
+ if (!lock_fb_info(fb_info)) {
+ console_unlock();
+ return -ENODEV;
+ }
+
event.info = fb_info;
ret = fb_notifier_call_chain(FB_EVENT_FB_UNBIND, &event);
- console_unlock();
unlock_fb_info(fb_info);
+ console_unlock();

if (ret)
return -EINVAL;
diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbsysfs.c
index ef476b02fbe5..53444ac19fe0 100644
--- a/drivers/video/fbsysfs.c
+++ b/drivers/video/fbsysfs.c
@@ -177,9 +177,12 @@ static ssize_t store_modes(struct device *device,
if (i * sizeof(struct fb_videomode) != count)
return -EINVAL;

- if (!lock_fb_info(fb_info))
- return -ENODEV;
console_lock();
+ if (!lock_fb_info(fb_info)) {
+ console_unlock();
+ return -ENODEV;
+ }
+
list_splice(&fb_info->modelist, &old_list);
fb_videomode_to_modelist((const struct fb_videomode *)buf, i,
&fb_info->modelist);
@@ -189,8 +192,8 @@ static ssize_t store_modes(struct device *device,
} else
fb_destroy_modelist(&old_list);

- console_unlock();
unlock_fb_info(fb_info);
+ console_unlock();

return 0;
}
@@ -404,12 +407,16 @@ static ssize_t store_fbstate(struct device *device,

state = simple_strtoul(buf, &last, 0);

- if (!lock_fb_info(fb_info))
- return -ENODEV;
console_lock();
+ if (!lock_fb_info(fb_info)) {
+ console_unlock();
+ return -ENODEV;
+ }
+
fb_set_suspend(fb_info, (int)state);
- console_unlock();
+
unlock_fb_info(fb_info);
+ console_unlock();

return count;
}
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 0264704a52be..45d031233253 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -574,8 +574,9 @@ static int sh_mobile_lcdc_display_notify(struct sh_mobile_lcdc_chan *ch,
switch (event) {
case SH_MOBILE_LCDC_EVENT_DISPLAY_CONNECT:
/* HDMI plug in */
+ console_lock();
if (lock_fb_info(info)) {
- console_lock();
+

ch->display.width = monspec->max_x * 10;
ch->display.height = monspec->max_y * 10;
@@ -594,19 +595,20 @@ static int sh_mobile_lcdc_display_notify(struct sh_mobile_lcdc_chan *ch,
fb_set_suspend(info, 0);
}

- console_unlock();
+
unlock_fb_info(info);
}
+ console_unlock();
break;

case SH_MOBILE_LCDC_EVENT_DISPLAY_DISCONNECT:
/* HDMI disconnect */
+ console_lock();
if (lock_fb_info(info)) {
- console_lock();
fb_set_suspend(info, 1);
- console_unlock();
unlock_fb_info(info);
}
+ console_unlock();
break;

case SH_MOBILE_LCDC_EVENT_DISPLAY_MODE:
--
1.9.2
Jiri Slaby
2014-04-18 09:22:44 UTC
Permalink
From: Vineet Gupta <***@synopsys.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit 61fb4bfc010b0d2940f7fd87acbce6a0f03217cb upstream.

Despite the switch to right UART driver (prev patch), serial console
still doesn't work due to missing CONFIG_SERIAL_OF_PLATFORM

Also fix the default cmdline in DT to not refer to out-of-tree
ARC framebuffer driver for console.

Signed-off-by: Vineet Gupta <***@synopsys.com>
Cc: Francois Bedard <***@synopsys.com>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
arch/arc/boot/dts/nsimosci.dts | 5 ++++-
arch/arc/configs/nsimosci_defconfig | 1 +
2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arc/boot/dts/nsimosci.dts b/arch/arc/boot/dts/nsimosci.dts
index 8bd238c34c7d..4f31b2eb5cdf 100644
--- a/arch/arc/boot/dts/nsimosci.dts
+++ b/arch/arc/boot/dts/nsimosci.dts
@@ -17,7 +17,10 @@
interrupt-parent = <&intc>;

chosen {
- bootargs = "console=tty0 consoleblank=0";
+ /* this is for console on PGU */
+ /* bootargs = "console=tty0 consoleblank=0"; */
+ /* this is for console on serial */
+ bootargs = "earlycon=uart8250,mmio32,0xc0000000,115200n8 console=ttyS0,115200n8 consoleblank=0 debug";
};

aliases {
diff --git a/arch/arc/configs/nsimosci_defconfig b/arch/arc/configs/nsimosci_defconfig
index 451af30914f6..c01ba35a4eff 100644
--- a/arch/arc/configs/nsimosci_defconfig
+++ b/arch/arc/configs/nsimosci_defconfig
@@ -54,6 +54,7 @@ CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
# CONFIG_HW_RANDOM is not set
--
1.9.2
Jiri Slaby
2014-04-18 09:22:41 UTC
Permalink
From: Dan Carpenter <***@oracle.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit 7563487cbf865284dcd35e9ef5a95380da046737 ]

There are three buffer overflows addressed in this patch.

1) In isdnloop_fake_err() we add an 'E' to a 60 character string and
then copy it into a 60 character buffer. I have made the destination
buffer 64 characters and I'm changed the sprintf() to a snprintf().

2) In isdnloop_parse_cmd(), p points to a 6 characters into a 60
character buffer so we have 54 characters. The ->eazlist[] is 11
characters long. I have modified the code to return if the source
buffer is too long.

3) In isdnloop_command() the cbuf[] array was 60 characters long but the
max length of the string then can be up to 79 characters. I made the
cbuf array 80 characters long and changed the sprintf() to snprintf().
I also removed the temporary "dial" buffer and changed it to use "p"
directly.

Unfortunately, we pass the "cbuf" string from isdnloop_command() to
isdnloop_writecmd() which truncates anything over 60 characters to make
it fit in card->omsg[]. (It can accept values up to 255 characters so
long as there is a '\n' character every 60 characters). For now I have
just fixed the memory corruption bug and left the other problems in this
driver alone.

Signed-off-by: Dan Carpenter <***@oracle.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/isdn/isdnloop/isdnloop.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/isdn/isdnloop/isdnloop.c b/drivers/isdn/isdnloop/isdnloop.c
index e1f8748ff25d..5a4da94aefb0 100644
--- a/drivers/isdn/isdnloop/isdnloop.c
+++ b/drivers/isdn/isdnloop/isdnloop.c
@@ -518,9 +518,9 @@ static isdnloop_stat isdnloop_cmd_table[] =
static void
isdnloop_fake_err(isdnloop_card *card)
{
- char buf[60];
+ char buf[64];

- sprintf(buf, "E%s", card->omsg);
+ snprintf(buf, sizeof(buf), "E%s", card->omsg);
isdnloop_fake(card, buf, -1);
isdnloop_fake(card, "NAK", -1);
}
@@ -903,6 +903,8 @@ isdnloop_parse_cmd(isdnloop_card *card)
case 7:
/* 0x;EAZ */
p += 3;
+ if (strlen(p) >= sizeof(card->eazlist[0]))
+ break;
strcpy(card->eazlist[ch - 1], p);
break;
case 8:
@@ -1133,7 +1135,7 @@ isdnloop_command(isdn_ctrl *c, isdnloop_card *card)
{
ulong a;
int i;
- char cbuf[60];
+ char cbuf[80];
isdn_ctrl cmd;
isdnloop_cdef cdef;

@@ -1198,7 +1200,6 @@ isdnloop_command(isdn_ctrl *c, isdnloop_card *card)
break;
if ((c->arg & 255) < ISDNLOOP_BCH) {
char *p;
- char dial[50];
char dcode[4];

a = c->arg;
@@ -1210,10 +1211,10 @@ isdnloop_command(isdn_ctrl *c, isdnloop_card *card)
} else
/* Normal Dial */
strcpy(dcode, "CAL");
- strcpy(dial, p);
- sprintf(cbuf, "%02d;D%s_R%s,%02d,%02d,%s\n", (int) (a + 1),
- dcode, dial, c->parm.setup.si1,
- c->parm.setup.si2, c->parm.setup.eazmsn);
+ snprintf(cbuf, sizeof(cbuf),
+ "%02d;D%s_R%s,%02d,%02d,%s\n", (int) (a + 1),
+ dcode, p, c->parm.setup.si1,
+ c->parm.setup.si2, c->parm.setup.eazmsn);
i = isdnloop_writecmd(cbuf, strlen(cbuf), 0, card);
}
break;
--
1.9.2
Jiri Slaby
2014-04-18 09:22:43 UTC
Permalink
From: Mischa Jonker <***@synopsys.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit 6eda477b3c54b8236868c8784e5e042ff14244f0 upstream.

The Synopsys APB DW UART has a couple of special features that are not
in the System C model. In 3.8, the 8250_dw driver didn't really use these
features, but from 3.9 onwards, the 8250_dw driver has become incompatible
with our model.

Signed-off-by: Mischa Jonker <***@synopsys.com>
Signed-off-by: Vineet Gupta <***@synopsys.com>
Cc: Francois Bedard <***@synopsys.com>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
arch/arc/boot/dts/nsimosci.dts | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/arc/boot/dts/nsimosci.dts b/arch/arc/boot/dts/nsimosci.dts
index ea16d782af58..8bd238c34c7d 100644
--- a/arch/arc/boot/dts/nsimosci.dts
+++ b/arch/arc/boot/dts/nsimosci.dts
@@ -11,7 +11,7 @@

/ {
compatible = "snps,nsimosci";
- clock-frequency = <80000000>; /* 80 MHZ */
+ clock-frequency = <20000000>; /* 20 MHZ */
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
@@ -44,15 +44,14 @@
};

uart0: ***@c0000000 {
- compatible = "snps,dw-apb-uart";
+ compatible = "ns8250";
reg = <0xc0000000 0x2000>;
interrupts = <11>;
- #clock-frequency = <80000000>;
clock-frequency = <3686400>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
- status = "okay";
+ no-loopback-test = <1>;
};

pgu0: ***@c9000000 {
--
1.9.2
Jiri Slaby
2014-04-18 09:22:42 UTC
Permalink
From: Sasha Levin <***@oracle.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit bf39b4247b8799935ea91d90db250ab608a58e50 ]

Binding might result in a NULL device which is later dereferenced
without checking.

Signed-off-by: Sasha Levin <***@oracle.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/rds/iw.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/rds/iw.c b/net/rds/iw.c
index 7826d46baa70..589935661d66 100644
--- a/net/rds/iw.c
+++ b/net/rds/iw.c
@@ -239,7 +239,8 @@ static int rds_iw_laddr_check(__be32 addr)
ret = rdma_bind_addr(cm_id, (struct sockaddr *)&sin);
/* due to this, we will claim to support IB devices unless we
check node_type. */
- if (ret || cm_id->device->node_type != RDMA_NODE_RNIC)
+ if (ret || !cm_id->device ||
+ cm_id->device->node_type != RDMA_NODE_RNIC)
ret = -EADDRNOTAVAIL;

rdsdebug("addr %pI4 ret %d node type %d\n",
--
1.9.2
Jiri Slaby
2014-04-18 09:22:39 UTC
Permalink
From: Mike Rapoport <***@ravellosystems.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit 5933a7bbb5de66482ea8aa874a7ebaf8e67603c4 ]

If the vxlan interface is created without explicit group definition,
there are corner cases which may cause kernel panic.

For instance, in the following scenario:

node A:
$ ip link add dev vxlan42 address 2c:c2:60:00:10:20 type vxlan id 42
$ ip addr add dev vxlan42 10.0.0.1/24
$ ip link set up dev vxlan42
$ arp -i vxlan42 -s 10.0.0.2 2c:c2:60:00:01:02
$ bridge fdb add dev vxlan42 to 2c:c2:60:00:01:02 dst <IPv4 address>
$ ping 10.0.0.2

node B:
$ ip link add dev vxlan42 address 2c:c2:60:00:01:02 type vxlan id 42
$ ip addr add dev vxlan42 10.0.0.2/24
$ ip link set up dev vxlan42
$ arp -i vxlan42 -s 10.0.0.1 2c:c2:60:00:10:20

node B crashes:

vxlan42: 2c:c2:60:00:10:20 migrated from 4011:eca4:c0a8:6466:c0a8:6415:8e09:2118 to (invalid address)
vxlan42: 2c:c2:60:00:10:20 migrated from 4011:eca4:c0a8:6466:c0a8:6415:8e09:2118 to (invalid address)
BUG: unable to handle kernel NULL pointer dereference at 0000000000000046
IP: [<ffffffff8143c459>] ip6_route_output+0x58/0x82
PGD 7bd89067 PUD 7bd4e067 PMD 0
Oops: 0000 [#1] SMP
Modules linked in:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.14.0-rc8-hvx-xen-00019-g97a5221-dirty #154
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
task: ffff88007c774f50 ti: ffff88007c79c000 task.ti: ffff88007c79c000
RIP: 0010:[<ffffffff8143c459>] [<ffffffff8143c459>] ip6_route_output+0x58/0x82
RSP: 0018:ffff88007fd03668 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffff8186a000 RCX: 0000000000000040
RDX: 0000000000000000 RSI: ffff88007b0e4a80 RDI: ffff88007fd03754
RBP: ffff88007fd03688 R08: ffff88007b0e4a80 R09: 0000000000000000
R10: 0200000a0100000a R11: 0001002200000000 R12: ffff88007fd03740
R13: ffff88007b0e4a80 R14: ffff88007b0e4a80 R15: ffff88007bba0c50
FS: 0000000000000000(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000046 CR3: 000000007bb60000 CR4: 00000000000006e0
Stack:
0000000000000000 ffff88007fd037a0 ffffffff8186a000 ffff88007fd03740
ffff88007fd036c8 ffffffff814320bb 0000000000006e49 ffff88007b8b7360
ffff88007bdbf200 ffff88007bcbc000 ffff88007b8b7000 ffff88007b8b7360
Call Trace:
<IRQ>
[<ffffffff814320bb>] ip6_dst_lookup_tail+0x2d/0xa4
[<ffffffff814322a5>] ip6_dst_lookup+0x10/0x12
[<ffffffff81323b4e>] vxlan_xmit_one+0x32a/0x68c
[<ffffffff814a325a>] ? _raw_spin_unlock_irqrestore+0x12/0x14
[<ffffffff8104c551>] ? lock_timer_base.isra.23+0x26/0x4b
[<ffffffff8132451a>] vxlan_xmit+0x66a/0x6a8
[<ffffffff8141a365>] ? ipt_do_table+0x35f/0x37e
[<ffffffff81204ba2>] ? selinux_ip_postroute+0x41/0x26e
[<ffffffff8139d0c1>] dev_hard_start_xmit+0x2ce/0x3ce
[<ffffffff8139d491>] __dev_queue_xmit+0x2d0/0x392
[<ffffffff813b380f>] ? eth_header+0x28/0xb5
[<ffffffff8139d569>] dev_queue_xmit+0xb/0xd
[<ffffffff813a5aa6>] neigh_resolve_output+0x134/0x152
[<ffffffff813db741>] ip_finish_output2+0x236/0x299
[<ffffffff813dc074>] ip_finish_output+0x98/0x9d
[<ffffffff813dc749>] ip_output+0x62/0x67
[<ffffffff813da9f2>] dst_output+0xf/0x11
[<ffffffff813dc11c>] ip_local_out+0x1b/0x1f
[<ffffffff813dcf1b>] ip_send_skb+0x11/0x37
[<ffffffff813dcf70>] ip_push_pending_frames+0x2f/0x33
[<ffffffff813ff732>] icmp_push_reply+0x106/0x115
[<ffffffff813ff9e4>] icmp_reply+0x142/0x164
[<ffffffff813ffb3b>] icmp_echo.part.16+0x46/0x48
[<ffffffff813c1d30>] ? nf_iterate+0x43/0x80
[<ffffffff813d8037>] ? xfrm4_policy_check.constprop.11+0x52/0x52
[<ffffffff813ffb62>] icmp_echo+0x25/0x27
[<ffffffff814005f7>] icmp_rcv+0x1d2/0x20a
[<ffffffff813d8037>] ? xfrm4_policy_check.constprop.11+0x52/0x52
[<ffffffff813d810d>] ip_local_deliver_finish+0xd6/0x14f
[<ffffffff813d8037>] ? xfrm4_policy_check.constprop.11+0x52/0x52
[<ffffffff813d7fde>] NF_HOOK.constprop.10+0x4c/0x53
[<ffffffff813d82bf>] ip_local_deliver+0x4a/0x4f
[<ffffffff813d7f7b>] ip_rcv_finish+0x253/0x26a
[<ffffffff813d7d28>] ? inet_add_protocol+0x3e/0x3e
[<ffffffff813d7fde>] NF_HOOK.constprop.10+0x4c/0x53
[<ffffffff813d856a>] ip_rcv+0x2a6/0x2ec
[<ffffffff8139a9a0>] __netif_receive_skb_core+0x43e/0x478
[<ffffffff812a346f>] ? virtqueue_poll+0x16/0x27
[<ffffffff8139aa2f>] __netif_receive_skb+0x55/0x5a
[<ffffffff8139aaaa>] process_backlog+0x76/0x12f
[<ffffffff8139add8>] net_rx_action+0xa2/0x1ab
[<ffffffff81047847>] __do_softirq+0xca/0x1d1
[<ffffffff81047ace>] irq_exit+0x3e/0x85
[<ffffffff8100b98b>] do_IRQ+0xa9/0xc4
[<ffffffff814a37ad>] common_interrupt+0x6d/0x6d
<EOI>
[<ffffffff810378db>] ? native_safe_halt+0x6/0x8
[<ffffffff810110c7>] default_idle+0x9/0xd
[<ffffffff81011694>] arch_cpu_idle+0x13/0x1c
[<ffffffff8107480d>] cpu_startup_entry+0xbc/0x137
[<ffffffff8102e741>] start_secondary+0x1a0/0x1a5
Code: 24 14 e8 f1 e5 01 00 31 d2 a8 32 0f 95 c2 49 8b 44 24 2c 49 0b 44 24 24 74 05 83 ca 04 eb 1c 4d 85 ed 74 17 49 8b 85 a8 02 00 00 <66> 8b 40 46 66 c1 e8 07 83 e0 07 c1 e0 03 09 c2 4c 89 e6 48 89
RIP [<ffffffff8143c459>] ip6_route_output+0x58/0x82
RSP <ffff88007fd03668>
CR2: 0000000000000046
---[ end trace 4612329caab37efd ]---

When vxlan interface is created without explicit group definition, the
default_dst protocol family is initialiazed to AF_UNSPEC and the driver
assumes IPv4 configuration. On the other side, the default_dst protocol
family is used to differentiate between IPv4 and IPv6 cases and, since,
AF_UNSPEC != AF_INET, the processing takes the IPv6 path.

Making the IPv4 assumption explicit by settting default_dst protocol
family to AF_INET4 and preventing mixing of IPv4 and IPv6 addresses in
snooped fdb entries fixes the corner case crashes.

Signed-off-by: Mike Rapoport <***@ravellosystems.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/net/vxlan.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 6c0d1c103286..4ecdf3c22bc6 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -781,6 +781,9 @@ static int vxlan_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
if (err)
return err;

+ if (vxlan->default_dst.remote_ip.sa.sa_family != ip.sa.sa_family)
+ return -EAFNOSUPPORT;
+
spin_lock_bh(&vxlan->hash_lock);
err = vxlan_fdb_create(vxlan, addr, &ip, ndm->ndm_state, flags,
port, vni, ifindex, ndm->ndm_flags);
@@ -2485,9 +2488,10 @@ static int vxlan_newlink(struct net *net, struct net_device *dev,
vni = nla_get_u32(data[IFLA_VXLAN_ID]);
dst->remote_vni = vni;

+ /* Unless IPv6 is explicitly requested, assume IPv4 */
+ dst->remote_ip.sa.sa_family = AF_INET;
if (data[IFLA_VXLAN_GROUP]) {
dst->remote_ip.sin.sin_addr.s_addr = nla_get_be32(data[IFLA_VXLAN_GROUP]);
- dst->remote_ip.sa.sa_family = AF_INET;
} else if (data[IFLA_VXLAN_GROUP6]) {
if (!IS_ENABLED(CONFIG_IPV6))
return -EPFNOSUPPORT;
--
1.9.2
Jiri Slaby
2014-04-18 09:22:40 UTC
Permalink
From: YOSHIFUJI Hideaki <***@linux-ipv6.org>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit 77bc6bed7121936bb2e019a8c336075f4c8eef62 ]

Return -EINVAL unless all of user-given strings are correctly
NUL-terminated.

Signed-off-by: YOSHIFUJI Hideaki <***@linux-ipv6.org>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/isdn/isdnloop/isdnloop.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/isdn/isdnloop/isdnloop.c b/drivers/isdn/isdnloop/isdnloop.c
index 02125e6a9109..e1f8748ff25d 100644
--- a/drivers/isdn/isdnloop/isdnloop.c
+++ b/drivers/isdn/isdnloop/isdnloop.c
@@ -1070,6 +1070,12 @@ isdnloop_start(isdnloop_card *card, isdnloop_sdef *sdefp)
return -EBUSY;
if (copy_from_user((char *) &sdef, (char *) sdefp, sizeof(sdef)))
return -EFAULT;
+
+ for (i = 0; i < 3; i++) {
+ if (!memchr(sdef.num[i], 0, sizeof(sdef.num[i])))
+ return -EINVAL;
+ }
+
spin_lock_irqsave(&card->isdnloop_lock, flags);
switch (sdef.ptype) {
case ISDN_PTYPE_EURO:
--
1.9.2
Jiri Slaby
2014-04-18 09:22:38 UTC
Permalink
=46rom: Wei Liu <***@citrix.com>

3.12-stable review patch. If anyone has any objections, please let me =
know.

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

[ Upstream commit e9d8b2c2968499c1f96563e6522c56958d5a1d0d ]

When netback discovers frontend is sending malformed packet it will
disables the interface which serves that frontend.

However disabling a network interface involving taking a mutex which
cannot be done in softirq context, so we need to defer this process to
kthread context.

This patch does the following:
1. introduce a flag to indicate the interface is disabled.
2. check that flag in TX path, don't do any work if it's true.
3. check that flag in RX path, turn off that interface if it's true.

The reason to disable it in RX path is because RX uses kthread. After
this change the behavior of netback is still consistent -- it won't do
any TX work for a rogue frontend, and the interface will be eventually
turned off.

Also change a "continue" to "break" after xenvif_fatal_tx_err, as it
doesn't make sense to continue processing packets if frontend is rogue.

This is a fix for XSA-90.

Reported-by: T=C3=B6r=C3=B6k Edwin <***@etorok.net>
Signed-off-by: Wei Liu <***@citrix.com>
Cc: Ian Campbell <***@citrix.com>
Reviewed-by: David Vrabel <***@citrix.com>
Acked-by: Ian Campbell <***@citrix.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/net/xen-netback/common.h | 5 +++++
drivers/net/xen-netback/interface.c | 11 +++++++++++
drivers/net/xen-netback/netback.c | 16 ++++++++++++++--
3 files changed, 30 insertions(+), 2 deletions(-)

diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback=
/common.h
index 400fea1de080..a7501cb9b53b 100644
--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -102,6 +102,11 @@ struct xenvif {
domid_t domid;
unsigned int handle;
=20
+ /* Is this interface disabled? True when backend discovers
+ * frontend is rogue.
+ */
+ bool disabled;
+
/* Use NAPI for guest TX */
struct napi_struct napi;
/* When feature-split-event-channels =3D 0, tx_irq =3D rx_irq. */
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netb=
ack/interface.c
index 459935a6bfae..adfe46068581 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -66,6 +66,15 @@ static int xenvif_poll(struct napi_struct *napi, int=
budget)
struct xenvif *vif =3D container_of(napi, struct xenvif, napi);
int work_done;
=20
+ /* This vif is rogue, we pretend we've there is nothing to do
+ * for this vif to deschedule it from NAPI. But this interface
+ * will be turned off in thread context later.
+ */
+ if (unlikely(vif->disabled)) {
+ napi_complete(napi);
+ return 0;
+ }
+
work_done =3D xenvif_tx_action(vif, budget);
=20
if (work_done < budget) {
@@ -309,6 +318,8 @@ struct xenvif *xenvif_alloc(struct device *parent, =
domid_t domid,
vif->csum =3D 1;
vif->dev =3D dev;
=20
+ vif->disabled =3D false;
+
vif->credit_bytes =3D vif->remaining_credit =3D ~0UL;
vif->credit_usec =3D 0UL;
init_timer(&vif->credit_timeout);
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netbac=
k/netback.c
index 74b09260457a..a1186533cee8 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -731,7 +731,8 @@ static void xenvif_tx_err(struct xenvif *vif,
static void xenvif_fatal_tx_err(struct xenvif *vif)
{
netdev_err(vif->dev, "fatal error; disabling device\n");
- xenvif_carrier_off(vif);
+ vif->disabled =3D true;
+ xenvif_kick_thread(vif);
}
=20
static int xenvif_count_requests(struct xenvif *vif,
@@ -1242,7 +1243,7 @@ static unsigned xenvif_tx_build_gops(struct xenvi=
f *vif)
vif->tx.sring->req_prod, vif->tx.req_cons,
XEN_NETIF_TX_RING_SIZE);
xenvif_fatal_tx_err(vif);
- continue;
+ break;
}
=20
RING_FINAL_CHECK_FOR_REQUESTS(&vif->tx, work_to_do);
@@ -1642,7 +1643,18 @@ int xenvif_kthread(void *data)
while (!kthread_should_stop()) {
wait_event_interruptible(vif->wq,
rx_work_todo(vif) ||
+ vif->disabled ||
kthread_should_stop());
+
+ /* This frontend is found to be rogue, disable it in
+ * kthread context. Currently this is only set when
+ * netback finds out frontend sends malformed packet,
+ * but we cannot disable the interface in softirq
+ * context so we defer it here.
+ */
+ if (unlikely(vif->disabled && netif_carrier_ok(vif->dev)))
+ xenvif_carrier_off(vif);
+
if (kthread_should_stop())
break;
=20
--=20
1.9.2
Jiri Slaby
2014-04-18 09:22:37 UTC
Permalink
From: Pablo Neira <***@netfilter.org>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit 8b7b932434f5eee495b91a2804f5b64ebb2bc835 ]

nla_strcmp compares the string length plus one, so it's implicitly
including the nul-termination in the comparison.

int nla_strcmp(const struct nlattr *nla, const char *str)
{
int len = strlen(str) + 1;
...
d = memcmp(nla_data(nla), str, len);

However, if NLA_STRING is used, userspace can send us a string without
the nul-termination. This is a problem since the string
comparison will not match as the last byte may be not the
nul-termination.

Fix this by skipping the comparison of the nul-termination if the
attribute data is nul-terminated. Suggested by Thomas Graf.

Cc: Florian Westphal <***@strlen.de>
Cc: Thomas Graf <***@suug.ch>
Signed-off-by: Pablo Neira Ayuso <***@netfilter.org>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
lib/nlattr.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/lib/nlattr.c b/lib/nlattr.c
index 18eca7809b08..fc6754720ced 100644
--- a/lib/nlattr.c
+++ b/lib/nlattr.c
@@ -303,9 +303,15 @@ int nla_memcmp(const struct nlattr *nla, const void *data,
*/
int nla_strcmp(const struct nlattr *nla, const char *str)
{
- int len = strlen(str) + 1;
- int d = nla_len(nla) - len;
+ int len = strlen(str);
+ char *buf = nla_data(nla);
+ int attrlen = nla_len(nla);
+ int d;

+ if (attrlen > 0 && buf[attrlen - 1] == '\0')
+ attrlen--;
+
+ d = attrlen - len;
if (d == 0)
d = memcmp(nla_data(nla), str, len);
--
1.9.2
Jiri Slaby
2014-04-18 09:22:35 UTC
Permalink
From: Paul Durrant <***@citrix.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit 0576eddf24df716d8570ef8ca11452a9f98eaab2 ]

This patch removes a test in start_new_rx_buffer() that checks whether
a copy operation is less than MAX_BUFFER_OFFSET in length, since
MAX_BUFFER_OFFSET is defined to be PAGE_SIZE and the only caller of
start_new_rx_buffer() already limits copy operations to PAGE_SIZE or less.

Signed-off-by: Paul Durrant <***@citrix.com>
Cc: Ian Campbell <***@citrix.com>
Cc: Wei Liu <***@citrix.com>
Cc: Sander Eikelenboom <***@eikelenboom.it>
Reported-By: Sander Eikelenboom <***@eikelenboom.it>
Tested-By: Sander Eikelenboom <***@eikelenboom.it>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/net/xen-netback/netback.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index 625585034ef4..74b09260457a 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -206,8 +206,8 @@ static bool start_new_rx_buffer(int offset, unsigned long size, int head)
* into multiple copies tend to give large frags their
* own buffers as before.
*/
- if ((offset + size > MAX_BUFFER_OFFSET) &&
- (size <= MAX_BUFFER_OFFSET) && offset && !head)
+ BUG_ON(size > MAX_BUFFER_OFFSET);
+ if ((offset + size > MAX_BUFFER_OFFSET) && offset && !head)
return true;

return false;
--
1.9.2
Jiri Slaby
2014-04-18 09:22:45 UTC
Permalink
From: Ard Biesheuvel <***@linaro.org>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit 8ceee72808d1ae3fb191284afc2257a2be964725 upstream.

The GHASH setkey() function uses SSE registers but fails to call
kernel_fpu_begin()/kernel_fpu_end(). Instead of adding these calls, and
then having to deal with the restriction that they cannot be called from
interrupt context, move the setkey() implementation to the C domain.

Note that setkey() does not use any particular SSE features and is not
expected to become a performance bottleneck.

Signed-off-by: Ard Biesheuvel <***@linaro.org>
Acked-by: H. Peter Anvin <***@linux.intel.com>
Fixes: 0e1227d356e9b (crypto: ghash - Add PCLMULQDQ accelerated implementation)
Signed-off-by: Herbert Xu <***@gondor.apana.org.au>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
arch/x86/crypto/ghash-clmulni-intel_asm.S | 29 -----------------------------
arch/x86/crypto/ghash-clmulni-intel_glue.c | 14 +++++++++++---
2 files changed, 11 insertions(+), 32 deletions(-)

diff --git a/arch/x86/crypto/ghash-clmulni-intel_asm.S b/arch/x86/crypto/ghash-clmulni-intel_asm.S
index 586f41aac361..185fad49d86f 100644
--- a/arch/x86/crypto/ghash-clmulni-intel_asm.S
+++ b/arch/x86/crypto/ghash-clmulni-intel_asm.S
@@ -24,10 +24,6 @@
.align 16
.Lbswap_mask:
.octa 0x000102030405060708090a0b0c0d0e0f
-.Lpoly:
- .octa 0xc2000000000000000000000000000001
-.Ltwo_one:
- .octa 0x00000001000000000000000000000001

#define DATA %xmm0
#define SHASH %xmm1
@@ -134,28 +130,3 @@ ENTRY(clmul_ghash_update)
.Lupdate_just_ret:
ret
ENDPROC(clmul_ghash_update)
-
-/*
- * void clmul_ghash_setkey(be128 *shash, const u8 *key);
- *
- * Calculate hash_key << 1 mod poly
- */
-ENTRY(clmul_ghash_setkey)
- movaps .Lbswap_mask, BSWAP
- movups (%rsi), %xmm0
- PSHUFB_XMM BSWAP %xmm0
- movaps %xmm0, %xmm1
- psllq $1, %xmm0
- psrlq $63, %xmm1
- movaps %xmm1, %xmm2
- pslldq $8, %xmm1
- psrldq $8, %xmm2
- por %xmm1, %xmm0
- # reduction
- pshufd $0b00100100, %xmm2, %xmm1
- pcmpeqd .Ltwo_one, %xmm1
- pand .Lpoly, %xmm1
- pxor %xmm1, %xmm0
- movups %xmm0, (%rdi)
- ret
-ENDPROC(clmul_ghash_setkey)
diff --git a/arch/x86/crypto/ghash-clmulni-intel_glue.c b/arch/x86/crypto/ghash-clmulni-intel_glue.c
index 6759dd1135be..d785cf2c529c 100644
--- a/arch/x86/crypto/ghash-clmulni-intel_glue.c
+++ b/arch/x86/crypto/ghash-clmulni-intel_glue.c
@@ -30,8 +30,6 @@ void clmul_ghash_mul(char *dst, const be128 *shash);
void clmul_ghash_update(char *dst, const char *src, unsigned int srclen,
const be128 *shash);

-void clmul_ghash_setkey(be128 *shash, const u8 *key);
-
struct ghash_async_ctx {
struct cryptd_ahash *cryptd_tfm;
};
@@ -58,13 +56,23 @@ static int ghash_setkey(struct crypto_shash *tfm,
const u8 *key, unsigned int keylen)
{
struct ghash_ctx *ctx = crypto_shash_ctx(tfm);
+ be128 *x = (be128 *)key;
+ u64 a, b;

if (keylen != GHASH_BLOCK_SIZE) {
crypto_shash_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
return -EINVAL;
}

- clmul_ghash_setkey(&ctx->shash, key);
+ /* perform multiplication by 'x' in GF(2^128) */
+ a = be64_to_cpu(x->a);
+ b = be64_to_cpu(x->b);
+
+ ctx->shash.a = (__be64)((b << 1) | (a >> 63));
+ ctx->shash.b = (__be64)((a << 1) | (b >> 63));
+
+ if (a >> 63)
+ ctx->shash.b ^= cpu_to_be64(0xc2);

return 0;
}
--
1.9.2
Jiri Slaby
2014-04-18 09:22:36 UTC
Permalink
From: Hannes Frederic Sowa <***@stressinduktion.org>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit 43a43b6040165f7b40b5b489fe61a4cb7f8c4980 ]

After commit c15b1ccadb323ea ("ipv6: move DAD and addrconf_verify
processing to workqueue") some counters are now updated in process context
and thus need to disable bh before doing so, otherwise deadlocks can
happen on 32-bit archs. Fabio Estevam noticed this while while mounting
a NFS volume on an ARM board.

As a compensation for missing this I looked after the other *_STATS_BH
and found three other calls which need updating:

1) icmp6_send: ip6_fragment -> icmpv6_send -> icmp6_send (error handling)
2) ip6_push_pending_frames: rawv6_sendmsg -> rawv6_push_pending_frames -> ...
(only in case of icmp protocol with raw sockets in error handling)
3) ping6_v6_sendmsg (error handling)

Fixes: c15b1ccadb323ea ("ipv6: move DAD and addrconf_verify processing to workqueue")
Reported-by: Fabio Estevam <***@gmail.com>
Tested-by: Fabio Estevam <***@freescale.com>
Cc: Eric Dumazet <***@gmail.com>
Signed-off-by: Hannes Frederic Sowa <***@stressinduktion.org>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/ipv6/icmp.c | 2 +-
net/ipv6/ip6_output.c | 4 ++--
net/ipv6/mcast.c | 11 ++++++-----
net/ipv6/ping.c | 4 ++--
4 files changed, 11 insertions(+), 10 deletions(-)

diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index eef8d945b362..e2c9ff840f63 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -516,7 +516,7 @@ static void icmp6_send(struct sk_buff *skb, u8 type, u8 code, __u32 info)
np->tclass, NULL, &fl6, (struct rt6_info *)dst,
MSG_DONTWAIT, np->dontfrag);
if (err) {
- ICMP6_INC_STATS_BH(net, idev, ICMP6_MIB_OUTERRORS);
+ ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTERRORS);
ip6_flush_pending_frames(sk);
} else {
err = icmpv6_push_pending_frames(sk, &fl6, &tmp_hdr,
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 49f85d49cdb4..516e136f15ca 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1535,8 +1535,8 @@ int ip6_push_pending_frames(struct sock *sk)
if (proto == IPPROTO_ICMPV6) {
struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));

- ICMP6MSGOUT_INC_STATS_BH(net, idev, icmp6_hdr(skb)->icmp6_type);
- ICMP6_INC_STATS_BH(net, idev, ICMP6_MIB_OUTMSGS);
+ ICMP6MSGOUT_INC_STATS(net, idev, icmp6_hdr(skb)->icmp6_type);
+ ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTMSGS);
}

err = ip6_local_out(skb);
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index d18f9f903db6..d81abd5ba767 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -1620,11 +1620,12 @@ static void mld_sendpack(struct sk_buff *skb)
dst_output);
out:
if (!err) {
- ICMP6MSGOUT_INC_STATS_BH(net, idev, ICMPV6_MLD2_REPORT);
- ICMP6_INC_STATS_BH(net, idev, ICMP6_MIB_OUTMSGS);
- IP6_UPD_PO_STATS_BH(net, idev, IPSTATS_MIB_OUTMCAST, payload_len);
- } else
- IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_OUTDISCARDS);
+ ICMP6MSGOUT_INC_STATS(net, idev, ICMPV6_MLD2_REPORT);
+ ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTMSGS);
+ IP6_UPD_PO_STATS(net, idev, IPSTATS_MIB_OUTMCAST, payload_len);
+ } else {
+ IP6_INC_STATS(net, idev, IPSTATS_MIB_OUTDISCARDS);
+ }

rcu_read_unlock();
return;
diff --git a/net/ipv6/ping.c b/net/ipv6/ping.c
index 7856e962a3e6..6acab0bce9d8 100644
--- a/net/ipv6/ping.c
+++ b/net/ipv6/ping.c
@@ -182,8 +182,8 @@ int ping_v6_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
MSG_DONTWAIT, np->dontfrag);

if (err) {
- ICMP6_INC_STATS_BH(sock_net(sk), rt->rt6i_idev,
- ICMP6_MIB_OUTERRORS);
+ ICMP6_INC_STATS(sock_net(sk), rt->rt6i_idev,
+ ICMP6_MIB_OUTERRORS);
ip6_flush_pending_frames(sk);
} else {
err = icmpv6_push_pending_frames(sk, &fl6,
--
1.9.2
Jiri Slaby
2014-04-18 09:22:32 UTC
Permalink
From: Vlad Yasevich <***@redhat.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit fc0d48b8fb449ca007b2057328abf736cb516168 ]

Currently, if the card supports CTAG acceleration we do not
account for the vlan header even if we are configuring an
8021AD vlan. This may not be best since we'll do software
tagging for 8021AD which will cause data copy on skb head expansion
Configure the length based on available hw offload capabilities and
vlan protocol.

CC: Patrick McHardy <***@trash.net>
Signed-off-by: Vlad Yasevich <***@redhat.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/8021q/vlan.c | 4 +++-
net/8021q/vlan_dev.c | 3 ++-
2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index 61fc573f1142..856499fdb10f 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -307,9 +307,11 @@ static void vlan_sync_address(struct net_device *dev,
static void vlan_transfer_features(struct net_device *dev,
struct net_device *vlandev)
{
+ struct vlan_dev_priv *vlan = vlan_dev_priv(vlandev);
+
vlandev->gso_max_size = dev->gso_max_size;

- if (dev->features & NETIF_F_HW_VLAN_CTAG_TX)
+ if (vlan_hw_offload_capable(dev->features, vlan->vlan_proto))
vlandev->hard_header_len = dev->hard_header_len;
else
vlandev->hard_header_len = dev->hard_header_len + VLAN_HLEN;
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index dc7d8da441dd..d1537dcd4df8 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -611,7 +611,8 @@ static int vlan_dev_init(struct net_device *dev)
#endif

dev->needed_headroom = real_dev->needed_headroom;
- if (real_dev->features & NETIF_F_HW_VLAN_CTAG_TX) {
+ if (vlan_hw_offload_capable(real_dev->features,
+ vlan_dev_priv(dev)->vlan_proto)) {
dev->header_ops = &vlan_passthru_header_ops;
dev->hard_header_len = real_dev->hard_header_len;
} else {
--
1.9.2
Jiri Slaby
2014-04-18 09:22:30 UTC
Permalink
From: Vlad Yasevich <***@redhat.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit 51dfe7b944998eaeb2b34d314f3a6b16a5fd621b ]

Including hardware acceleration features in vlan_features breaks
stacked vlans (Q-in-Q) by marking the bottom vlan interface as
capable of acceleration. This causes one of the tags to be lost
and the packets are sent with a sing vlan header.

CC: Nithin Nayak Sujir <***@broadcom.com>
CC: Michael Chan <***@broadcom.com>
Signed-off-by: Vlad Yasevich <***@redhat.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/net/ethernet/broadcom/tg3.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 14a50a11d72e..aae7ba66e7bb 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -17480,8 +17480,6 @@ static int tg3_init_one(struct pci_dev *pdev,

tg3_init_bufmgr_config(tp);

- features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
-
/* 5700 B0 chips do not support checksumming correctly due
* to hardware bugs.
*/
@@ -17513,7 +17511,8 @@ static int tg3_init_one(struct pci_dev *pdev,
features |= NETIF_F_TSO_ECN;
}

- dev->features |= features;
+ dev->features |= features | NETIF_F_HW_VLAN_CTAG_TX |
+ NETIF_F_HW_VLAN_CTAG_RX;
dev->vlan_features |= features;

/*
--
1.9.2
Jiri Slaby
2014-04-18 09:22:29 UTC
Permalink
From: Pravin B Shelar <***@nicira.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit fbd02dd405d0724a0f25897ed4a6813297c9b96f ]

Commit 10ddceb22ba (ip_tunnel:multicast process cause panic due
to skb->_skb_refdst NULL pointer) removed dst-drop call from
ip-tunnel-recv.

Following commit reintroduce dst-drop and fix the original bug by
checking loopback packet before releasing dst.
Original bug: https://bugzilla.kernel.org/show_bug.cgi?id=70681

CC: Xin Long <***@gmail.com>
Signed-off-by: Pravin B Shelar <***@nicira.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/ipv4/gre_demux.c | 8 ++++++++
net/ipv4/ip_tunnel.c | 3 ---
net/ipv4/ip_tunnel_core.c | 1 +
3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/net/ipv4/gre_demux.c b/net/ipv4/gre_demux.c
index 736c9fc3ef93..0c0c1f09fd17 100644
--- a/net/ipv4/gre_demux.c
+++ b/net/ipv4/gre_demux.c
@@ -211,6 +211,14 @@ static int gre_cisco_rcv(struct sk_buff *skb)
int i;
bool csum_err = false;

+#ifdef CONFIG_NET_IPGRE_BROADCAST
+ if (ipv4_is_multicast(ip_hdr(skb)->daddr)) {
+ /* Looped back packet, drop it! */
+ if (rt_is_output_route(skb_rtable(skb)))
+ goto drop;
+ }
+#endif
+
if (parse_gre_header(skb, &tpi, &csum_err) < 0)
goto drop;

diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c
index 995a0bb33a65..3bedb26cfb53 100644
--- a/net/ipv4/ip_tunnel.c
+++ b/net/ipv4/ip_tunnel.c
@@ -411,9 +411,6 @@ int ip_tunnel_rcv(struct ip_tunnel *tunnel, struct sk_buff *skb,

#ifdef CONFIG_NET_IPGRE_BROADCAST
if (ipv4_is_multicast(iph->daddr)) {
- /* Looped back packet, drop it! */
- if (rt_is_output_route(skb_rtable(skb)))
- goto drop;
tunnel->dev->stats.multicast++;
skb->pkt_type = PACKET_BROADCAST;
}
diff --git a/net/ipv4/ip_tunnel_core.c b/net/ipv4/ip_tunnel_core.c
index ba22cc3a5a53..c31e3ad98ef2 100644
--- a/net/ipv4/ip_tunnel_core.c
+++ b/net/ipv4/ip_tunnel_core.c
@@ -109,6 +109,7 @@ int iptunnel_pull_header(struct sk_buff *skb, int hdr_len, __be16 inner_proto)
secpath_reset(skb);
if (!skb->l4_rxhash)
skb->rxhash = 0;
+ skb_dst_drop(skb);
skb->vlan_tci = 0;
skb_set_queue_mapping(skb, 0);
skb->pkt_type = PACKET_HOST;
--
1.9.2
Jiri Slaby
2014-04-18 09:22:31 UTC
Permalink
From: Oliver Neukum <***@suse.de>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit 14a0d635d18d0fb552dcc979d6d25106e6541f2e ]

This fixes a race which happens by freeing an object on the stack.
The issue is
that it calls usbnet_terminate_urbs() before that, which temporarily
installs a waitqueue in dev->wait in order to be able to wait on the
tasklet to run and finish up some queues. The waiting itself looks
okay, but the access to 'dev->wait' is totally unprotected and can
race arbitrarily. I think in this case usbnet_bh() managed to succeed
it's dev->wait check just before usbnet_terminate_urbs() sets it back
to NULL. The latter then finishes and the waitqueue_t structure on its
stack gets overwritten by other functions halfway through the
wake_up() call in usbnet_bh().
The fix is to just not allocate the data structure on the stack.
As dev->wait is abused as a flag it also takes a runtime PM change
to fix this bug.

Signed-off-by: Oliver Neukum <***@suse.de>
Reported-by: Grant Grundler <***@google.com>
Tested-by: Grant Grundler <***@google.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/net/usb/usbnet.c | 33 +++++++++++++++++++--------------
include/linux/usb/usbnet.h | 2 +-
2 files changed, 20 insertions(+), 15 deletions(-)

diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index a91fa49b81c3..1d4da74595f9 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -753,14 +753,12 @@ EXPORT_SYMBOL_GPL(usbnet_unlink_rx_urbs);
// precondition: never called in_interrupt
static void usbnet_terminate_urbs(struct usbnet *dev)
{
- DECLARE_WAIT_QUEUE_HEAD_ONSTACK(unlink_wakeup);
DECLARE_WAITQUEUE(wait, current);
int temp;

/* ensure there are no more active urbs */
- add_wait_queue(&unlink_wakeup, &wait);
+ add_wait_queue(&dev->wait, &wait);
set_current_state(TASK_UNINTERRUPTIBLE);
- dev->wait = &unlink_wakeup;
temp = unlink_urbs(dev, &dev->txq) +
unlink_urbs(dev, &dev->rxq);

@@ -774,15 +772,14 @@ static void usbnet_terminate_urbs(struct usbnet *dev)
"waited for %d urb completions\n", temp);
}
set_current_state(TASK_RUNNING);
- dev->wait = NULL;
- remove_wait_queue(&unlink_wakeup, &wait);
+ remove_wait_queue(&dev->wait, &wait);
}

int usbnet_stop (struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
struct driver_info *info = dev->driver_info;
- int retval;
+ int retval, pm;

clear_bit(EVENT_DEV_OPEN, &dev->flags);
netif_stop_queue (net);
@@ -792,6 +789,8 @@ int usbnet_stop (struct net_device *net)
net->stats.rx_packets, net->stats.tx_packets,
net->stats.rx_errors, net->stats.tx_errors);

+ /* to not race resume */
+ pm = usb_autopm_get_interface(dev->intf);
/* allow minidriver to stop correctly (wireless devices to turn off
* radio etc) */
if (info->stop) {
@@ -818,6 +817,9 @@ int usbnet_stop (struct net_device *net)
dev->flags = 0;
del_timer_sync (&dev->delay);
tasklet_kill (&dev->bh);
+ if (!pm)
+ usb_autopm_put_interface(dev->intf);
+
if (info->manage_power &&
!test_and_clear_bit(EVENT_NO_RUNTIME_PM, &dev->flags))
info->manage_power(dev, 0);
@@ -1438,11 +1440,12 @@ static void usbnet_bh (unsigned long param)
/* restart RX again after disabling due to high error rate */
clear_bit(EVENT_RX_KILL, &dev->flags);

- // waiting for all pending urbs to complete?
- if (dev->wait) {
- if ((dev->txq.qlen + dev->rxq.qlen + dev->done.qlen) == 0) {
- wake_up (dev->wait);
- }
+ /* waiting for all pending urbs to complete?
+ * only then can we forgo submitting anew
+ */
+ if (waitqueue_active(&dev->wait)) {
+ if (dev->txq.qlen + dev->rxq.qlen + dev->done.qlen == 0)
+ wake_up_all(&dev->wait);

// or are we maybe short a few urbs?
} else if (netif_running (dev->net) &&
@@ -1581,6 +1584,7 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
dev->driver_name = name;
dev->msg_enable = netif_msg_init (msg_level, NETIF_MSG_DRV
| NETIF_MSG_PROBE | NETIF_MSG_LINK);
+ init_waitqueue_head(&dev->wait);
skb_queue_head_init (&dev->rxq);
skb_queue_head_init (&dev->txq);
skb_queue_head_init (&dev->done);
@@ -1792,9 +1796,10 @@ int usbnet_resume (struct usb_interface *intf)
spin_unlock_irq(&dev->txq.lock);

if (test_bit(EVENT_DEV_OPEN, &dev->flags)) {
- /* handle remote wakeup ASAP */
- if (!dev->wait &&
- netif_device_present(dev->net) &&
+ /* handle remote wakeup ASAP
+ * we cannot race against stop
+ */
+ if (netif_device_present(dev->net) &&
!timer_pending(&dev->delay) &&
!test_bit(EVENT_RX_HALT, &dev->flags))
rx_alloc_submit(dev, GFP_NOIO);
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index e303eef94dd5..0662e98fef72 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -30,7 +30,7 @@ struct usbnet {
struct driver_info *driver_info;
const char *driver_name;
void *driver_priv;
- wait_queue_head_t *wait;
+ wait_queue_head_t wait;
struct mutex phy_mutex;
unsigned char suspend_count;
unsigned char pkt_cnt, pkt_err;
--
1.9.2
Jiri Slaby
2014-04-18 09:22:27 UTC
Permalink
From: Li RongQing <***@gmail.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Not applicable upstream commit, the code here has been removed
upstream. ]

Neighbor Solicitation is ipv6 protocol, so we should check
skb->protocol with ETH_P_IPV6

Signed-off-by: Li RongQing <***@gmail.com>
Cc: WANG Cong <***@redhat.com>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/core/netpoll.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 462cdc97fad8..9b40f234b802 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -740,7 +740,7 @@ static bool pkt_is_ns(struct sk_buff *skb)
struct nd_msg *msg;
struct ipv6hdr *hdr;

- if (skb->protocol != htons(ETH_P_ARP))
+ if (skb->protocol != htons(ETH_P_IPV6))
return false;
if (!pskb_may_pull(skb, sizeof(struct ipv6hdr) + sizeof(struct nd_msg)))
return false;
--
1.9.2
Jiri Slaby
2014-04-18 09:22:34 UTC
Permalink
From: "Michael S. Tsirkin" <***@redhat.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit a39ee449f96a2cd44ce056d8a0a112211a9b1a1f ]

vhost fails to validate negative error code
from vhost_get_vq_desc causing
a crash: we are using -EFAULT which is 0xfffffff2
as vector size, which exceeds the allocated size.

The code in question was introduced in commit
8dd014adfea6f173c1ef6378f7e5e7924866c923
vhost-net: mergeable buffers support

CVE-2014-0055

Signed-off-by: Michael S. Tsirkin <***@redhat.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/vhost/net.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index e5522d9f59e8..5264d839474a 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -501,9 +501,13 @@ static int get_rx_bufs(struct vhost_virtqueue *vq,
r = -ENOBUFS;
goto err;
}
- d = vhost_get_vq_desc(vq->dev, vq, vq->iov + seg,
+ r = vhost_get_vq_desc(vq->dev, vq, vq->iov + seg,
ARRAY_SIZE(vq->iov) - seg, &out,
&in, log, log_num);
+ if (unlikely(r < 0))
+ goto err;
+
+ d = r;
if (d == vq->num) {
r = 0;
goto err;
--
1.9.2
Jiri Slaby
2014-04-18 09:22:25 UTC
Permalink
From: Nicolas Dichtel <***@6wind.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit f518338b16038beeb73e155e60d0f70beb9379f4 ]

Commit 812e44dd1829 ("ip6mr: advertise new mfc entries via rtnl") reuses the
function ip6mr_fill_mroute() to notify mfc events.
But this function was used only for dump and thus was always setting the
flag NLM_F_MULTI, which is wrong in case of a single notification.

Libraries like libnl will wait forever for NLMSG_DONE.

CC: Thomas Graf <***@suug.ch>
Signed-off-by: Nicolas Dichtel <***@6wind.com>
Acked-by: Thomas Graf <***@suug.ch>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/ipv6/ip6mr.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 0eb4038a4d63..8737400af0a0 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -2349,13 +2349,14 @@ int ip6mr_get_route(struct net *net,
}

static int ip6mr_fill_mroute(struct mr6_table *mrt, struct sk_buff *skb,
- u32 portid, u32 seq, struct mfc6_cache *c, int cmd)
+ u32 portid, u32 seq, struct mfc6_cache *c, int cmd,
+ int flags)
{
struct nlmsghdr *nlh;
struct rtmsg *rtm;
int err;

- nlh = nlmsg_put(skb, portid, seq, cmd, sizeof(*rtm), NLM_F_MULTI);
+ nlh = nlmsg_put(skb, portid, seq, cmd, sizeof(*rtm), flags);
if (nlh == NULL)
return -EMSGSIZE;

@@ -2423,7 +2424,7 @@ static void mr6_netlink_event(struct mr6_table *mrt, struct mfc6_cache *mfc,
if (skb == NULL)
goto errout;

- err = ip6mr_fill_mroute(mrt, skb, 0, 0, mfc, cmd);
+ err = ip6mr_fill_mroute(mrt, skb, 0, 0, mfc, cmd, 0);
if (err < 0)
goto errout;

@@ -2462,7 +2463,8 @@ static int ip6mr_rtm_dumproute(struct sk_buff *skb, struct netlink_callback *cb)
if (ip6mr_fill_mroute(mrt, skb,
NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq,
- mfc, RTM_NEWROUTE) < 0)
+ mfc, RTM_NEWROUTE,
+ NLM_F_MULTI) < 0)
goto done;
next_entry:
e++;
@@ -2476,7 +2478,8 @@ next_entry:
if (ip6mr_fill_mroute(mrt, skb,
NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq,
- mfc, RTM_NEWROUTE) < 0) {
+ mfc, RTM_NEWROUTE,
+ NLM_F_MULTI) < 0) {
spin_unlock_bh(&mfc_unres_lock);
goto done;
}
--
1.9.2
Jiri Slaby
2014-04-18 09:22:00 UTC
Permalink
From: Ying Xue <***@windriver.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit 6d4ebeb4df0176b1973875840a9f7e91394c0685 ]

Currently connection shutdown callback function is called when
connection instance is released in tipc_conn_kref_release(), and
receiving packets and sending packets are running in different
threads. Even if connection is closed by the thread of receiving
packets, its shutdown callback may not be called immediately as
the connection reference count is non-zero at that moment. So,
although the connection is shut down by the thread of receiving
packets, the thread of sending packets doesn't know it. Before
its shutdown callback is invoked to tell the sending thread its
connection has been closed, the sending thread may deliver
messages by tipc_conn_sendmsg(), this is why the following error
information appears:

"Sending subscription event failed, no memory"

To eliminate it, allow connection shutdown callback function to
be called before connection id is removed in tipc_close_conn(),
which makes the sending thread know the truth in time that its
socket is closed so that it doesn't send message to it. We also
remove the "Sending XXX failed..." error reporting for topology
and config services.

Signed-off-by: Ying Xue <***@windriver.com>
Signed-off-by: Erik Hugne <***@ericsson.com>
Reviewed-by: Jon Maloy <***@ericsson.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/tipc/config.c | 9 ++-------
net/tipc/server.c | 8 +++-----
net/tipc/subscr.c | 8 ++------
3 files changed, 7 insertions(+), 18 deletions(-)

diff --git a/net/tipc/config.c b/net/tipc/config.c
index c301a9a592d8..5afe633114e0 100644
--- a/net/tipc/config.c
+++ b/net/tipc/config.c
@@ -376,7 +376,6 @@ static void cfg_conn_msg_event(int conid, struct sockaddr_tipc *addr,
struct tipc_cfg_msg_hdr *req_hdr;
struct tipc_cfg_msg_hdr *rep_hdr;
struct sk_buff *rep_buf;
- int ret;

/* Validate configuration message header (ignore invalid message) */
req_hdr = (struct tipc_cfg_msg_hdr *)buf;
@@ -398,12 +397,8 @@ static void cfg_conn_msg_event(int conid, struct sockaddr_tipc *addr,
memcpy(rep_hdr, req_hdr, sizeof(*rep_hdr));
rep_hdr->tcm_len = htonl(rep_buf->len);
rep_hdr->tcm_flags &= htons(~TCM_F_REQUEST);
-
- ret = tipc_conn_sendmsg(&cfgsrv, conid, addr, rep_buf->data,
- rep_buf->len);
- if (ret < 0)
- pr_err("Sending cfg reply message failed, no memory\n");
-
+ tipc_conn_sendmsg(&cfgsrv, conid, addr, rep_buf->data,
+ rep_buf->len);
kfree_skb(rep_buf);
}
}
diff --git a/net/tipc/server.c b/net/tipc/server.c
index fd3fa57a410e..ae474479f12e 100644
--- a/net/tipc/server.c
+++ b/net/tipc/server.c
@@ -87,7 +87,6 @@ static void tipc_clean_outqueues(struct tipc_conn *con);
static void tipc_conn_kref_release(struct kref *kref)
{
struct tipc_conn *con = container_of(kref, struct tipc_conn, kref);
- struct tipc_server *s = con->server;

if (con->sock) {
tipc_sock_release_local(con->sock);
@@ -95,10 +94,6 @@ static void tipc_conn_kref_release(struct kref *kref)
}

tipc_clean_outqueues(con);
-
- if (con->conid)
- s->tipc_conn_shutdown(con->conid, con->usr_data);
-
kfree(con);
}

@@ -181,6 +176,9 @@ static void tipc_close_conn(struct tipc_conn *con)
struct tipc_server *s = con->server;

if (test_and_clear_bit(CF_CONNECTED, &con->flags)) {
+ if (con->conid)
+ s->tipc_conn_shutdown(con->conid, con->usr_data);
+
spin_lock_bh(&s->idr_lock);
idr_remove(&s->conn_idr, con->conid);
s->idr_in_use--;
diff --git a/net/tipc/subscr.c b/net/tipc/subscr.c
index d38bb45d82e9..13f48bb5e540 100644
--- a/net/tipc/subscr.c
+++ b/net/tipc/subscr.c
@@ -96,20 +96,16 @@ static void subscr_send_event(struct tipc_subscription *sub, u32 found_lower,
{
struct tipc_subscriber *subscriber = sub->subscriber;
struct kvec msg_sect;
- int ret;

msg_sect.iov_base = (void *)&sub->evt;
msg_sect.iov_len = sizeof(struct tipc_event);
-
sub->evt.event = htohl(event, sub->swap);
sub->evt.found_lower = htohl(found_lower, sub->swap);
sub->evt.found_upper = htohl(found_upper, sub->swap);
sub->evt.port.ref = htohl(port_ref, sub->swap);
sub->evt.port.node = htohl(node, sub->swap);
- ret = tipc_conn_sendmsg(&topsrv, subscriber->conid, NULL,
- msg_sect.iov_base, msg_sect.iov_len);
- if (ret < 0)
- pr_err("Sending subscription event failed, no memory\n");
+ tipc_conn_sendmsg(&topsrv, subscriber->conid, NULL, msg_sect.iov_base,
+ msg_sect.iov_len);
}

/**
--
1.9.2
Jiri Slaby
2014-04-18 09:22:01 UTC
Permalink
From: Ying Xue <***@windriver.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit 4652edb70e8a7eebbe47fa931940f65522c36e8f ]

When tipc_conn_sendmsg() calls tipc_conn_lookup() to query a
connection instance, its reference count value is increased if
it's found. But subsequently if it's found that the connection is
closed, the work of sending message is not queued into its server
send workqueue, and the connection reference count is not decreased.
This will cause a reference count leak. To reproduce this problem,
an application would need to open and closes topology server
connections with high intensity.

We fix this by immediately decrementing the connection reference
count if a send fails due to the connection being closed.

Signed-off-by: Ying Xue <***@windriver.com>
Acked-by: Erik Hugne <***@ericsson.com>
Reviewed-by: Jon Maloy <***@ericsson.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/tipc/server.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/tipc/server.c b/net/tipc/server.c
index ae474479f12e..bd2336aad0e4 100644
--- a/net/tipc/server.c
+++ b/net/tipc/server.c
@@ -427,10 +427,12 @@ int tipc_conn_sendmsg(struct tipc_server *s, int conid,
list_add_tail(&e->list, &con->outqueue);
spin_unlock_bh(&con->outqueue_lock);

- if (test_bit(CF_CONNECTED, &con->flags))
+ if (test_bit(CF_CONNECTED, &con->flags)) {
if (!queue_work(s->send_wq, &con->swork))
conn_put(con);
-
+ } else {
+ conn_put(con);
+ }
return 0;
}
--
1.9.2
Jiri Slaby
2014-04-18 09:22:15 UTC
Permalink
From: Matthew Leach <***@arm.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit dbb490b96584d4e958533fb637f08b557f505657 ]

When copying in a struct msghdr from the user, if the user has set the
msg_namelen parameter to a negative value it gets clamped to a valid
size due to a comparison between signed and unsigned values.

Ensure the syscall errors when the user passes in a negative value.

Signed-off-by: Matthew Leach <***@arm.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/socket.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/net/socket.c b/net/socket.c
index e83c416708af..dc57dae20a9a 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -1972,6 +1972,10 @@ static int copy_msghdr_from_user(struct msghdr *kmsg,
{
if (copy_from_user(kmsg, umsg, sizeof(struct msghdr)))
return -EFAULT;
+
+ if (kmsg->msg_namelen < 0)
+ return -EINVAL;
+
if (kmsg->msg_namelen > sizeof(struct sockaddr_storage))
kmsg->msg_namelen = sizeof(struct sockaddr_storage);
return 0;
--
1.9.2
Jiri Slaby
2014-04-18 09:22:24 UTC
Permalink
From: Nicolas Dichtel <***@6wind.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit 65886f439ab0fdc2dff20d1fa87afb98c6717472 ]

Commit 8cd3ac9f9b7b ("ipmr: advertise new mfc entries via rtnl") reuses the
function ipmr_fill_mroute() to notify mfc events.
But this function was used only for dump and thus was always setting the
flag NLM_F_MULTI, which is wrong in case of a single notification.

Libraries like libnl will wait forever for NLMSG_DONE.

CC: Thomas Graf <***@suug.ch>
Signed-off-by: Nicolas Dichtel <***@6wind.com>
Acked-by: Thomas Graf <***@suug.ch>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/ipv4/ipmr.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 1672409f5ba5..6fbf3393d842 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -2253,13 +2253,14 @@ int ipmr_get_route(struct net *net, struct sk_buff *skb,
}

static int ipmr_fill_mroute(struct mr_table *mrt, struct sk_buff *skb,
- u32 portid, u32 seq, struct mfc_cache *c, int cmd)
+ u32 portid, u32 seq, struct mfc_cache *c, int cmd,
+ int flags)
{
struct nlmsghdr *nlh;
struct rtmsg *rtm;
int err;

- nlh = nlmsg_put(skb, portid, seq, cmd, sizeof(*rtm), NLM_F_MULTI);
+ nlh = nlmsg_put(skb, portid, seq, cmd, sizeof(*rtm), flags);
if (nlh == NULL)
return -EMSGSIZE;

@@ -2327,7 +2328,7 @@ static void mroute_netlink_event(struct mr_table *mrt, struct mfc_cache *mfc,
if (skb == NULL)
goto errout;

- err = ipmr_fill_mroute(mrt, skb, 0, 0, mfc, cmd);
+ err = ipmr_fill_mroute(mrt, skb, 0, 0, mfc, cmd, 0);
if (err < 0)
goto errout;

@@ -2366,7 +2367,8 @@ static int ipmr_rtm_dumproute(struct sk_buff *skb, struct netlink_callback *cb)
if (ipmr_fill_mroute(mrt, skb,
NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq,
- mfc, RTM_NEWROUTE) < 0)
+ mfc, RTM_NEWROUTE,
+ NLM_F_MULTI) < 0)
goto done;
next_entry:
e++;
@@ -2380,7 +2382,8 @@ next_entry:
if (ipmr_fill_mroute(mrt, skb,
NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq,
- mfc, RTM_NEWROUTE) < 0) {
+ mfc, RTM_NEWROUTE,
+ NLM_F_MULTI) < 0) {
spin_unlock_bh(&mfc_unres_lock);
goto done;
}
--
1.9.2
Jiri Slaby
2014-04-18 09:22:33 UTC
Permalink
From: "Michael S. Tsirkin" <***@redhat.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit d8316f3991d207fe32881a9ac20241be8fa2bad0 ]

When mergeable buffers are disabled, and the
incoming packet is too large for the rx buffer,
get_rx_bufs returns success.

This was intentional in order for make recvmsg
truncate the packet and then handle_rx would
detect err != sock_len and drop it.

Unfortunately we pass the original sock_len to
recvmsg - which means we use parts of iov not fully
validated.

Fix this up by detecting this overrun and doing packet drop
immediately.

CVE-2014-0077

Signed-off-by: Michael S. Tsirkin <***@redhat.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/vhost/net.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index b12176f2013c..e5522d9f59e8 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -528,6 +528,12 @@ static int get_rx_bufs(struct vhost_virtqueue *vq,
*iovcount = seg;
if (unlikely(log))
*log_num = nlogs;
+
+ /* Detect overrun */
+ if (unlikely(datalen > 0)) {
+ r = UIO_MAXIOV + 1;
+ goto err;
+ }
return headcount;
err:
vhost_discard_vq_desc(vq, headcount);
@@ -583,6 +589,14 @@ static void handle_rx(struct vhost_net *net)
/* On error, stop handling until the next kick. */
if (unlikely(headcount < 0))
break;
+ /* On overrun, truncate and discard */
+ if (unlikely(headcount > UIO_MAXIOV)) {
+ msg.msg_iovlen = 1;
+ err = sock->ops->recvmsg(NULL, sock, &msg,
+ 1, MSG_DONTWAIT | MSG_TRUNC);
+ pr_debug("Discarded rx packet: len %zd\n", sock_len);
+ continue;
+ }
/* OK, now we need to know about added descriptors. */
if (!headcount) {
if (unlikely(vhost_enable_notify(&net->dev, vq))) {
--
1.9.2
Jiri Slaby
2014-04-18 09:22:28 UTC
Permalink
From: Erik Hugne <***@ericsson.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit a5d0e7c037119484a7006b883618bfa87996cb41 ]

If a topology event subscription fails for any reason, such as out
of memory, max number reached or because we received an invalid
request the correct behavior is to terminate the subscribers
connection to the topology server. This is currently broken and
produces the following oops:

[27.953662] tipc: Subscription rejected, illegal request
[27.955329] BUG: spinlock recursion on CPU#1, kworker/u4:0/6
[27.957066] lock: 0xffff88003c67f408, .magic: dead4ead, .owner: kworker/u4:0/6, .owner_cpu: 1
[27.958054] CPU: 1 PID: 6 Comm: kworker/u4:0 Not tainted 3.14.0-rc6+ #5
[27.960230] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[27.960874] Workqueue: tipc_rcv tipc_recv_work [tipc]
[27.961430] ffff88003c67f408 ffff88003de27c18 ffffffff815c0207 ffff88003de1c050
[27.962292] ffff88003de27c38 ffffffff815beec5 ffff88003c67f408 ffffffff817f0a8a
[27.963152] ffff88003de27c58 ffffffff815beeeb ffff88003c67f408 ffffffffa0013520
[27.964023] Call Trace:
[27.964292] [<ffffffff815c0207>] dump_stack+0x45/0x56
[27.964874] [<ffffffff815beec5>] spin_dump+0x8c/0x91
[27.965420] [<ffffffff815beeeb>] spin_bug+0x21/0x26
[27.965995] [<ffffffff81083df6>] do_raw_spin_lock+0x116/0x140
[27.966631] [<ffffffff815c6215>] _raw_spin_lock_bh+0x15/0x20
[27.967256] [<ffffffffa0008540>] subscr_conn_shutdown_event+0x20/0xa0 [tipc]
[27.968051] [<ffffffffa000fde4>] tipc_close_conn+0xa4/0xb0 [tipc]
[27.968722] [<ffffffffa00101ba>] tipc_conn_terminate+0x1a/0x30 [tipc]
[27.969436] [<ffffffffa00089a2>] subscr_conn_msg_event+0x1f2/0x2f0 [tipc]
[27.970209] [<ffffffffa0010000>] tipc_receive_from_sock+0x90/0xf0 [tipc]
[27.970972] [<ffffffffa000fa79>] tipc_recv_work+0x29/0x50 [tipc]
[27.971633] [<ffffffff8105dbf5>] process_one_work+0x165/0x3e0
[27.972267] [<ffffffff8105e869>] worker_thread+0x119/0x3a0
[27.972896] [<ffffffff8105e750>] ? manage_workers.isra.25+0x2a0/0x2a0
[27.973622] [<ffffffff810648af>] kthread+0xdf/0x100
[27.974168] [<ffffffff810647d0>] ? kthread_create_on_node+0x1a0/0x1a0
[27.974893] [<ffffffff815ce13c>] ret_from_fork+0x7c/0xb0
[27.975466] [<ffffffff810647d0>] ? kthread_create_on_node+0x1a0/0x1a0

The recursion occurs when subscr_terminate tries to grab the
subscriber lock, which is already taken by subscr_conn_msg_event.
We fix this by checking if the request to establish a new
subscription was successful, and if not we initiate termination of
the subscriber after we have released the subscriber lock.

Signed-off-by: Erik Hugne <***@ericsson.com>
Reviewed-by: Jon Maloy <***@ericsson.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/tipc/subscr.c | 29 +++++++++++++++--------------
1 file changed, 15 insertions(+), 14 deletions(-)

diff --git a/net/tipc/subscr.c b/net/tipc/subscr.c
index 78bdf1db4cdf..c2a37aa12498 100644
--- a/net/tipc/subscr.c
+++ b/net/tipc/subscr.c
@@ -263,9 +263,9 @@ static void subscr_cancel(struct tipc_subscr *s,
*
* Called with subscriber lock held.
*/
-static struct tipc_subscription *subscr_subscribe(struct tipc_subscr *s,
- struct tipc_subscriber *subscriber)
-{
+static int subscr_subscribe(struct tipc_subscr *s,
+ struct tipc_subscriber *subscriber,
+ struct tipc_subscription **sub_p) {
struct tipc_subscription *sub;
int swap;

@@ -276,23 +276,21 @@ static struct tipc_subscription *subscr_subscribe(struct tipc_subscr *s,
if (s->filter & htohl(TIPC_SUB_CANCEL, swap)) {
s->filter &= ~htohl(TIPC_SUB_CANCEL, swap);
subscr_cancel(s, subscriber);
- return NULL;
+ return 0;
}

/* Refuse subscription if global limit exceeded */
if (atomic_read(&subscription_count) >= TIPC_MAX_SUBSCRIPTIONS) {
pr_warn("Subscription rejected, limit reached (%u)\n",
TIPC_MAX_SUBSCRIPTIONS);
- subscr_terminate(subscriber);
- return NULL;
+ return -EINVAL;
}

/* Allocate subscription object */
sub = kmalloc(sizeof(*sub), GFP_ATOMIC);
if (!sub) {
pr_warn("Subscription rejected, no memory\n");
- subscr_terminate(subscriber);
- return NULL;
+ return -ENOMEM;
}

/* Initialize subscription object */
@@ -306,8 +304,7 @@ static struct tipc_subscription *subscr_subscribe(struct tipc_subscr *s,
(sub->seq.lower > sub->seq.upper)) {
pr_warn("Subscription rejected, illegal request\n");
kfree(sub);
- subscr_terminate(subscriber);
- return NULL;
+ return -EINVAL;
}
INIT_LIST_HEAD(&sub->nameseq_list);
list_add(&sub->subscription_list, &subscriber->subscription_list);
@@ -320,8 +317,8 @@ static struct tipc_subscription *subscr_subscribe(struct tipc_subscr *s,
(Handler)subscr_timeout, (unsigned long)sub);
k_start_timer(&sub->timer, sub->timeout);
}
-
- return sub;
+ *sub_p = sub;
+ return 0;
}

/* Handle one termination request for the subscriber */
@@ -335,10 +332,14 @@ static void subscr_conn_msg_event(int conid, struct sockaddr_tipc *addr,
void *usr_data, void *buf, size_t len)
{
struct tipc_subscriber *subscriber = usr_data;
- struct tipc_subscription *sub;
+ struct tipc_subscription *sub = NULL;

spin_lock_bh(&subscriber->lock);
- sub = subscr_subscribe((struct tipc_subscr *)buf, subscriber);
+ if (subscr_subscribe((struct tipc_subscr *)buf, subscriber, &sub) < 0) {
+ spin_unlock_bh(&subscriber->lock);
+ subscr_terminate(subscriber);
+ return;
+ }
if (sub)
tipc_nametbl_subscribe(sub);
spin_unlock_bh(&subscriber->lock);
--
1.9.2
Jiri Slaby
2014-04-18 09:22:26 UTC
Permalink
From: Nishanth Menon <***@ti.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit ebf4ad955d3e26d4d2a33709624fc7b5b9d3b969 ]

Few platforms use external regulator to keep the ethernet MAC supplied.
So, request and enable the regulator for driver functionality.

Fixes: 66fda75f47dc (regulator: core: Replace direct ops->disable usage)
Reported-by: Russell King <rmk+***@arm.linux.org.uk>
Suggested-by: Markus Pargmann <***@pengutronix.de>
Signed-off-by: Nishanth Menon <***@ti.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
.../devicetree/bindings/net/micrel-ks8851.txt | 1 +
drivers/net/ethernet/micrel/ks8851.c | 30 +++++++++++++++++++++-
2 files changed, 30 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/micrel-ks8851.txt b/Documentation/devicetree/bindings/net/micrel-ks8851.txt
index 11ace3c3d805..4fc392763611 100644
--- a/Documentation/devicetree/bindings/net/micrel-ks8851.txt
+++ b/Documentation/devicetree/bindings/net/micrel-ks8851.txt
@@ -7,3 +7,4 @@ Required properties:

Optional properties:
- local-mac-address : Ethernet mac address to use
+- vdd-supply: supply for Ethernet mac
diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c
index 727b546a9eb8..e0c92e0e5e1d 100644
--- a/drivers/net/ethernet/micrel/ks8851.c
+++ b/drivers/net/ethernet/micrel/ks8851.c
@@ -23,6 +23,7 @@
#include <linux/crc32.h>
#include <linux/mii.h>
#include <linux/eeprom_93cx6.h>
+#include <linux/regulator/consumer.h>

#include <linux/spi/spi.h>

@@ -83,6 +84,7 @@ union ks8851_tx_hdr {
* @rc_rxqcr: Cached copy of KS_RXQCR.
* @eeprom_size: Companion eeprom size in Bytes, 0 if no eeprom
* @eeprom: 93CX6 EEPROM state for accessing on-board EEPROM.
+ * @vdd_reg: Optional regulator supplying the chip
*
* The @lock ensures that the chip is protected when certain operations are
* in progress. When the read or write packet transfer is in progress, most
@@ -130,6 +132,7 @@ struct ks8851_net {
struct spi_transfer spi_xfer2[2];

struct eeprom_93cx6 eeprom;
+ struct regulator *vdd_reg;
};

static int msg_enable;
@@ -1414,6 +1417,21 @@ static int ks8851_probe(struct spi_device *spi)
ks->spidev = spi;
ks->tx_space = 6144;

+ ks->vdd_reg = regulator_get_optional(&spi->dev, "vdd");
+ if (IS_ERR(ks->vdd_reg)) {
+ ret = PTR_ERR(ks->vdd_reg);
+ if (ret == -EPROBE_DEFER)
+ goto err_reg;
+ } else {
+ ret = regulator_enable(ks->vdd_reg);
+ if (ret) {
+ dev_err(&spi->dev, "regulator enable fail: %d\n",
+ ret);
+ goto err_reg_en;
+ }
+ }
+
+
mutex_init(&ks->lock);
spin_lock_init(&ks->statelock);

@@ -1508,8 +1526,14 @@ static int ks8851_probe(struct spi_device *spi)
err_netdev:
free_irq(ndev->irq, ks);

-err_id:
err_irq:
+err_id:
+ if (!IS_ERR(ks->vdd_reg))
+ regulator_disable(ks->vdd_reg);
+err_reg_en:
+ if (!IS_ERR(ks->vdd_reg))
+ regulator_put(ks->vdd_reg);
+err_reg:
free_netdev(ndev);
return ret;
}
@@ -1523,6 +1547,10 @@ static int ks8851_remove(struct spi_device *spi)

unregister_netdev(priv->netdev);
free_irq(spi->irq, priv);
+ if (!IS_ERR(priv->vdd_reg)) {
+ regulator_disable(priv->vdd_reg);
+ regulator_put(priv->vdd_reg);
+ }
free_netdev(priv->netdev);

return 0;
--
1.9.2
Jiri Slaby
2014-04-18 09:22:22 UTC
Permalink
From: Eric Dumazet <***@google.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit 632623153196bf183a69686ed9c07eee98ff1bf8 ]

While it is true that getnstimeofday() uses about 40 cycles if TSC
is available, it can use 1600 cycles if hpet is the clocksource.

Switch to get_jiffies_64(), as this is more than enough, and
go back to 60 seconds periods.

Fixes: 8c27bd75f04f ("tcp: syncookies: reduce cookie lifetime to 128 seconds")
Signed-off-by: Eric Dumazet <***@google.com>
Cc: Florian Westphal <***@strlen.de>
Acked-by: Florian Westphal <***@strlen.de>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
include/net/tcp.h | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/include/net/tcp.h b/include/net/tcp.h
index 51dcc6faa561..31c48908ae32 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -484,20 +484,21 @@ extern struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb,
#ifdef CONFIG_SYN_COOKIES
#include <linux/ktime.h>

-/* Syncookies use a monotonic timer which increments every 64 seconds.
+/* Syncookies use a monotonic timer which increments every 60 seconds.
* This counter is used both as a hash input and partially encoded into
* the cookie value. A cookie is only validated further if the delta
* between the current counter value and the encoded one is less than this,
- * i.e. a sent cookie is valid only at most for 128 seconds (or less if
+ * i.e. a sent cookie is valid only at most for 2*60 seconds (or less if
* the counter advances immediately after a cookie is generated).
*/
#define MAX_SYNCOOKIE_AGE 2

static inline u32 tcp_cookie_time(void)
{
- struct timespec now;
- getnstimeofday(&now);
- return now.tv_sec >> 6; /* 64 seconds granularity */
+ u64 val = get_jiffies_64();
+
+ do_div(val, 60 * HZ);
+ return val;
}

extern u32 __cookie_v4_init_sequence(const struct iphdr *iph,
--
1.9.2
Jiri Slaby
2014-04-18 09:22:21 UTC
Permalink
From: David Stevens <***@us.ibm.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit 4b29dba9c085a4fb79058fb1c45a2f6257ca3dfa ]

The VXLAN neigh_reduce() code is completely non-functional since
check-in. Specific errors:

1) The original code drops all packets with a multicast destination address,
even though neighbor solicitations are sent to the solicited-node
address, a multicast address. The code after this check was never run.
2) The neighbor table lookup used the IPv6 header destination, which is the
solicited node address, rather than the target address from the
neighbor solicitation. So neighbor lookups would always fail if it
got this far. Also for L3MISSes.
3) The code calls ndisc_send_na(), which does a send on the tunnel device.
The context for neigh_reduce() is the transmit path, vxlan_xmit(),
where the host or a bridge-attached neighbor is trying to transmit
a neighbor solicitation. To respond to it, the tunnel endpoint needs
to do a *receive* of the appropriate neighbor advertisement. Doing a
send, would only try to send the advertisement, encapsulated, to the
remote destinations in the fdb -- hosts that definitely did not do the
corresponding solicitation.
4) The code uses the tunnel endpoint IPv6 forwarding flag to determine the
isrouter flag in the advertisement. This has nothing to do with whether
or not the target is a router, and generally won't be set since the
tunnel endpoint is bridging, not routing, traffic.

The patch below creates a proxy neighbor advertisement to respond to
neighbor solicitions as intended, providing proper IPv6 support for neighbor
reduction.

Signed-off-by: David L Stevens <***@us.ibm.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/net/vxlan.c | 127 ++++++++++++++++++++++++++++++++++++++++++++++------
1 file changed, 113 insertions(+), 14 deletions(-)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 020fe03f37c0..6c0d1c103286 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -1236,15 +1236,103 @@ out:
}

#if IS_ENABLED(CONFIG_IPV6)
+
+static struct sk_buff *vxlan_na_create(struct sk_buff *request,
+ struct neighbour *n, bool isrouter)
+{
+ struct net_device *dev = request->dev;
+ struct sk_buff *reply;
+ struct nd_msg *ns, *na;
+ struct ipv6hdr *pip6;
+ u8 *daddr;
+ int na_olen = 8; /* opt hdr + ETH_ALEN for target */
+ int ns_olen;
+ int i, len;
+
+ if (dev == NULL)
+ return NULL;
+
+ len = LL_RESERVED_SPACE(dev) + sizeof(struct ipv6hdr) +
+ sizeof(*na) + na_olen + dev->needed_tailroom;
+ reply = alloc_skb(len, GFP_ATOMIC);
+ if (reply == NULL)
+ return NULL;
+
+ reply->protocol = htons(ETH_P_IPV6);
+ reply->dev = dev;
+ skb_reserve(reply, LL_RESERVED_SPACE(request->dev));
+ skb_push(reply, sizeof(struct ethhdr));
+ skb_set_mac_header(reply, 0);
+
+ ns = (struct nd_msg *)skb_transport_header(request);
+
+ daddr = eth_hdr(request)->h_source;
+ ns_olen = request->len - skb_transport_offset(request) - sizeof(*ns);
+ for (i = 0; i < ns_olen-1; i += (ns->opt[i+1]<<3)) {
+ if (ns->opt[i] == ND_OPT_SOURCE_LL_ADDR) {
+ daddr = ns->opt + i + sizeof(struct nd_opt_hdr);
+ break;
+ }
+ }
+
+ /* Ethernet header */
+ memcpy(eth_hdr(reply)->h_dest, daddr, ETH_ALEN);
+ memcpy(eth_hdr(reply)->h_source, n->ha, ETH_ALEN);
+ eth_hdr(reply)->h_proto = htons(ETH_P_IPV6);
+ reply->protocol = htons(ETH_P_IPV6);
+
+ skb_pull(reply, sizeof(struct ethhdr));
+ skb_set_network_header(reply, 0);
+ skb_put(reply, sizeof(struct ipv6hdr));
+
+ /* IPv6 header */
+
+ pip6 = ipv6_hdr(reply);
+ memset(pip6, 0, sizeof(struct ipv6hdr));
+ pip6->version = 6;
+ pip6->priority = ipv6_hdr(request)->priority;
+ pip6->nexthdr = IPPROTO_ICMPV6;
+ pip6->hop_limit = 255;
+ pip6->daddr = ipv6_hdr(request)->saddr;
+ pip6->saddr = *(struct in6_addr *)n->primary_key;
+
+ skb_pull(reply, sizeof(struct ipv6hdr));
+ skb_set_transport_header(reply, 0);
+
+ na = (struct nd_msg *)skb_put(reply, sizeof(*na) + na_olen);
+
+ /* Neighbor Advertisement */
+ memset(na, 0, sizeof(*na)+na_olen);
+ na->icmph.icmp6_type = NDISC_NEIGHBOUR_ADVERTISEMENT;
+ na->icmph.icmp6_router = isrouter;
+ na->icmph.icmp6_override = 1;
+ na->icmph.icmp6_solicited = 1;
+ na->target = ns->target;
+ memcpy(&na->opt[2], n->ha, ETH_ALEN);
+ na->opt[0] = ND_OPT_TARGET_LL_ADDR;
+ na->opt[1] = na_olen >> 3;
+
+ na->icmph.icmp6_cksum = csum_ipv6_magic(&pip6->saddr,
+ &pip6->daddr, sizeof(*na)+na_olen, IPPROTO_ICMPV6,
+ csum_partial(na, sizeof(*na)+na_olen, 0));
+
+ pip6->payload_len = htons(sizeof(*na)+na_olen);
+
+ skb_push(reply, sizeof(struct ipv6hdr));
+
+ reply->ip_summed = CHECKSUM_UNNECESSARY;
+
+ return reply;
+}
+
static int neigh_reduce(struct net_device *dev, struct sk_buff *skb)
{
struct vxlan_dev *vxlan = netdev_priv(dev);
- struct neighbour *n;
- union vxlan_addr ipa;
+ struct nd_msg *msg;
const struct ipv6hdr *iphdr;
const struct in6_addr *saddr, *daddr;
- struct nd_msg *msg;
- struct inet6_dev *in6_dev = NULL;
+ struct neighbour *n;
+ struct inet6_dev *in6_dev;

in6_dev = __in6_dev_get(dev);
if (!in6_dev)
@@ -1257,19 +1345,20 @@ static int neigh_reduce(struct net_device *dev, struct sk_buff *skb)
saddr = &iphdr->saddr;
daddr = &iphdr->daddr;

- if (ipv6_addr_loopback(daddr) ||
- ipv6_addr_is_multicast(daddr))
- goto out;
-
msg = (struct nd_msg *)skb_transport_header(skb);
if (msg->icmph.icmp6_code != 0 ||
msg->icmph.icmp6_type != NDISC_NEIGHBOUR_SOLICITATION)
goto out;

- n = neigh_lookup(ipv6_stub->nd_tbl, daddr, dev);
+ if (ipv6_addr_loopback(daddr) ||
+ ipv6_addr_is_multicast(&msg->target))
+ goto out;
+
+ n = neigh_lookup(ipv6_stub->nd_tbl, &msg->target, dev);

if (n) {
struct vxlan_fdb *f;
+ struct sk_buff *reply;

if (!(n->nud_state & NUD_CONNECTED)) {
neigh_release(n);
@@ -1283,13 +1372,23 @@ static int neigh_reduce(struct net_device *dev, struct sk_buff *skb)
goto out;
}

- ipv6_stub->ndisc_send_na(dev, n, saddr, &msg->target,
- !!in6_dev->cnf.forwarding,
- true, false, false);
+ reply = vxlan_na_create(skb, n,
+ !!(f ? f->flags & NTF_ROUTER : 0));
+
neigh_release(n);
+
+ if (reply == NULL)
+ goto out;
+
+ if (netif_rx_ni(reply) == NET_RX_DROP)
+ dev->stats.rx_dropped++;
+
} else if (vxlan->flags & VXLAN_F_L3MISS) {
- ipa.sin6.sin6_addr = *daddr;
- ipa.sa.sa_family = AF_INET6;
+ union vxlan_addr ipa = {
+ .sin6.sin6_addr = msg->target,
+ .sa.sa_family = AF_INET6,
+ };
+
vxlan_ip_miss(dev, &ipa);
}
--
1.9.2
Jiri Slaby
2014-04-18 09:22:23 UTC
Permalink
From: Nicolas Dichtel <***@6wind.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit 1c104a6bebf3c16b6248408b84f91d09ac8a26b6 ]

Commit 3ff661c38c84 ("net: rtnetlink notify events for FDB NTF_SELF adds and
deletes") reuses the function nlmsg_populate_fdb_fill() to notify fdb events.
But this function was used only for dump and thus was always setting the
flag NLM_F_MULTI, which is wrong in case of a single notification.

Libraries like libnl will wait forever for NLMSG_DONE.

CC: Thomas Graf <***@suug.ch>
Signed-off-by: Nicolas Dichtel <***@6wind.com>
Acked-by: Thomas Graf <***@suug.ch>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/core/rtnetlink.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 2a0e21de3060..37b492eaa4f8 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -2014,12 +2014,13 @@ EXPORT_SYMBOL(rtmsg_ifinfo);
static int nlmsg_populate_fdb_fill(struct sk_buff *skb,
struct net_device *dev,
u8 *addr, u32 pid, u32 seq,
- int type, unsigned int flags)
+ int type, unsigned int flags,
+ int nlflags)
{
struct nlmsghdr *nlh;
struct ndmsg *ndm;

- nlh = nlmsg_put(skb, pid, seq, type, sizeof(*ndm), NLM_F_MULTI);
+ nlh = nlmsg_put(skb, pid, seq, type, sizeof(*ndm), nlflags);
if (!nlh)
return -EMSGSIZE;

@@ -2057,7 +2058,7 @@ static void rtnl_fdb_notify(struct net_device *dev, u8 *addr, int type)
if (!skb)
goto errout;

- err = nlmsg_populate_fdb_fill(skb, dev, addr, 0, 0, type, NTF_SELF);
+ err = nlmsg_populate_fdb_fill(skb, dev, addr, 0, 0, type, NTF_SELF, 0);
if (err < 0) {
kfree_skb(skb);
goto errout;
@@ -2282,7 +2283,8 @@ static int nlmsg_populate_fdb(struct sk_buff *skb,

err = nlmsg_populate_fdb_fill(skb, dev, ha->addr,
portid, seq,
- RTM_NEWNEIGH, NTF_SELF);
+ RTM_NEWNEIGH, NTF_SELF,
+ NLM_F_MULTI);
if (err < 0)
return err;
skip:
--
1.9.2
Jiri Slaby
2014-04-18 09:22:09 UTC
Permalink
From: Michael Chan <***@broadcom.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit a8d9bc2e9f5d1c5a25e33cec096d2a1652d3fd52 ]

The pci shutdown handler added in:

bnx2: Add pci shutdown handler
commit 25bfb1dd4ba3b2d9a49ce9d9b0cd7be1840e15ed

created a shutdown down sequence without chip reset if the device was
never brought up. This can cause the firmware to shutdown the PHY
prematurely and cause MMIO read cycles to be unresponsive. On some
systems, it may generate NMI in the bnx2's pci shutdown handler.

The fix is to tell the firmware not to shutdown the PHY if there was
no prior chip reset.

Signed-off-by: Michael Chan <***@broadcom.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/net/ethernet/broadcom/bnx2.c | 37 ++++++++++++++++++++++++++++++++----
drivers/net/ethernet/broadcom/bnx2.h | 5 +++++
2 files changed, 38 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index e838a3f74b69..8f9e76d2dd8b 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -2490,6 +2490,7 @@ bnx2_fw_sync(struct bnx2 *bp, u32 msg_data, int ack, int silent)

bp->fw_wr_seq++;
msg_data |= bp->fw_wr_seq;
+ bp->fw_last_msg = msg_data;

bnx2_shmem_wr(bp, BNX2_DRV_MB, msg_data);

@@ -3982,8 +3983,23 @@ bnx2_setup_wol(struct bnx2 *bp)
wol_msg = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL;
}

- if (!(bp->flags & BNX2_FLAG_NO_WOL))
- bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT3 | wol_msg, 1, 0);
+ if (!(bp->flags & BNX2_FLAG_NO_WOL)) {
+ u32 val;
+
+ wol_msg |= BNX2_DRV_MSG_DATA_WAIT3;
+ if (bp->fw_last_msg || BNX2_CHIP(bp) != BNX2_CHIP_5709) {
+ bnx2_fw_sync(bp, wol_msg, 1, 0);
+ return;
+ }
+ /* Tell firmware not to power down the PHY yet, otherwise
+ * the chip will take a long time to respond to MMIO reads.
+ */
+ val = bnx2_shmem_rd(bp, BNX2_PORT_FEATURE);
+ bnx2_shmem_wr(bp, BNX2_PORT_FEATURE,
+ val | BNX2_PORT_FEATURE_ASF_ENABLED);
+ bnx2_fw_sync(bp, wol_msg, 1, 0);
+ bnx2_shmem_wr(bp, BNX2_PORT_FEATURE, val);
+ }

}

@@ -4015,9 +4031,22 @@ bnx2_set_power_state(struct bnx2 *bp, pci_power_t state)

if (bp->wol)
pci_set_power_state(bp->pdev, PCI_D3hot);
- } else {
- pci_set_power_state(bp->pdev, PCI_D3hot);
+ break;
+
+ }
+ if (!bp->fw_last_msg && BNX2_CHIP(bp) == BNX2_CHIP_5709) {
+ u32 val;
+
+ /* Tell firmware not to power down the PHY yet,
+ * otherwise the other port may not respond to
+ * MMIO reads.
+ */
+ val = bnx2_shmem_rd(bp, BNX2_BC_STATE_CONDITION);
+ val &= ~BNX2_CONDITION_PM_STATE_MASK;
+ val |= BNX2_CONDITION_PM_STATE_UNPREP;
+ bnx2_shmem_wr(bp, BNX2_BC_STATE_CONDITION, val);
}
+ pci_set_power_state(bp->pdev, PCI_D3hot);

/* No more memory access after this point until
* device is brought back to D0.
diff --git a/drivers/net/ethernet/broadcom/bnx2.h b/drivers/net/ethernet/broadcom/bnx2.h
index 18cb2d23e56b..0eb2a65c35b4 100644
--- a/drivers/net/ethernet/broadcom/bnx2.h
+++ b/drivers/net/ethernet/broadcom/bnx2.h
@@ -6890,6 +6890,7 @@ struct bnx2 {

u16 fw_wr_seq;
u16 fw_drv_pulse_wr_seq;
+ u32 fw_last_msg;

int rx_max_ring;
int rx_ring_size;
@@ -7396,6 +7397,10 @@ struct bnx2_rv2p_fw_file {
#define BNX2_CONDITION_MFW_RUN_NCSI 0x00006000
#define BNX2_CONDITION_MFW_RUN_NONE 0x0000e000
#define BNX2_CONDITION_MFW_RUN_MASK 0x0000e000
+#define BNX2_CONDITION_PM_STATE_MASK 0x00030000
+#define BNX2_CONDITION_PM_STATE_FULL 0x00030000
+#define BNX2_CONDITION_PM_STATE_PREP 0x00020000
+#define BNX2_CONDITION_PM_STATE_UNPREP 0x00010000

#define BNX2_BC_STATE_DEBUG_CMD 0x1dc
#define BNX2_BC_STATE_BC_DBG_CMD_SIGNATURE 0x42440000
--
1.9.2
Jiri Slaby
2014-04-18 09:22:19 UTC
Permalink
From: lucien <***@gmail.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit e367c2d03dba4c9bcafad24688fadb79dd95b218 ]

In ip6_append_data_mtu(), when the xfrm mode is not tunnel(such as
transport),the ipsec header need to be added in the first fragment, so the mtu
will decrease to reserve space for it, then the second fragment come, the mtu
should be turn back, as the commit 0c1833797a5a6ec23ea9261d979aa18078720b74
said. however, in the commit a493e60ac4bbe2e977e7129d6d8cbb0dd236be, it use
*mtu = min(*mtu, ...) to change the mtu, which lead to the new mtu is alway
equal with the first fragment's. and cannot turn back.

when I test through ping6 -c1 -s5000 $ip (mtu=1280):
...frag (0|1232) ESP(spi=0x00002000,seq=0xb), length 1232
...frag (1232|1216)
...frag (2448|1216)
...frag (3664|1216)
...frag (4880|164)

which should be:
...frag (0|1232) ESP(spi=0x00001000,seq=0x1), length 1232
...frag (1232|1232)
...frag (2464|1232)
...frag (3696|1232)
...frag (4928|116)

so delete the min() when change back the mtu.

Signed-off-by: Xin Long <***@gmail.com>
Fixes: 75a493e60ac4bb ("ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size")
Acked-by: Hannes Frederic Sowa <***@stressinduktion.org>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/ipv6/ip6_output.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 68fd4918315c..49f85d49cdb4 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1088,21 +1088,19 @@ static void ip6_append_data_mtu(unsigned int *mtu,
unsigned int fragheaderlen,
struct sk_buff *skb,
struct rt6_info *rt,
- bool pmtuprobe)
+ unsigned int orig_mtu)
{
if (!(rt->dst.flags & DST_XFRM_TUNNEL)) {
if (skb == NULL) {
/* first fragment, reserve header_len */
- *mtu = *mtu - rt->dst.header_len;
+ *mtu = orig_mtu - rt->dst.header_len;

} else {
/*
* this fragment is not first, the headers
* space is regarded as data space.
*/
- *mtu = min(*mtu, pmtuprobe ?
- rt->dst.dev->mtu :
- dst_mtu(rt->dst.path));
+ *mtu = orig_mtu;
}
*maxfraglen = ((*mtu - fragheaderlen) & ~7)
+ fragheaderlen - sizeof(struct frag_hdr);
@@ -1119,7 +1117,7 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
struct ipv6_pinfo *np = inet6_sk(sk);
struct inet_cork *cork;
struct sk_buff *skb, *skb_prev = NULL;
- unsigned int maxfraglen, fragheaderlen, mtu;
+ unsigned int maxfraglen, fragheaderlen, mtu, orig_mtu;
int exthdrlen;
int dst_exthdrlen;
int hh_len;
@@ -1201,6 +1199,7 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
dst_exthdrlen = 0;
mtu = cork->fragsize;
}
+ orig_mtu = mtu;

hh_len = LL_RESERVED_SPACE(rt->dst.dev);

@@ -1280,8 +1279,7 @@ alloc_new_skb:
if (skb == NULL || skb_prev == NULL)
ip6_append_data_mtu(&mtu, &maxfraglen,
fragheaderlen, skb, rt,
- np->pmtudisc ==
- IPV6_PMTUDISC_PROBE);
+ orig_mtu);

skb_prev = skb;
--
1.9.2
Jiri Slaby
2014-04-18 09:22:20 UTC
Permalink
From: David Stevens <***@us.ibm.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit 7346135dcd3f9b57f30a5512094848c678d7143e ]

This patch fixes a NULL pointer dereference in the event of an
skb allocation failure in arp_reduce().

Signed-Off-By: David L Stevens <***@us.ibm.com>
Acked-by: Cong Wang <***@twopensource.com>

Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/net/vxlan.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 32c45c3d820d..020fe03f37c0 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -1212,6 +1212,9 @@ static int arp_reduce(struct net_device *dev, struct sk_buff *skb)

neigh_release(n);

+ if (reply == NULL)
+ goto out;
+
skb_reset_mac_header(reply);
__skb_pull(reply, skb_network_offset(reply));
reply->ip_summed = CHECKSUM_UNNECESSARY;
--
1.9.2
Jiri Slaby
2014-04-18 09:22:17 UTC
Permalink
From: Stefan Wahren <***@i2se.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit 84fe61821e4ebab6322eeae3f3c27f77f0031978 ]

If the Freescale fec is in promiscuous mode and network cable is
reconnected then the promiscuous mode get lost. The problem is caused
by a too soon call of set_multicast_list to re-enable promisc mode.
The FEC_R_CNTRL register changes are overwritten by fec_restart.

This patch fixes this by moving the call behind the init of FEC_R_CNTRL
register in fec_restart.

Successful tested on a i.MX28 board.

Signed-off-by: Stefan Wahren <***@i2se.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/net/ethernet/freescale/fec_main.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 63090c0ddeb9..8672547a2a47 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -525,13 +525,6 @@ fec_restart(struct net_device *ndev, int duplex)
/* Clear any outstanding interrupt. */
writel(0xffc00000, fep->hwp + FEC_IEVENT);

- /* Setup multicast filter. */
- set_multicast_list(ndev);
-#ifndef CONFIG_M5272
- writel(0, fep->hwp + FEC_HASH_TABLE_HIGH);
- writel(0, fep->hwp + FEC_HASH_TABLE_LOW);
-#endif
-
/* Set maximum receive buffer size. */
writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE);

@@ -652,6 +645,13 @@ fec_restart(struct net_device *ndev, int duplex)

writel(rcntl, fep->hwp + FEC_R_CNTRL);

+ /* Setup multicast filter. */
+ set_multicast_list(ndev);
+#ifndef CONFIG_M5272
+ writel(0, fep->hwp + FEC_HASH_TABLE_HIGH);
+ writel(0, fep->hwp + FEC_HASH_TABLE_LOW);
+#endif
+
if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
/* enable ENET endian swap */
ecntl |= (1 << 8);
--
1.9.2
Jiri Slaby
2014-04-18 09:22:16 UTC
Permalink
From: dingtianhong <***@huawei.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit fb00bc2e6cd2046282ba4b03f4fe682aee70b2f8 ]

The commit d3ab3ffd1d728d7ee77340e7e7e2c7cfe6a4013e
(bonding: use rlb_client_info->vlan_id instead of ->tag)
remove the rlb_client_info->tag, but occur some issues,
The vlan_get_tag() will return 0 for success and -EINVAL for
error, so the client_info->vlan_id always be set to 0 if the
vlan_get_tag return 0 for success, so the client_info would
never get a correct vlan id.

We should only set the vlan id to 0 when the vlan_get_tag return error.

Fixes: d3ab3ffd1d7 (bonding: use rlb_client_info->vlan_id instead of ->tag)

CC: Ding Tianhong <***@huawei.com>
CC: Jay Vosburgh <***@us.ibm.com>
CC: Andy Gospodarek <***@greyhouse.net>
Signed-off-by: Ding Tianhong <***@huawei.com>
Acked-by: Veaceslav Falico <***@redhat.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/net/bonding/bond_alb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index f428ef574372..71adb692e457 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -694,7 +694,7 @@ static struct slave *rlb_choose_channel(struct sk_buff *skb, struct bonding *bon
client_info->ntt = 0;
}

- if (!vlan_get_tag(skb, &client_info->vlan_id))
+ if (vlan_get_tag(skb, &client_info->vlan_id))
client_info->vlan_id = 0;

if (!client_info->assigned) {
--
1.9.2
Jiri Slaby
2014-04-18 09:22:18 UTC
Permalink
From: Heiner Kallweit <***@web.de>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit ecab67015ef6e3f3635551dcc9971cf363cc1cd5 ]

tmp_prefered_lft is an offset to ifp->tstamp, not now. Therefore
age needs to be added to the condition.

Age calculation in ipv6_create_tempaddr is different from the one
in addrconf_verify and doesn't consider ADDRCONF_TIMER_FUZZ_MINUS.
This can cause age in ipv6_create_tempaddr to be less than the one
in addrconf_verify and therefore unnecessary temporary address to
be generated.
Use age calculation as in addrconf_modify to avoid this.

Signed-off-by: Heiner Kallweit <***@web.de>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/ipv6/addrconf.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index cd3fb301da38..5dac9fd72465 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1079,8 +1079,11 @@ retry:
* Lifetime is greater than REGEN_ADVANCE time units. In particular,
* an implementation must not create a temporary address with a zero
* Preferred Lifetime.
+ * Use age calculation as in addrconf_verify to avoid unnecessary
+ * temporary addresses being generated.
*/
- if (tmp_prefered_lft <= regen_advance) {
+ age = (now - tmp_tstamp + ADDRCONF_TIMER_FUZZ_MINUS) / HZ;
+ if (tmp_prefered_lft <= regen_advance + age) {
in6_ifa_put(ifp);
in6_dev_put(idev);
ret = -1;
--
1.9.2
Jiri Slaby
2014-04-18 09:22:12 UTC
Permalink
From: Eric Dumazet <***@gmail.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit c3f9b01849ef3bc69024990092b9f42e20df7797 ]

Lars Persson reported following deadlock :

-000 |M:0x0:0x802B6AF8(asm) <-- arch_spin_lock
-001 |tcp_v4_rcv(skb = 0x8BD527A0) <-- sk = 0x8BE6B2A0
-002 |ip_local_deliver_finish(skb = 0x8BD527A0)
-003 |__netif_receive_skb_core(skb = 0x8BD527A0, ?)
-004 |netif_receive_skb(skb = 0x8BD527A0)
-005 |elk_poll(napi = 0x8C770500, budget = 64)
-006 |net_rx_action(?)
-007 |__do_softirq()
-008 |do_softirq()
-009 |local_bh_enable()
-010 |tcp_rcv_established(sk = 0x8BE6B2A0, skb = 0x87D3A9E0, th = 0x814EBE14, ?)
-011 |tcp_v4_do_rcv(sk = 0x8BE6B2A0, skb = 0x87D3A9E0)
-012 |tcp_delack_timer_handler(sk = 0x8BE6B2A0)
-013 |tcp_release_cb(sk = 0x8BE6B2A0)
-014 |release_sock(sk = 0x8BE6B2A0)
-015 |tcp_sendmsg(?, sk = 0x8BE6B2A0, ?, ?)
-016 |sock_sendmsg(sock = 0x8518C4C0, msg = 0x87D8DAA8, size = 4096)
-017 |kernel_sendmsg(?, ?, ?, ?, size = 4096)
-018 |smb_send_kvec()
-019 |smb_send_rqst(server = 0x87C4D400, rqst = 0x87D8DBA0)
-020 |cifs_call_async()
-021 |cifs_async_writev(wdata = 0x87FD6580)
-022 |cifs_writepages(mapping = 0x852096E4, wbc = 0x87D8DC88)
-023 |__writeback_single_inode(inode = 0x852095D0, wbc = 0x87D8DC88)
-024 |writeback_sb_inodes(sb = 0x87D6D800, wb = 0x87E4A9C0, work = 0x87D8DD88)
-025 |__writeback_inodes_wb(wb = 0x87E4A9C0, work = 0x87D8DD88)
-026 |wb_writeback(wb = 0x87E4A9C0, work = 0x87D8DD88)
-027 |wb_do_writeback(wb = 0x87E4A9C0, force_wait = 0)
-028 |bdi_writeback_workfn(work = 0x87E4A9CC)
-029 |process_one_work(worker = 0x8B045880, work = 0x87E4A9CC)
-030 |worker_thread(__worker = 0x8B045880)
-031 |kthread(_create = 0x87CADD90)
-032 |ret_from_kernel_thread(asm)

Bug occurs because __tcp_checksum_complete_user() enables BH, assuming
it is running from softirq context.

Lars trace involved a NIC without RX checksum support but other points
are problematic as well, like the prequeue stuff.

Problem is triggered by a timer, that found socket being owned by user.

tcp_release_cb() should call tcp_write_timer_handler() or
tcp_delack_timer_handler() in the appropriate context :

BH disabled and socket lock held, but 'owned' field cleared,
as if they were running from timer handlers.

Fixes: 6f458dfb4092 ("tcp: improve latencies of timer triggered events")
Reported-by: Lars Persson <***@axis.com>
Tested-by: Lars Persson <***@axis.com>
Signed-off-by: Eric Dumazet <***@google.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
include/net/sock.h | 5 +++++
net/core/sock.c | 5 ++++-
net/ipv4/tcp_output.c | 11 +++++++++++
3 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/include/net/sock.h b/include/net/sock.h
index 808cbc2ec6c1..6e2c4901a477 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -1459,6 +1459,11 @@ static inline void sk_wmem_free_skb(struct sock *sk, struct sk_buff *skb)
*/
#define sock_owned_by_user(sk) ((sk)->sk_lock.owned)

+static inline void sock_release_ownership(struct sock *sk)
+{
+ sk->sk_lock.owned = 0;
+}
+
/*
* Macro so as to not evaluate some arguments when
* lockdep is not enabled.
diff --git a/net/core/sock.c b/net/core/sock.c
index 831a0d0af49f..ec228a30e7dc 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -2359,10 +2359,13 @@ void release_sock(struct sock *sk)
if (sk->sk_backlog.tail)
__release_sock(sk);

+ /* Warning : release_cb() might need to release sk ownership,
+ * ie call sock_release_ownership(sk) before us.
+ */
if (sk->sk_prot->release_cb)
sk->sk_prot->release_cb(sk);

- sk->sk_lock.owned = 0;
+ sock_release_ownership(sk);
if (waitqueue_active(&sk->sk_lock.wq))
wake_up(&sk->sk_lock.wq);
spin_unlock_bh(&sk->sk_lock.slock);
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index e088932bcfae..826fc6fab576 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -765,6 +765,17 @@ void tcp_release_cb(struct sock *sk)
if (flags & (1UL << TCP_TSQ_DEFERRED))
tcp_tsq_handler(sk);

+ /* Here begins the tricky part :
+ * We are called from release_sock() with :
+ * 1) BH disabled
+ * 2) sk_lock.slock spinlock held
+ * 3) socket owned by us (sk->sk_lock.owned == 1)
+ *
+ * But following code is meant to be called from BH handlers,
+ * so we should keep BH disabled, but early release socket ownership
+ */
+ sock_release_ownership(sk);
+
if (flags & (1UL << TCP_WRITE_TIMER_DEFERRED)) {
tcp_write_timer_handler(sk);
__sock_put(sk);
--
1.9.2
Jiri Slaby
2014-04-18 09:22:10 UTC
Permalink
From: Eric Dumazet <***@google.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit 2d8d40afd187bced0a3d056366fb58d66fe845e3 ]

Resizing fq hash table allocates memory while holding qdisc spinlock,
with BH disabled.

This is definitely not good, as allocation might sleep.

We can drop the lock and get it when needed, we hold RTNL so no other
changes can happen at the same time.

Signed-off-by: Eric Dumazet <***@google.com>
Fixes: afe4fd062416 ("pkt_sched: fq: Fair Queue packet scheduler")
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/sched/sch_fq.c | 28 +++++++++++++++++++---------
1 file changed, 19 insertions(+), 9 deletions(-)

diff --git a/net/sched/sch_fq.c b/net/sched/sch_fq.c
index 2e55f8189502..52229f91b115 100644
--- a/net/sched/sch_fq.c
+++ b/net/sched/sch_fq.c
@@ -577,9 +577,11 @@ static void fq_rehash(struct fq_sched_data *q,
q->stat_gc_flows += fcnt;
}

-static int fq_resize(struct fq_sched_data *q, u32 log)
+static int fq_resize(struct Qdisc *sch, u32 log)
{
+ struct fq_sched_data *q = qdisc_priv(sch);
struct rb_root *array;
+ void *old_fq_root;
u32 idx;

if (q->fq_root && log == q->fq_trees_log)
@@ -592,13 +594,19 @@ static int fq_resize(struct fq_sched_data *q, u32 log)
for (idx = 0; idx < (1U << log); idx++)
array[idx] = RB_ROOT;

- if (q->fq_root) {
- fq_rehash(q, q->fq_root, q->fq_trees_log, array, log);
- kfree(q->fq_root);
- }
+ sch_tree_lock(sch);
+
+ old_fq_root = q->fq_root;
+ if (old_fq_root)
+ fq_rehash(q, old_fq_root, q->fq_trees_log, array, log);
+
q->fq_root = array;
q->fq_trees_log = log;

+ sch_tree_unlock(sch);
+
+ kfree(old_fq_root);
+
return 0;
}

@@ -674,9 +682,11 @@ static int fq_change(struct Qdisc *sch, struct nlattr *opt)
q->flow_refill_delay = usecs_to_jiffies(usecs_delay);
}

- if (!err)
- err = fq_resize(q, fq_log);
-
+ if (!err) {
+ sch_tree_unlock(sch);
+ err = fq_resize(sch, fq_log);
+ sch_tree_lock(sch);
+ }
while (sch->q.qlen > sch->limit) {
struct sk_buff *skb = fq_dequeue(sch);

@@ -722,7 +732,7 @@ static int fq_init(struct Qdisc *sch, struct nlattr *opt)
if (opt)
err = fq_change(sch, opt);
else
- err = fq_resize(q, q->fq_trees_log);
+ err = fq_resize(sch, q->fq_trees_log);

return err;
}
--
1.9.2
Jiri Slaby
2014-04-18 09:22:13 UTC
Permalink
=46rom: Linus L=C3=BCssing <***@web.de>

3.12-stable review patch. If anyone has any objections, please let me =
know.

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

[ Upstream commit 9ed973cc40c588abeaa58aea0683ea665132d11d ]

General IGMP and MLD queries are supposed to have the multicast
link-local all-nodes address as their destination according to RFC2236
section 9, RFC3376 section 4.1.12/9.1, RFC2710 section 8 and RFC3810
section 5.1.15.

Without this check, such malformed IGMP/MLD queries can result in a
denial of service: The queries are ignored by most IGMP/MLD listeners
therefore they will not respond with an IGMP/MLD report. However,
without this patch these malformed MLD queries would enable the
snooping part in the bridge code, potentially shutting down the
according ports towards these hosts for multicast traffic as the
bridge did not learn about these listeners.

Reported-by: Jan Stancek <***@redhat.com>
Signed-off-by: Linus L=C3=BCssing <***@web.de>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/bridge/br_multicast.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)

diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
index b98627e902e7..4af88e2a33c4 100644
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -1183,6 +1183,14 @@ static int br_ip4_multicast_query(struct net_bri=
dge *br,
IGMPV3_MRC(ih3->code) * (HZ / IGMP_TIMER_SCALE) : 1;
}
=20
+ /* RFC2236+RFC3376 (IGMPv2+IGMPv3) require the multicast link layer
+ * all-systems destination addresses (224.0.0.1) for general queries
+ */
+ if (!group && iph->daddr !=3D htonl(INADDR_ALLHOSTS_GROUP)) {
+ err =3D -EINVAL;
+ goto out;
+ }
+
br_multicast_query_received(br, port, &br->ip4_querier, !!iph->saddr,
max_delay);
=20
@@ -1230,6 +1238,7 @@ static int br_ip6_multicast_query(struct net_brid=
ge *br,
unsigned long max_delay;
unsigned long now =3D jiffies;
const struct in6_addr *group =3D NULL;
+ bool is_general_query;
int err =3D 0;
u16 vid =3D 0;
=20
@@ -1265,6 +1274,16 @@ static int br_ip6_multicast_query(struct net_bri=
dge *br,
max_delay =3D max(msecs_to_jiffies(mldv2_mrc(mld2q)), 1UL);
}
=20
+ is_general_query =3D group && ipv6_addr_any(group);
+
+ /* RFC2710+RFC3810 (MLDv1+MLDv2) require the multicast link layer
+ * all-nodes destination address (ff02::1) for general queries
+ */
+ if (is_general_query && !ipv6_addr_is_ll_all_nodes(&ip6h->daddr)) {
+ err =3D -EINVAL;
+ goto out;
+ }
+
br_multicast_query_received(br, port, &br->ip6_querier,
!ipv6_addr_any(&ip6h->saddr), max_delay);
=20
--=20
1.9.2
Jiri Slaby
2014-04-18 09:22:14 UTC
Permalink
=46rom: Linus L=C3=BCssing <***@web.de>

3.12-stable review patch. If anyone has any objections, please let me =
know.

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

[ Upstream commit 20a599bec95a52fa72432b2376a2ce47c5bb68fb ]

Without this check someone could easily create a denial of service
by injecting multicast-specific queries to enable the bridge
snooping part if no real querier issuing periodic general queries
is present on the link which would result in the bridge wrongly
shutting down ports for multicast traffic as the bridge did not learn
about these listeners.

With this patch the snooping code is enabled upon receiving valid,
general queries only.

Signed-off-by: Linus L=C3=BCssing <***@web.de>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/bridge/br_multicast.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
index 4af88e2a33c4..162d6c78ad05 100644
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -1129,9 +1129,10 @@ static void br_multicast_query_received(struct n=
et_bridge *br,
struct net_bridge_port *port,
struct bridge_mcast_querier *querier,
int saddr,
+ bool is_general_query,
unsigned long max_delay)
{
- if (saddr)
+ if (saddr && is_general_query)
br_multicast_update_querier_timer(br, querier, max_delay);
else if (timer_pending(&querier->timer))
return;
@@ -1192,7 +1193,7 @@ static int br_ip4_multicast_query(struct net_brid=
ge *br,
}
=20
br_multicast_query_received(br, port, &br->ip4_querier, !!iph->saddr,
- max_delay);
+ !group, max_delay);
=20
if (!group)
goto out;
@@ -1285,7 +1286,8 @@ static int br_ip6_multicast_query(struct net_brid=
ge *br,
}
=20
br_multicast_query_received(br, port, &br->ip6_querier,
- !ipv6_addr_any(&ip6h->saddr), max_delay);
+ !ipv6_addr_any(&ip6h->saddr),
+ is_general_query, max_delay);
=20
if (!group)
goto out;
--=20
1.9.2
Jiri Slaby
2014-04-18 09:22:06 UTC
Permalink
From: Eric Dumazet <***@google.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit de1443916791d75fdd26becb116898277bb0273f ]

Some applications didn't expect recvmsg() on a non blocking socket
could return -EINTR. This possibility was added as a side effect
of commit b3ca9b02b00704 ("net: fix multithreaded signal handling in
unix recv routines").

To hit this bug, you need to be a bit unlucky, as the u->readlock
mutex is usually held for very small periods.

Fixes: b3ca9b02b00704 ("net: fix multithreaded signal handling in unix recv routines")
Signed-off-by: Eric Dumazet <***@google.com>
Cc: Rainer Weikusat <***@mobileactivedefense.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/unix/af_unix.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index d7c1ac621a90..c3975bcf725f 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1785,8 +1785,11 @@ static int unix_dgram_recvmsg(struct kiocb *iocb, struct socket *sock,
goto out;

err = mutex_lock_interruptible(&u->readlock);
- if (err) {
- err = sock_intr_errno(sock_rcvtimeo(sk, noblock));
+ if (unlikely(err)) {
+ /* recvmsg() in non blocking mode is supposed to return -EAGAIN
+ * sk_rcvtimeo is not honored by mutex_lock_interruptible()
+ */
+ err = noblock ? -EAGAIN : -ERESTARTSYS;
goto out;
}

@@ -1911,6 +1914,7 @@ static int unix_stream_recvmsg(struct kiocb *iocb, struct socket *sock,
struct unix_sock *u = unix_sk(sk);
struct sockaddr_un *sunaddr = msg->msg_name;
int copied = 0;
+ int noblock = flags & MSG_DONTWAIT;
int check_creds = 0;
int target;
int err = 0;
@@ -1926,7 +1930,7 @@ static int unix_stream_recvmsg(struct kiocb *iocb, struct socket *sock,
goto out;

target = sock_rcvlowat(sk, flags&MSG_WAITALL, size);
- timeo = sock_rcvtimeo(sk, flags&MSG_DONTWAIT);
+ timeo = sock_rcvtimeo(sk, noblock);

/* Lock the socket to prevent queue disordering
* while sleeps in memcpy_tomsg
@@ -1938,8 +1942,11 @@ static int unix_stream_recvmsg(struct kiocb *iocb, struct socket *sock,
}

err = mutex_lock_interruptible(&u->readlock);
- if (err) {
- err = sock_intr_errno(timeo);
+ if (unlikely(err)) {
+ /* recvmsg() in non blocking mode is supposed to return -EAGAIN
+ * sk_rcvtimeo is not honored by mutex_lock_interruptible()
+ */
+ err = noblock ? -EAGAIN : -ERESTARTSYS;
goto out;
}
--
1.9.2
Jiri Slaby
2014-04-18 09:22:11 UTC
Permalink
=46rom: Peter Bostr=C3=B6m <***@netrounds.com>

3.12-stable review patch. If anyone has any objections, please let me =
know.

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

[ Upstream commit dd38743b4cc2f86be250eaf156cf113ba3dd531a ]

With TX VLAN offload enabled the source MAC address for frames sent usi=
ng the
VLAN interface is currently set to the address of the real interface. T=
his is
wrong since the VLAN interface may be configured with a different addre=
ss.

The bug was introduced in commit 2205369a314e12fcec4781cc73ac9c08fc2b47=
de
("vlan: Fix header ops passthru when doing TX VLAN offload.").

This patch sets the source address before calling the create function o=
f the
real interface.

Signed-off-by: Peter Bostr=C3=B6m <***@netrounds.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/8021q/vlan_dev.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index edf44d079da7..dc7d8da441dd 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -557,6 +557,9 @@ static int vlan_passthru_hard_header(struct sk_buff=
*skb, struct net_device *dev
struct vlan_dev_priv *vlan =3D vlan_dev_priv(dev);
struct net_device *real_dev =3D vlan->real_dev;
=20
+ if (saddr =3D=3D NULL)
+ saddr =3D dev->dev_addr;
+
return dev_hard_header(skb, real_dev, type, daddr, saddr, len);
}
=20
--=20
1.9.2
Jiri Slaby
2014-04-18 09:21:35 UTC
Permalink
From: Mikulas Patocka <***@redhat.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit d82b922a4acc1781d368aceac2f9da43b038cab2 upstream.

The powernow-k6 driver used to read the initial multiplier from the
powernow register. However, there is a problem with this:

* If there was a frequency transition before, the multiplier read from the
register corresponds to the current multiplier.
* If there was no frequency transition since reset, the field in the
register always reads as zero, regardless of the current multiplier that
is set using switches on the mainboard and that the CPU is running at.

The zero value corresponds to multiplier 4.5, so as a consequence, the
powernow-k6 driver always assumes multiplier 4.5.

For example, if we have 550MHz CPU with bus frequency 100MHz and
multiplier 5.5, the powernow-k6 driver thinks that the multiplier is 4.5
and bus frequency is 122MHz. The powernow-k6 driver then sets the
multiplier to 4.5, underclocking the CPU to 450MHz, but reports the
current frequency as 550MHz.

There is no reliable way how to read the initial multiplier. I modified
the driver so that it contains a table of known frequencies (based on
parameters of existing CPUs and some common overclocking schemes) and sets
the multiplier according to the frequency. If the frequency is unknown
(because of unusual overclocking or underclocking), the user must supply
the bus speed and maximum multiplier as module parameters.

This patch should be backported to all stable kernels. If it doesn't
apply cleanly, change it, or ask me to change it.

Signed-off-by: Mikulas Patocka <***@redhat.com>
Signed-off-by: Rafael J. Wysocki <***@intel.com>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/cpufreq/powernow-k6.c | 76 ++++++++++++++++++++++++++++++++++++++++---
1 file changed, 72 insertions(+), 4 deletions(-)

diff --git a/drivers/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c
index 9c6a4412eca7..1624188e584f 100644
--- a/drivers/cpufreq/powernow-k6.c
+++ b/drivers/cpufreq/powernow-k6.c
@@ -26,6 +26,14 @@
static unsigned int busfreq; /* FSB, in 10 kHz */
static unsigned int max_multiplier;

+static unsigned int param_busfreq = 0;
+static unsigned int param_max_multiplier = 0;
+
+module_param_named(max_multiplier, param_max_multiplier, uint, S_IRUGO);
+MODULE_PARM_DESC(max_multiplier, "Maximum multiplier (allowed values: 20 30 35 40 45 50 55 60)");
+
+module_param_named(bus_frequency, param_busfreq, uint, S_IRUGO);
+MODULE_PARM_DESC(bus_frequency, "Bus frequency in kHz");

/* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */
static struct cpufreq_frequency_table clock_ratio[] = {
@@ -40,6 +48,27 @@ static struct cpufreq_frequency_table clock_ratio[] = {
{0, CPUFREQ_TABLE_END}
};

+static const struct {
+ unsigned freq;
+ unsigned mult;
+} usual_frequency_table[] = {
+ { 400000, 40 }, // 100 * 4
+ { 450000, 45 }, // 100 * 4.5
+ { 475000, 50 }, // 95 * 5
+ { 500000, 50 }, // 100 * 5
+ { 506250, 45 }, // 112.5 * 4.5
+ { 533500, 55 }, // 97 * 5.5
+ { 550000, 55 }, // 100 * 5.5
+ { 562500, 50 }, // 112.5 * 5
+ { 570000, 60 }, // 95 * 6
+ { 600000, 60 }, // 100 * 6
+ { 618750, 55 }, // 112.5 * 5.5
+ { 660000, 55 }, // 120 * 5.5
+ { 675000, 60 }, // 112.5 * 6
+ { 720000, 60 }, // 120 * 6
+};
+
+#define FREQ_RANGE 3000

/**
* powernow_k6_get_cpu_multiplier - returns the current FSB multiplier
@@ -163,18 +192,57 @@ static int powernow_k6_target(struct cpufreq_policy *policy,
return 0;
}

-
static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
{
unsigned int i, f;
int result;
+ unsigned khz;

if (policy->cpu != 0)
return -ENODEV;

- /* get frequencies */
- max_multiplier = powernow_k6_get_cpu_multiplier();
- busfreq = cpu_khz / max_multiplier;
+ max_multiplier = 0;
+ khz = cpu_khz;
+ for (i = 0; i < ARRAY_SIZE(usual_frequency_table); i++) {
+ if (khz >= usual_frequency_table[i].freq - FREQ_RANGE &&
+ khz <= usual_frequency_table[i].freq + FREQ_RANGE) {
+ khz = usual_frequency_table[i].freq;
+ max_multiplier = usual_frequency_table[i].mult;
+ break;
+ }
+ }
+ if (param_max_multiplier) {
+ for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
+ if (clock_ratio[i].driver_data == param_max_multiplier) {
+ max_multiplier = param_max_multiplier;
+ goto have_max_multiplier;
+ }
+ }
+ printk(KERN_ERR "powernow-k6: invalid max_multiplier parameter, valid parameters 20, 30, 35, 40, 45, 50, 55, 60\n");
+ return -EINVAL;
+ }
+
+ if (!max_multiplier) {
+ printk(KERN_WARNING "powernow-k6: unknown frequency %u, cannot determine current multiplier\n", khz);
+ printk(KERN_WARNING "powernow-k6: use module parameters max_multiplier and bus_frequency\n");
+ return -EOPNOTSUPP;
+ }
+
+have_max_multiplier:
+ param_max_multiplier = max_multiplier;
+
+ if (param_busfreq) {
+ if (param_busfreq >= 50000 && param_busfreq <= 150000) {
+ busfreq = param_busfreq / 10;
+ goto have_busfreq;
+ }
+ printk(KERN_ERR "powernow-k6: invalid bus_frequency parameter, allowed range 50000 - 150000 kHz\n");
+ return -EINVAL;
+ }
+
+ busfreq = khz / max_multiplier;
+have_busfreq:
+ param_busfreq = busfreq * 10;

/* table init */
for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
--
1.9.2
Jiri Slaby
2014-04-18 09:22:07 UTC
Permalink
From: Anton Nayshtut <***@swortex.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit d2d273ffabd315eecefce21a4391d44b6e156b73 ]

Without this fix, ipv6_exthdrs_offload_init doesn't register IPPROTO_DSTOPTS
offload, but returns 0 (as the IPPROTO_ROUTING registration actually succeeds).

This then causes the ipv6_gso_segment to drop IPv6 packets with IPPROTO_DSTOPTS
header.

The issue detected and the fix verified by running MS HCK Offload LSO test on
top of QEMU Windows guests, as this test sends IPv6 packets with
IPPROTO_DSTOPTS.

Signed-off-by: Anton Nayshtut <***@swortex.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/ipv6/exthdrs_offload.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/ipv6/exthdrs_offload.c b/net/ipv6/exthdrs_offload.c
index cf77f3abfd06..447a7fbd1bb6 100644
--- a/net/ipv6/exthdrs_offload.c
+++ b/net/ipv6/exthdrs_offload.c
@@ -25,11 +25,11 @@ int __init ipv6_exthdrs_offload_init(void)
int ret;

ret = inet6_add_offload(&rthdr_offload, IPPROTO_ROUTING);
- if (!ret)
+ if (ret)
goto out;

ret = inet6_add_offload(&dstopt_offload, IPPROTO_DSTOPTS);
- if (!ret)
+ if (ret)
goto out_rt;

out:
--
1.9.2
Jiri Slaby
2014-04-18 09:22:04 UTC
Permalink
From: Erik Hugne <***@ericsson.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit 2892505ea170094f982516bb38105eac45f274b1 ]

Failure to schedule a TIPC tasklet with tipc_k_signal because the
tasklet handler is disabled is not an error. It means TIPC is
currently in the process of shutting down. We remove the error
logging in this case.

Signed-off-by: Erik Hugne <***@ericsson.com>
Reviewed-by: Jon Maloy <***@ericsson.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/tipc/handler.c | 1 -
1 file changed, 1 deletion(-)

diff --git a/net/tipc/handler.c b/net/tipc/handler.c
index b36f0fcd9bdf..79b991e044a9 100644
--- a/net/tipc/handler.c
+++ b/net/tipc/handler.c
@@ -57,7 +57,6 @@ unsigned int tipc_k_signal(Handler routine, unsigned long argument)
struct queue_item *item;

if (!handler_enabled) {
- pr_err("Signal request ignored by handler\n");
return -ENOPROTOOPT;
}
--
1.9.2
Jiri Slaby
2014-04-18 09:22:05 UTC
Permalink
From: Florian Westphal <***@strlen.de>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit e588e2f286ed7da011ed357c24c5b9a554e26595 ]

Quoting Alexander Aring:
While fragmentation and unloading of 6lowpan module I got this kernel Oops
after few seconds:

BUG: unable to handle kernel paging request at f88bbc30
[..]
Modules linked in: ipv6 [last unloaded: 6lowpan]
Call Trace:
[<c012af4c>] ? call_timer_fn+0x54/0xb3
[<c012aef8>] ? process_timeout+0xa/0xa
[<c012b66b>] run_timer_softirq+0x140/0x15f

Problem is that incomplete frags are still around after unload; when
their frag expire timer fires, we get crash.

When a netns is removed (also done when unloading module), inet_frag
calls the evictor with 'force' argument to purge remaining frags.

The evictor loop terminates when accounted memory ('work') drops to 0
or the lru-list becomes empty. However, the mem accounting is done
via percpu counters and may not be accurate, i.e. loop may terminate
prematurely.

Alter evictor to only stop once the lru list is empty when force is
requested.

Reported-by: Phoebe Buckheister <***@itwm.fraunhofer.de>
Reported-by: Alexander Aring <***@gmail.com>
Tested-by: Alexander Aring <***@gmail.com>
Signed-off-by: Florian Westphal <***@strlen.de>
Acked-by: Eric Dumazet <***@google.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/ipv4/inet_fragment.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c
index e15fb7b2db59..12b80fbfe767 100644
--- a/net/ipv4/inet_fragment.c
+++ b/net/ipv4/inet_fragment.c
@@ -211,7 +211,7 @@ int inet_frag_evictor(struct netns_frags *nf, struct inet_frags *f, bool force)
}

work = frag_mem_limit(nf) - nf->low_thresh;
- while (work > 0) {
+ while (work > 0 || force) {
spin_lock(&nf->lru_lock);

if (list_empty(&nf->lru_list)) {
--
1.9.2
Jiri Slaby
2014-04-18 09:21:47 UTC
Permalink
From: Chris Wilson <***@chris-wilson.co.uk>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit a4945f9522d27e1e6d64a02ad055e83768cb0896 upstream.

The PIPEA quirk is specifically for the issue with the PIPEB PLL on
830gm being slaved to the PIPEA PLL, and so to use PIPEB requires PIPEA
running. i845 doesn't even have the second PLL or pipe, and enabling
the quirk results in a blank DVO LVDS.

Signed-off-by: Chris Wilson <***@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <***@ffwll.ch>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/gpu/drm/i915/intel_display.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 9dcf34f9a22d..5aa836e6e190 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -10073,8 +10073,7 @@ static struct intel_quirk intel_quirks[] = {
/* ThinkPad T60 needs pipe A force quirk (bug #16494) */
{ 0x2782, 0x17aa, 0x201a, quirk_pipea_force },

- /* 830/845 need to leave pipe A & dpll A up */
- { 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
+ /* 830 needs to leave pipe A & dpll A up */
{ 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },

/* Lenovo U160 cannot use SSC on LVDS */
--
1.9.2
Jiri Slaby
2014-04-18 09:21:51 UTC
Permalink
From: Takashi Iwai <***@suse.de>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit c683f427bdc43525f61e26609d34e799e7ea4c12 upstream.

Currently drm_pick_cmdline_mode() doesn't care about the interlace
when the given mode line has no "i" suffix. That is, when there are
multiple entries for the same resolution, an interlace mode might be
picked up just depending on the assigned order, and there is no way to
exclude it.

This patch changes the logic for the mode selection, to prefer the
noninterlace mode unless the interlace mode is explicitly given.
When no matching mode is found, it still tries the interlace mode as
fallback.

Signed-off-by: Takashi Iwai <***@suse.de>
Reviewed-by: Daniel Vetter <***@ffwll.ch>
Signed-off-by: Dave Airlie <***@redhat.com>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/gpu/drm/drm_fb_helper.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 3d13ca6e257f..49557c957be8 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -1163,6 +1163,7 @@ static struct drm_display_mode *drm_pick_cmdline_mode(struct drm_fb_helper_conne
{
struct drm_cmdline_mode *cmdline_mode;
struct drm_display_mode *mode = NULL;
+ bool prefer_non_interlace;

cmdline_mode = &fb_helper_conn->cmdline_mode;
if (cmdline_mode->specified == false)
@@ -1174,6 +1175,8 @@ static struct drm_display_mode *drm_pick_cmdline_mode(struct drm_fb_helper_conne
if (cmdline_mode->rb || cmdline_mode->margins)
goto create_mode;

+ prefer_non_interlace = !cmdline_mode->interlace;
+ again:
list_for_each_entry(mode, &fb_helper_conn->connector->modes, head) {
/* check width/height */
if (mode->hdisplay != cmdline_mode->xres ||
@@ -1188,10 +1191,18 @@ static struct drm_display_mode *drm_pick_cmdline_mode(struct drm_fb_helper_conne
if (cmdline_mode->interlace) {
if (!(mode->flags & DRM_MODE_FLAG_INTERLACE))
continue;
+ } else if (prefer_non_interlace) {
+ if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+ continue;
}
return mode;
}

+ if (prefer_non_interlace) {
+ prefer_non_interlace = false;
+ goto again;
+ }
+
create_mode:
mode = drm_mode_create_from_cmdline_mode(fb_helper_conn->connector->dev,
cmdline_mode);
--
1.9.2
Jiri Slaby
2014-04-18 09:22:08 UTC
Permalink
From: Sabrina Dubroca <***@queasysnail.net>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit c88507fbad8055297c1d1e21e599f46960cbee39 ]

DST_NOCOUNT should only be used if an authorized user adds routes
locally. In case of routes which are added on behalf of router
advertisments this flag must not get used as it allows an unlimited
number of routes getting added remotely.

Signed-off-by: Sabrina Dubroca <***@queasysnail.net>
Acked-by: Hannes Frederic Sowa <***@stressinduktion.org>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/ipv6/route.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 0accb1321dd6..77f81beabbd3 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1500,7 +1500,7 @@ int ip6_route_add(struct fib6_config *cfg)
if (!table)
goto out;

- rt = ip6_dst_alloc(net, NULL, DST_NOCOUNT, table);
+ rt = ip6_dst_alloc(net, NULL, (cfg->fc_flags & RTF_ADDRCONF) ? 0 : DST_NOCOUNT, table);

if (!rt) {
err = -ENOMEM;
--
1.9.2
Jiri Slaby
2014-04-18 09:21:58 UTC
Permalink
From: Daniel Borkmann <***@redhat.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit c485658bae87faccd7aed540fd2ca3ab37992310 ]

While working on ec0223ec48a9 ("net: sctp: fix sctp_sf_do_5_1D_ce to
verify if we/peer is AUTH capable"), we noticed that there's a skb
memory leakage in the error path.

Running the same reproducer as in ec0223ec48a9 and by unconditionally
jumping to the error label (to simulate an error condition) in
sctp_sf_do_5_1D_ce() receive path lets kmemleak detector bark about
the unfreed chunk->auth_chunk skb clone:

Unreferenced object 0xffff8800b8f3a000 (size 256):
comm "softirq", pid 0, jiffies 4294769856 (age 110.757s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
89 ab 75 5e d4 01 58 13 00 00 00 00 00 00 00 00 ..u^..X.........
backtrace:
[<ffffffff816660be>] kmemleak_alloc+0x4e/0xb0
[<ffffffff8119f328>] kmem_cache_alloc+0xc8/0x210
[<ffffffff81566929>] skb_clone+0x49/0xb0
[<ffffffffa0467459>] sctp_endpoint_bh_rcv+0x1d9/0x230 [sctp]
[<ffffffffa046fdbc>] sctp_inq_push+0x4c/0x70 [sctp]
[<ffffffffa047e8de>] sctp_rcv+0x82e/0x9a0 [sctp]
[<ffffffff815abd38>] ip_local_deliver_finish+0xa8/0x210
[<ffffffff815a64af>] nf_reinject+0xbf/0x180
[<ffffffffa04b4762>] nfqnl_recv_verdict+0x1d2/0x2b0 [nfnetlink_queue]
[<ffffffffa04aa40b>] nfnetlink_rcv_msg+0x14b/0x250 [nfnetlink]
[<ffffffff815a3269>] netlink_rcv_skb+0xa9/0xc0
[<ffffffffa04aa7cf>] nfnetlink_rcv+0x23f/0x408 [nfnetlink]
[<ffffffff815a2bd8>] netlink_unicast+0x168/0x250
[<ffffffff815a2fa1>] netlink_sendmsg+0x2e1/0x3f0
[<ffffffff8155cc6b>] sock_sendmsg+0x8b/0xc0
[<ffffffff8155d449>] ___sys_sendmsg+0x369/0x380

What happens is that commit bbd0d59809f9 clones the skb containing
the AUTH chunk in sctp_endpoint_bh_rcv() when having the edge case
that an endpoint requires COOKIE-ECHO chunks to be authenticated:

---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ---------->
<------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] ---------
------------------ AUTH; COOKIE-ECHO ---------------->
<-------------------- COOKIE-ACK ---------------------

When we enter sctp_sf_do_5_1D_ce() and before we actually get to
the point where we process (and subsequently free) a non-NULL
chunk->auth_chunk, we could hit the "goto nomem_init" path from
an error condition and thus leave the cloned skb around w/o
freeing it.

The fix is to centrally free such clones in sctp_chunk_destroy()
handler that is invoked from sctp_chunk_free() after all refs have
dropped; and also move both kfree_skb(chunk->auth_chunk) there,
so that chunk->auth_chunk is either NULL (since sctp_chunkify()
allocs new chunks through kmem_cache_zalloc()) or non-NULL with
a valid skb pointer. chunk->skb and chunk->auth_chunk are the
only skbs in the sctp_chunk structure that need to be handeled.

While at it, we should use consume_skb() for both. It is the same
as dev_kfree_skb() but more appropriately named as we are not
a device but a protocol. Also, this effectively replaces the
kfree_skb() from both invocations into consume_skb(). Functions
are the same only that kfree_skb() assumes that the frame was
being dropped after a failure (e.g. for tools like drop monitor),
usage of consume_skb() seems more appropriate in function
sctp_chunk_destroy() though.

Fixes: bbd0d59809f9 ("[SCTP]: Implement the receive and verification of AUTH chunk")
Signed-off-by: Daniel Borkmann <***@redhat.com>
Cc: Vlad Yasevich <***@gmail.com>
Cc: Neil Horman <***@tuxdriver.com>
Acked-by: Vlad Yasevich <***@gmail.com>
Acked-by: Neil Horman <***@tuxdriver.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/sctp/sm_make_chunk.c | 4 ++--
net/sctp/sm_statefuns.c | 5 -----
2 files changed, 2 insertions(+), 7 deletions(-)

diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index d244a23ab8d3..26be077b8267 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -1433,8 +1433,8 @@ static void sctp_chunk_destroy(struct sctp_chunk *chunk)
BUG_ON(!list_empty(&chunk->list));
list_del_init(&chunk->transmitted_list);

- /* Free the chunk skb data and the SCTP_chunk stub itself. */
- dev_kfree_skb(chunk->skb);
+ consume_skb(chunk->skb);
+ consume_skb(chunk->auth_chunk);

SCTP_DBG_OBJCNT_DEC(chunk);
kmem_cache_free(sctp_chunk_cachep, chunk);
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 56ebe71cfe13..0a5f0508c43a 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -761,7 +761,6 @@ sctp_disposition_t sctp_sf_do_5_1D_ce(struct net *net,

/* Make sure that we and the peer are AUTH capable */
if (!net->sctp.auth_enable || !new_asoc->peer.auth_capable) {
- kfree_skb(chunk->auth_chunk);
sctp_association_free(new_asoc);
return sctp_sf_pdiscard(net, ep, asoc, type, arg, commands);
}
@@ -776,10 +775,6 @@ sctp_disposition_t sctp_sf_do_5_1D_ce(struct net *net,
auth.transport = chunk->transport;

ret = sctp_sf_authenticate(net, ep, new_asoc, type, &auth);
-
- /* We can now safely free the auth_chunk clone */
- kfree_skb(chunk->auth_chunk);
-
if (ret != SCTP_IERROR_NO_ERROR) {
sctp_association_free(new_asoc);
return sctp_sf_pdiscard(net, ep, asoc, type, arg, commands);
--
1.9.2
Jiri Slaby
2014-04-18 09:22:03 UTC
Permalink
From: Erik Hugne <***@ericsson.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit 1bb8dce57f4d15233688c68990852a10eb1cd79f ]

When the TIPC module is removed, the tasklet handler is disabled
before all other subsystems. This will cause lingering publications
in the name table because the node_down tasklets responsible to
clean up publications from an unreachable node will never run.
When the name table is shut down, these publications are detected
and an error message is logged:
tipc: nametbl_stop(): orphaned hash chain detected
This is actually a memory leak, introduced with commit
993b858e37b3120ee76d9957a901cca22312ffaa ("tipc: correct the order
of stopping services at rmmod")

Instead of just logging an error and leaking memory, we free
the orphaned entries during nametable shutdown.

Signed-off-by: Erik Hugne <***@ericsson.com>
Reviewed-by: Jon Maloy <***@ericsson.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/tipc/name_table.c | 37 ++++++++++++++++++++++++++++++++++---
1 file changed, 34 insertions(+), 3 deletions(-)

diff --git a/net/tipc/name_table.c b/net/tipc/name_table.c
index 09dcd54b04e1..299e45af7e4e 100644
--- a/net/tipc/name_table.c
+++ b/net/tipc/name_table.c
@@ -942,20 +942,51 @@ int tipc_nametbl_init(void)
return 0;
}

+/**
+ * tipc_purge_publications - remove all publications for a given type
+ *
+ * tipc_nametbl_lock must be held when calling this function
+ */
+static void tipc_purge_publications(struct name_seq *seq)
+{
+ struct publication *publ, *safe;
+ struct sub_seq *sseq;
+ struct name_info *info;
+
+ if (!seq->sseqs) {
+ nameseq_delete_empty(seq);
+ return;
+ }
+ sseq = seq->sseqs;
+ info = sseq->info;
+ list_for_each_entry_safe(publ, safe, &info->zone_list, zone_list) {
+ tipc_nametbl_remove_publ(publ->type, publ->lower, publ->node,
+ publ->ref, publ->key);
+ }
+}
+
void tipc_nametbl_stop(void)
{
u32 i;
+ struct name_seq *seq;
+ struct hlist_head *seq_head;
+ struct hlist_node *safe;

if (!table.types)
return;

- /* Verify name table is empty, then release it */
+ /* Verify name table is empty and purge any lingering
+ * publications, then release the name table
+ */
write_lock_bh(&tipc_nametbl_lock);
for (i = 0; i < TIPC_NAMETBL_SIZE; i++) {
if (hlist_empty(&table.types[i]))
continue;
- pr_err("nametbl_stop(): orphaned hash chain detected\n");
- break;
+ seq_head = &table.types[i];
+ hlist_for_each_entry_safe(seq, safe, seq_head, ns_list) {
+ tipc_purge_publications(seq);
+ }
+ continue;
}
kfree(table.types);
table.types = NULL;
--
1.9.2
Jiri Slaby
2014-04-18 09:22:02 UTC
Permalink
From: Erik Hugne <***@ericsson.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

[ Upstream commit edcc0511b5ee7235282a688cd604e3ae7f9e1fc9 ]

When a topology server subscriber is disconnected, the associated
connection id is set to zero. A check vs zero is then done in the
subscription timeout function to see if the subscriber have been
shut down. This is unnecessary, because all subscription timers
will be cancelled when a subscriber terminates. Setting the
connection id to zero is actually harmful because id zero is the
identity of the topology server listening socket, and can cause a
race that leads to this socket being closed instead.

Signed-off-by: Erik Hugne <***@ericsson.com>
Acked-by: Ying Xue <***@windriver.com>
Reviewed-by: Jon Maloy <***@ericsson.com>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/tipc/subscr.c | 11 -----------
1 file changed, 11 deletions(-)

diff --git a/net/tipc/subscr.c b/net/tipc/subscr.c
index 13f48bb5e540..78bdf1db4cdf 100644
--- a/net/tipc/subscr.c
+++ b/net/tipc/subscr.c
@@ -149,14 +149,6 @@ static void subscr_timeout(struct tipc_subscription *sub)
/* The spin lock per subscriber is used to protect its members */
spin_lock_bh(&subscriber->lock);

- /* Validate if the connection related to the subscriber is
- * closed (in case subscriber is terminating)
- */
- if (subscriber->conid == 0) {
- spin_unlock_bh(&subscriber->lock);
- return;
- }
-
/* Validate timeout (in case subscription is being cancelled) */
if (sub->timeout == TIPC_WAIT_FOREVER) {
spin_unlock_bh(&subscriber->lock);
@@ -211,9 +203,6 @@ static void subscr_release(struct tipc_subscriber *subscriber)

spin_lock_bh(&subscriber->lock);

- /* Invalidate subscriber reference */
- subscriber->conid = 0;
-
/* Destroy any existing subscriptions for subscriber */
list_for_each_entry_safe(sub, sub_temp, &subscriber->subscription_list,
subscription_list) {
--
1.9.2
Jiri Slaby
2014-04-18 09:21:48 UTC
Permalink
From: Martin Koegler <***@chello.at>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit 99d4a8ae93ead27b5a88cdbd09dc556fe96ac3a8 upstream.

Xorg fbdev driver requires smem_start/smem_len, otherwise
it tries to map 0 bytes as video memory.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=856760
Signed-off-by: Martin Koegler <***@chello.at>
Signed-off-by: Takashi Iwai <***@suse.de>
Signed-off-by: Dave Airlie <***@redhat.com>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/gpu/drm/cirrus/cirrus_fbdev.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/cirrus/cirrus_fbdev.c b/drivers/gpu/drm/cirrus/cirrus_fbdev.c
index 86d779a9c245..32bbba0a787b 100644
--- a/drivers/gpu/drm/cirrus/cirrus_fbdev.c
+++ b/drivers/gpu/drm/cirrus/cirrus_fbdev.c
@@ -233,6 +233,9 @@ static int cirrusfb_create(struct drm_fb_helper *helper,
info->apertures->ranges[0].base = cdev->dev->mode_config.fb_base;
info->apertures->ranges[0].size = cdev->mc.vram_size;

+ info->fix.smem_start = cdev->dev->mode_config.fb_base;
+ info->fix.smem_len = cdev->mc.vram_size;
+
info->screen_base = sysram;
info->screen_size = size;
--
1.9.2
Jiri Slaby
2014-04-18 09:21:59 UTC
Permalink
=46rom: Linus L=C3=BCssing <***@web.de>

3.12-stable review patch. If anyone has any objections, please let me =
know.

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

[ Upstream commit 6565b9eeef194afbb3beec80d6dd2447f4091f8c ]

MLD queries are supposed to have an IPv6 link-local source address
according to RFC2710, section 4 and RFC3810, section 5.1.14. This patch
adds a sanity check to ignore such broken MLD queries.

Without this check, such malformed MLD queries can result in a
denial of service: The queries are ignored by any MLD listener
therefore they will not respond with an MLD report. However,
without this patch these malformed MLD queries would enable the
snooping part in the bridge code, potentially shutting down the
according ports towards these hosts for multicast traffic as the
bridge did not learn about these listeners.

Reported-by: Jan Stancek <***@redhat.com>
Signed-off-by: Linus L=C3=BCssing <***@web.de>
Reviewed-by: Hannes Frederic Sowa <***@stressinduktion.org>
Signed-off-by: David S. Miller <***@davemloft.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/bridge/br_multicast.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
index 1b148a3affa7..b98627e902e7 100644
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -1238,6 +1238,12 @@ static int br_ip6_multicast_query(struct net_bri=
dge *br,
(port && port->state =3D=3D BR_STATE_DISABLED))
goto out;
=20
+ /* RFC2710+RFC3810 (MLDv1+MLDv2) require link-local source addresses =
*/
+ if (!(ipv6_addr_type(&ip6h->saddr) & IPV6_ADDR_LINKLOCAL)) {
+ err =3D -EINVAL;
+ goto out;
+ }
+
if (skb->len =3D=3D sizeof(*mld)) {
if (!pskb_may_pull(skb, sizeof(*mld))) {
err =3D -EINVAL;
--=20
1.9.2
Jiri Slaby
2014-04-18 09:21:49 UTC
Permalink
=46rom: Alex Deucher <***@amd.com>

3.12-stable review patch. If anyone has any objections, please let me =
know.

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

commit 832eafaf34ff7d0348fe701e417900c6cf1f5656 upstream.

Disable audio around audio hw setup. This may avoid
hangs on certain asics.

Signed-off-by: Alex Deucher <***@amd.com>
Reviewed-by: Christian K=C3=B6nig <***@amd.com>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/gpu/drm/radeon/dce6_afmt.c | 13 ++++++++-----
drivers/gpu/drm/radeon/evergreen_hdmi.c | 26 +++++++++++++++----------=
-
drivers/gpu/drm/radeon/r600_audio.c | 14 ++++++++------
drivers/gpu/drm/radeon/r600_hdmi.c | 12 +++++++-----
drivers/gpu/drm/radeon/radeon.h | 6 ++++++
5 files changed, 44 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/radeon/dce6_afmt.c b/drivers/gpu/drm/radeo=
n/dce6_afmt.c
index 2a2879e53bd5..bbcd2dd653a3 100644
--- a/drivers/gpu/drm/radeon/dce6_afmt.c
+++ b/drivers/gpu/drm/radeon/dce6_afmt.c
@@ -226,13 +226,15 @@ static int dce6_audio_chipset_supported(struct ra=
deon_device *rdev)
return !ASIC_IS_NODCE(rdev);
}
=20
-static void dce6_audio_enable(struct radeon_device *rdev,
- struct r600_audio_pin *pin,
- bool enable)
+void dce6_audio_enable(struct radeon_device *rdev,
+ struct r600_audio_pin *pin,
+ bool enable)
{
+ if (!pin)
+ return;
+
WREG32_ENDPOINT(pin->offset, AZ_F0_CODEC_PIN_CONTROL_HOTPLUG_CONTROL,
enable ? AUDIO_ENABLED : 0);
- DRM_INFO("%s audio %d support\n", enable ? "Enabling" : "Disabling", =
pin->id);
}
=20
static const u32 pin_offsets[7] =3D
@@ -269,7 +271,8 @@ int dce6_audio_init(struct radeon_device *rdev)
rdev->audio.pin[i].connected =3D false;
rdev->audio.pin[i].offset =3D pin_offsets[i];
rdev->audio.pin[i].id =3D i;
- dce6_audio_enable(rdev, &rdev->audio.pin[i], true);
+ /* disable audio. it will be set up later */
+ dce6_audio_enable(rdev, &rdev->audio.pin[i], false);
}
=20
return 0;
diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/=
radeon/evergreen_hdmi.c
index b347fffa4519..da4e504b78a4 100644
--- a/drivers/gpu/drm/radeon/evergreen_hdmi.c
+++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c
@@ -257,6 +257,15 @@ void evergreen_hdmi_setmode(struct drm_encoder *en=
coder, struct drm_display_mode
return;
offset =3D dig->afmt->offset;
=20
+ /* disable audio prior to setting up hw */
+ if (ASIC_IS_DCE6(rdev)) {
+ dig->afmt->pin =3D dce6_audio_get_pin(rdev);
+ dce6_audio_enable(rdev, dig->afmt->pin, false);
+ } else {
+ dig->afmt->pin =3D r600_audio_get_pin(rdev);
+ r600_audio_enable(rdev, dig->afmt->pin, false);
+ }
+
evergreen_audio_set_dto(encoder, mode->clock);
=20
WREG32(HDMI_VBI_PACKET_CONTROL + offset,
@@ -358,12 +367,16 @@ void evergreen_hdmi_setmode(struct drm_encoder *e=
ncoder, struct drm_display_mode
WREG32(AFMT_RAMP_CONTROL1 + offset, 0x007FFFFF);
WREG32(AFMT_RAMP_CONTROL2 + offset, 0x00000001);
WREG32(AFMT_RAMP_CONTROL3 + offset, 0x00000001);
+
+ /* enable audio after to setting up hw */
+ if (ASIC_IS_DCE6(rdev))
+ dce6_audio_enable(rdev, dig->afmt->pin, true);
+ else
+ r600_audio_enable(rdev, dig->afmt->pin, true);
}
=20
void evergreen_hdmi_enable(struct drm_encoder *encoder, bool enable)
{
- struct drm_device *dev =3D encoder->dev;
- struct radeon_device *rdev =3D dev->dev_private;
struct radeon_encoder *radeon_encoder =3D to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig =3D radeon_encoder->enc_priv;
=20
@@ -376,15 +389,6 @@ void evergreen_hdmi_enable(struct drm_encoder *enc=
oder, bool enable)
if (!enable && !dig->afmt->enabled)
return;
=20
- if (enable) {
- if (ASIC_IS_DCE6(rdev))
- dig->afmt->pin =3D dce6_audio_get_pin(rdev);
- else
- dig->afmt->pin =3D r600_audio_get_pin(rdev);
- } else {
- dig->afmt->pin =3D NULL;
- }
-
dig->afmt->enabled =3D enable;
=20
DRM_DEBUG("%sabling HDMI interface @ 0x%04X for encoder 0x%x\n",
diff --git a/drivers/gpu/drm/radeon/r600_audio.c b/drivers/gpu/drm/rade=
on/r600_audio.c
index 47fc2b886979..bffac10c4296 100644
--- a/drivers/gpu/drm/radeon/r600_audio.c
+++ b/drivers/gpu/drm/radeon/r600_audio.c
@@ -142,12 +142,15 @@ void r600_audio_update_hdmi(struct work_struct *w=
ork)
}
=20
/* enable the audio stream */
-static void r600_audio_enable(struct radeon_device *rdev,
- struct r600_audio_pin *pin,
- bool enable)
+void r600_audio_enable(struct radeon_device *rdev,
+ struct r600_audio_pin *pin,
+ bool enable)
{
u32 value =3D 0;
=20
+ if (!pin)
+ return;
+
if (ASIC_IS_DCE4(rdev)) {
if (enable) {
value |=3D 0x81000000; /* Required to enable audio */
@@ -158,7 +161,6 @@ static void r600_audio_enable(struct radeon_device =
*rdev,
WREG32_P(R600_AUDIO_ENABLE,
enable ? 0x81000000 : 0x0, ~0x81000000);
}
- DRM_INFO("%s audio %d support\n", enable ? "Enabling" : "Disabling", =
pin->id);
}
=20
/*
@@ -178,8 +180,8 @@ int r600_audio_init(struct radeon_device *rdev)
rdev->audio.pin[0].status_bits =3D 0;
rdev->audio.pin[0].category_code =3D 0;
rdev->audio.pin[0].id =3D 0;
-
- r600_audio_enable(rdev, &rdev->audio.pin[0], true);
+ /* disable audio. it will be set up later */
+ r600_audio_enable(rdev, &rdev->audio.pin[0], false);
=20
return 0;
}
diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeo=
n/r600_hdmi.c
index 7f3b0d9aaada..9ba0675d0682 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -446,6 +446,10 @@ void r600_hdmi_setmode(struct drm_encoder *encoder=
, struct drm_display_mode *mod
return;
offset =3D dig->afmt->offset;
=20
+ /* disable audio prior to setting up hw */
+ dig->afmt->pin =3D r600_audio_get_pin(rdev);
+ r600_audio_enable(rdev, dig->afmt->pin, false);
+
r600_audio_set_dto(encoder, mode->clock);
=20
WREG32(HDMI0_VBI_PACKET_CONTROL + offset,
@@ -517,6 +521,9 @@ void r600_hdmi_setmode(struct drm_encoder *encoder,=
struct drm_display_mode *mod
WREG32(HDMI0_RAMP_CONTROL3 + offset, 0x00000001);
=20
r600_hdmi_audio_workaround(encoder);
+
+ /* enable audio after to setting up hw */
+ r600_audio_enable(rdev, dig->afmt->pin, true);
}
=20
/*
@@ -637,11 +644,6 @@ void r600_hdmi_enable(struct drm_encoder *encoder,=
bool enable)
if (!enable && !dig->afmt->enabled)
return;
=20
- if (enable)
- dig->afmt->pin =3D r600_audio_get_pin(rdev);
- else
- dig->afmt->pin =3D NULL;
-
/* Older chipsets require setting HDMI and routing manually */
if (!ASIC_IS_DCE3(rdev)) {
if (enable)
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/r=
adeon.h
index f44ca5853ff2..b11433f75578 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -2717,6 +2717,12 @@ int radeon_vm_bo_rmv(struct radeon_device *rdev,
void r600_audio_update_hdmi(struct work_struct *work);
struct r600_audio_pin *r600_audio_get_pin(struct radeon_device *rdev);
struct r600_audio_pin *dce6_audio_get_pin(struct radeon_device *rdev);
+void r600_audio_enable(struct radeon_device *rdev,
+ struct r600_audio_pin *pin,
+ bool enable);
+void dce6_audio_enable(struct radeon_device *rdev,
+ struct r600_audio_pin *pin,
+ bool enable);
=20
/*
* R600 vram scratch functions
--=20
1.9.2
Jiri Slaby
2014-04-18 09:21:46 UTC
Permalink
From: Jiri Kosina <***@suse.cz>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit 7b7b68bba5ef23734c35ffb0d8d82079ed604d33 upstream.

In case reading of block 0 during open() fails, it is not the right thing
to let open() succeed.

Fix this by introducing FD_OPEN_SHOULD_FAIL_BIT flag, and setting it in
case the bio callback encounters an error while trying to read block 0.

As a bonus, this works around certain broken userspace (blkid), which is
not able to properly handle read()s returning IO errors. Hence be nice to
those, and bail out during open() already; if block 0 is not readable,
read()s are not going to provide any meaningful data anyway.

Signed-off-by: Jiri Kosina <***@suse.cz>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/block/floppy.c | 36 +++++++++++++++++++++++++++---------
include/uapi/linux/fd.h | 3 ++-
2 files changed, 29 insertions(+), 10 deletions(-)

diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 04ceb7e2fadd..690011de912a 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -3691,9 +3691,12 @@ static int floppy_open(struct block_device *bdev, fmode_t mode)
if (!(mode & FMODE_NDELAY)) {
if (mode & (FMODE_READ|FMODE_WRITE)) {
UDRS->last_checked = 0;
+ clear_bit(FD_OPEN_SHOULD_FAIL_BIT, &UDRS->flags);
check_disk_change(bdev);
if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags))
goto out;
+ if (test_bit(FD_OPEN_SHOULD_FAIL_BIT, &UDRS->flags))
+ goto out;
}
res = -EROFS;
if ((mode & FMODE_WRITE) &&
@@ -3746,17 +3749,29 @@ static unsigned int floppy_check_events(struct gendisk *disk,
* a disk in the drive, and whether that disk is writable.
*/

-static void floppy_rb0_complete(struct bio *bio, int err)
+struct rb0_cbdata {
+ int drive;
+ struct completion complete;
+};
+
+static void floppy_rb0_cb(struct bio *bio, int err)
{
- complete((struct completion *)bio->bi_private);
+ struct rb0_cbdata *cbdata = (struct rb0_cbdata *)bio->bi_private;
+ int drive = cbdata->drive;
+
+ if (err) {
+ pr_info("floppy: error %d while reading block 0", err);
+ set_bit(FD_OPEN_SHOULD_FAIL_BIT, &UDRS->flags);
+ }
+ complete(&cbdata->complete);
}

-static int __floppy_read_block_0(struct block_device *bdev)
+static int __floppy_read_block_0(struct block_device *bdev, int drive)
{
struct bio bio;
struct bio_vec bio_vec;
- struct completion complete;
struct page *page;
+ struct rb0_cbdata cbdata;
size_t size;

page = alloc_page(GFP_NOIO);
@@ -3769,6 +3784,8 @@ static int __floppy_read_block_0(struct block_device *bdev)
if (!size)
size = 1024;

+ cbdata.drive = drive;
+
bio_init(&bio);
bio.bi_io_vec = &bio_vec;
bio_vec.bv_page = page;
@@ -3779,13 +3796,14 @@ static int __floppy_read_block_0(struct block_device *bdev)
bio.bi_bdev = bdev;
bio.bi_sector = 0;
bio.bi_flags = (1 << BIO_QUIET);
- init_completion(&complete);
- bio.bi_private = &complete;
- bio.bi_end_io = floppy_rb0_complete;
+ bio.bi_private = &cbdata;
+ bio.bi_end_io = floppy_rb0_cb;

submit_bio(READ, &bio);
process_fd_request();
- wait_for_completion(&complete);
+
+ init_completion(&cbdata.complete);
+ wait_for_completion(&cbdata.complete);

__free_page(page);

@@ -3827,7 +3845,7 @@ static int floppy_revalidate(struct gendisk *disk)
UDRS->generation++;
if (drive_no_geom(drive)) {
/* auto-sensing */
- res = __floppy_read_block_0(opened_bdev[drive]);
+ res = __floppy_read_block_0(opened_bdev[drive], drive);
} else {
if (cf)
poll_drive(false, FD_RAW_NEED_DISK);
diff --git a/include/uapi/linux/fd.h b/include/uapi/linux/fd.h
index f1f3dd5981b2..84c517cbce90 100644
--- a/include/uapi/linux/fd.h
+++ b/include/uapi/linux/fd.h
@@ -185,7 +185,8 @@ enum {
* to clear media change status */
FD_UNUSED_BIT,
FD_DISK_CHANGED_BIT, /* disk has been changed since last i/o */
- FD_DISK_WRITABLE_BIT /* disk is writable */
+ FD_DISK_WRITABLE_BIT, /* disk is writable */
+ FD_OPEN_SHOULD_FAIL_BIT
};

#define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params)
--
1.9.2
Jiri Slaby
2014-04-18 09:21:39 UTC
Permalink
From: Heiko Carstens <***@de.ibm.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit 03b8c7b623c80af264c4c8d6111e5c6289933666 upstream.

If an architecture has futex_atomic_cmpxchg_inatomic() implemented and there
is no runtime check necessary, allow to skip the test within futex_init().

This allows to get rid of some code which would always give the same result,
and also allows the compiler to optimize a couple of if statements away.

Signed-off-by: Heiko Carstens <***@de.ibm.com>
Cc: Finn Thain <***@telegraphics.com.au>
Cc: Geert Uytterhoeven <***@linux-m68k.org>
Link: http://lkml.kernel.org/r/***@osiris
Signed-off-by: Thomas Gleixner <***@linutronix.de>
[geert: Backported to v3.10..v3.13]
Signed-off-by: Geert Uytterhoeven <***@linux-m68k.org>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
arch/s390/Kconfig | 1 +
include/linux/futex.h | 4 ++++
init/Kconfig | 7 +++++++
kernel/futex.c | 14 ++++++++++++--
4 files changed, 24 insertions(+), 2 deletions(-)

diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 3e01afa21710..6671e8db1861 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -116,6 +116,7 @@ config S390
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
+ select HAVE_FUTEX_CMPXCHG if FUTEX
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZ4
diff --git a/include/linux/futex.h b/include/linux/futex.h
index b0d95cac826e..6435f46d6e13 100644
--- a/include/linux/futex.h
+++ b/include/linux/futex.h
@@ -55,7 +55,11 @@ union futex_key {
#ifdef CONFIG_FUTEX
extern void exit_robust_list(struct task_struct *curr);
extern void exit_pi_state_list(struct task_struct *curr);
+#ifdef CONFIG_HAVE_FUTEX_CMPXCHG
+#define futex_cmpxchg_enabled 1
+#else
extern int futex_cmpxchg_enabled;
+#endif
#else
static inline void exit_robust_list(struct task_struct *curr)
{
diff --git a/init/Kconfig b/init/Kconfig
index 3ecd8a1178f1..d42dc7c6ba64 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1406,6 +1406,13 @@ config FUTEX
support for "fast userspace mutexes". The resulting kernel may not
run glibc-based applications correctly.

+config HAVE_FUTEX_CMPXCHG
+ bool
+ help
+ Architectures should select this if futex_atomic_cmpxchg_inatomic()
+ is implemented and always working. This removes a couple of runtime
+ checks.
+
config EPOLL
bool "Enable eventpoll support" if EXPERT
default y
diff --git a/kernel/futex.c b/kernel/futex.c
index 231754863a87..d8347b7a064f 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -68,7 +68,9 @@

#include "rtmutex_common.h"

+#ifndef CONFIG_HAVE_FUTEX_CMPXCHG
int __read_mostly futex_cmpxchg_enabled;
+#endif

#define FUTEX_HASHBITS (CONFIG_BASE_SMALL ? 4 : 8)

@@ -2731,10 +2733,10 @@ SYSCALL_DEFINE6(futex, u32 __user *, uaddr, int, op, u32, val,
return do_futex(uaddr, op, val, tp, uaddr2, val2, val3);
}

-static int __init futex_init(void)
+static void __init futex_detect_cmpxchg(void)
{
+#ifndef CONFIG_HAVE_FUTEX_CMPXCHG
u32 curval;
- int i;

/*
* This will fail and we want it. Some arch implementations do
@@ -2748,6 +2750,14 @@ static int __init futex_init(void)
*/
if (cmpxchg_futex_value_locked(&curval, NULL, 0, 0) == -EFAULT)
futex_cmpxchg_enabled = 1;
+#endif
+}
+
+static int __init futex_init(void)
+{
+ int i;
+
+ futex_detect_cmpxchg();

for (i = 0; i < ARRAY_SIZE(futex_queues); i++) {
plist_head_init(&futex_queues[i].chain);
--
1.9.2
Jiri Slaby
2014-04-18 09:21:37 UTC
Permalink
From: Sebastian Hesselbarth <***@gmail.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit b42285f66f871a9898a0e79e2d74bc7e7a101995 upstream.

The clock passed to PCI controller found on MVEBU SoCs may come from a
clock gate. This requires the clock to be enabled before any registers
are accessed. Therefore, move the clock enable before register iomap to
ensure it is enabled.

Signed-off-by: Sebastian Hesselbarth <***@gmail.com>
Signed-off-by: Jason Cooper <***@lakedaemon.net>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
drivers/pci/host/pci-mvebu.c | 25 ++++++++++++-------------
1 file changed, 12 insertions(+), 13 deletions(-)

diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
index 1953c1680986..8efd11dafd44 100644
--- a/drivers/pci/host/pci-mvebu.c
+++ b/drivers/pci/host/pci-mvebu.c
@@ -866,11 +866,23 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
continue;
}

+ port->clk = of_clk_get_by_name(child, NULL);
+ if (IS_ERR(port->clk)) {
+ dev_err(&pdev->dev, "PCIe%d.%d: cannot get clock\n",
+ port->port, port->lane);
+ continue;
+ }
+
+ ret = clk_prepare_enable(port->clk);
+ if (ret)
+ continue;
+
port->base = mvebu_pcie_map_registers(pdev, child, port);
if (IS_ERR(port->base)) {
dev_err(&pdev->dev, "PCIe%d.%d: cannot map registers\n",
port->port, port->lane);
port->base = NULL;
+ clk_disable_unprepare(port->clk);
continue;
}

@@ -886,22 +898,9 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
port->port, port->lane);
}

- port->clk = of_clk_get_by_name(child, NULL);
- if (IS_ERR(port->clk)) {
- dev_err(&pdev->dev, "PCIe%d.%d: cannot get clock\n",
- port->port, port->lane);
- iounmap(port->base);
- port->haslink = 0;
- continue;
- }
-
port->dn = child;
-
- clk_prepare_enable(port->clk);
spin_lock_init(&port->conf_lock);
-
mvebu_sw_pci_bridge_init(port);
-
i++;
}
--
1.9.2
Jiri Slaby
2014-04-18 09:21:40 UTC
Permalink
From: Finn Thain <***@telegraphics.com.au>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit e571c58f313d35c56e0018470e3375ddd1fd320e upstream.

Skip the futex_atomic_cmpxchg_inatomic() test in futex_init(). It causes a
fatal exception on 68030 (and presumably 68020 also).

Signed-off-by: Finn Thain <***@telegraphics.com.au>
Acked-by: Geert Uytterhoeven <***@linux-m68k.org>
Link: http://lkml.kernel.org/r/***@nippy.intranet
Signed-off-by: Thomas Gleixner <***@linutronix.de>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
arch/m68k/Kconfig | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 311a300d48cc..ee121a0f5b00 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -16,6 +16,7 @@ config M68K
select FPU if MMU
select ARCH_WANT_IPC_PARSE_VERSION
select ARCH_USES_GETTIMEOFFSET if MMU && !COLDFIRE
+ select HAVE_FUTEX_CMPXCHG if MMU && FUTEX
select HAVE_MOD_ARCH_SPECIFIC
select MODULES_USE_ELF_REL
select MODULES_USE_ELF_RELA
--
1.9.2
Jiri Slaby
2014-04-18 09:21:44 UTC
Permalink
From: Trond Myklebust <***@primarydata.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit 628356791b04ea988fee070f66a748a823d001bb upstream.

The call to xprt_free_allocation() will call list_del() on
req->rq_bc_pa_list, which is not attached to a list.
This patch moves the list_del() out of xprt_free_allocation()
and into those callers that need it.

Signed-off-by: Trond Myklebust <***@primarydata.com>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
net/sunrpc/backchannel_rqst.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/sunrpc/backchannel_rqst.c b/net/sunrpc/backchannel_rqst.c
index 890a29912d5a..e860d4f7ed2a 100644
--- a/net/sunrpc/backchannel_rqst.c
+++ b/net/sunrpc/backchannel_rqst.c
@@ -64,7 +64,6 @@ static void xprt_free_allocation(struct rpc_rqst *req)
free_page((unsigned long)xbufp->head[0].iov_base);
xbufp = &req->rq_snd_buf;
free_page((unsigned long)xbufp->head[0].iov_base);
- list_del(&req->rq_bc_pa_list);
kfree(req);
}

@@ -168,8 +167,10 @@ out_free:
/*
* Memory allocation failed, free the temporary list
*/
- list_for_each_entry_safe(req, tmp, &tmp_list, rq_bc_pa_list)
+ list_for_each_entry_safe(req, tmp, &tmp_list, rq_bc_pa_list) {
+ list_del(&req->rq_bc_pa_list);
xprt_free_allocation(req);
+ }

dprintk("RPC: setup backchannel transport failed\n");
return -ENOMEM;
@@ -198,6 +199,7 @@ void xprt_destroy_backchannel(struct rpc_xprt *xprt, unsigned int max_reqs)
xprt_dec_alloc_count(xprt, max_reqs);
list_for_each_entry_safe(req, tmp, &xprt->bc_pa_list, rq_bc_pa_list) {
dprintk("RPC: req=%p\n", req);
+ list_del(&req->rq_bc_pa_list);
xprt_free_allocation(req);
if (--max_reqs == 0)
break;
--
1.9.2
Jiri Slaby
2014-04-18 09:21:43 UTC
Permalink
From: Trond Myklebust <***@primarydata.com>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit 8f493b9cfcd8941c6b27d6ce8e3b4a78c094b3c1 upstream.

nfs3_proc_setacls is used internally by the NFSv3 create operations
to set the acl after the file has been created. If the operation
fails because the server doesn't support acls, then it must return '0',
not -EOPNOTSUPP.

Reported-by: Russell King <***@arm.linux.org.uk>
Link: http://lkml.kernel.org/r/***@n2100.arm.linux.org.uk
Cc: Christoph Hellwig <***@lst.de>
Tested-by: Takashi Iwai <***@suse.de>
Signed-off-by: Trond Myklebust <***@primarydata.com>
Acked-by: NeilBrown <***@suse.de>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
fs/nfs/nfs3acl.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/fs/nfs/nfs3acl.c b/fs/nfs/nfs3acl.c
index 4a1aafba6a20..4612291e7cc0 100644
--- a/fs/nfs/nfs3acl.c
+++ b/fs/nfs/nfs3acl.c
@@ -289,8 +289,8 @@ getout:
return acl;
}

-static int nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl,
- struct posix_acl *dfacl)
+static int __nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl,
+ struct posix_acl *dfacl)
{
struct nfs_server *server = NFS_SERVER(inode);
struct nfs_fattr *fattr;
@@ -373,6 +373,15 @@ out:
return status;
}

+int nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl,
+ struct posix_acl *dfacl)
+{
+ int ret;
+ ret = __nfs3_proc_setacls(inode, acl, dfacl);
+ return (ret == -EOPNOTSUPP) ? 0 : ret;
+
+}
+
int nfs3_proc_setacl(struct inode *inode, int type, struct posix_acl *acl)
{
struct posix_acl *alloc = NULL, *dfacl = NULL;
@@ -406,7 +415,7 @@ int nfs3_proc_setacl(struct inode *inode, int type, struct posix_acl *acl)
if (IS_ERR(alloc))
goto fail;
}
- status = nfs3_proc_setacls(inode, acl, dfacl);
+ status = __nfs3_proc_setacls(inode, acl, dfacl);
posix_acl_release(alloc);
return status;
--
1.9.2
Jiri Slaby
2014-04-18 09:21:45 UTC
Permalink
From: Jan Kara <***@suse.cz>

3.12-stable review patch. If anyone has any objections, please let me know.

===============

commit 10542c229a4e8e25b40357beea66abe9dacda2c0 upstream.

When doing filesystem wide sync, there's no need to force transaction
commit (or synchronously write inode buffer) separately for each inode
because ext4_sync_fs() takes care of forcing commit at the end (VFS
takes care of flushing buffer cache, respectively). Most of the time
this slowness doesn't manifest because previous WB_SYNC_NONE writeback
doesn't leave much to write but when there are processes aggressively
creating new files and several filesystems to sync, the sync slowness
can be noticeable. In the following test script sync(1) takes around 6
minutes when there are two ext4 filesystems mounted on a standard SATA
drive. After this patch sync takes a couple of seconds so we have about
two orders of magnitude improvement.

function run_writers
{
for (( i = 0; i < 10; i++ )); do
mkdir $1/dir$i
for (( j = 0; j < 40000; j++ )); do
dd if=/dev/zero of=$1/dir$i/$j bs=4k count=4 &>/dev/null
done &
done
}

for dir in "$@"; do
run_writers $dir
done

sleep 40
time sync

Signed-off-by: Jan Kara <***@suse.cz>
Signed-off-by: "Theodore Ts'o" <***@mit.edu>
Signed-off-by: Jiri Slaby <***@suse.cz>
---
fs/ext4/inode.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 786bf0708904..f173ef12c97a 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4447,7 +4447,12 @@ int ext4_write_inode(struct inode *inode, struct writeback_control *wbc)
return -EIO;
}

- if (wbc->sync_mode != WB_SYNC_ALL)
+ /*
+ * No need to force transaction in WB_SYNC_NONE mode. Also
+ * ext4_sync_fs() will force the commit after everything is
+ * written.
+ */
+ if (wbc->sync_mode != WB_SYNC_ALL || wbc->for_sync)
return 0;

err = ext4_force_commit(inode->i_sb);
@@ -4457,7 +4462,11 @@ int ext4_write_inode(struct inode *inode, struct writeback_control *wbc)
err = __ext4_get_inode_loc(inode, &iloc, 0);
if (err)
return err;
- if (wbc->sync_mode == WB_SYNC_ALL)
+ /*
+ * sync(2) will flush the whole buffer cache. No need to do
+ * it here separately for each inode.
+ */
+ if (wbc->sync_mode == WB_SYNC_ALL && !wbc->for_sync)
sync_dirty_buffer(iloc.bh);
if (buffer_req(iloc.bh) && !buffer_uptodate(iloc.bh)) {
EXT4_ERROR_INODE_BLOCK(inode, iloc.bh->b_blocknr,
--
1.9.2
Continue reading on narkive:
Loading...